Green Book

Math Resources for Teachers

It has been a whirlwind couple of weeks! I went on a mini-vacation to a wedding in Nashville, and then I attended a 3-day workshop on The Role of Mathematics in the International Baccalaureate Primary Years Programme. I think this is the summer of math learning for me! I love attending workshops because I almost always leave with new ideas and new resources to explore. Even if you don’t work at an IB school, there were lots of useful resources worth exploring.

(Apologies in advance — this will be a long post!)

Book Resources

A Mathematical Passage: Strategies for Promoting Inquiry in Grades 4-6

This book was featured because of it’s Mathematician’s Bill of Rights on p. 139. The Bill of Rights lists the “rights” that all mathematicians have — things like “solve problems in ways that make sense to me” and “capitalize on mistakes as sites of learning.” I’m definitely interested in reading more from this book. I’ve read other things by David J. Whitin before, and they’ve been great.

Math Matters: Understanding the Math You Teach Grades K-8

I had a chance to browse this book during the workshop, and it looks like a good one for understanding how to approach math conceptually. May not be the most exciting read in the world (would you look at that front cover?!), but it looks like a very useful book if you’re going for an inquiry oriented math classroom.

Good Questions for Math Teaching



This book is great for creating open-ended questions that will really get students thinking about the math involved in problem solving rather than just looking for a specific answer. It uses questioning techniques to develop more sophisticated mathematical thinking, and it has a wealth of information.

Number Talks

I was a little surprised how many teachers at the workshop were already familiar with this book and using it given that I’m usually up on all the latest and greatest math books, but nevertheless, this book had rave reviews. Of all the books that I’m reading this summer, this is the one that I suspect will have the biggest impact on my teaching this August. I’ve really enjoyed reading it, and I have so many ideas about how I will put it into practice this year. If you haven’t gotten it already, I couldn’t recommend it more!

Good Questions: Great Ways to Differentiate Mathematics Instruction



I know I’ve talked about this book before, but we spent a lot of time talking about open questions and parallel tasks at the workshop, so I had to share this book again. I used this book non-stop at the end of the school year, and I loved how it was so perfectly aligned to Common Core in math. It couldn’t be more teacher-friendly.

Online Resources

Visible Thinking Routines

I’ve been introduced to the Visible Thinking Routines from Harvard’s Project Zero before, but it was good to be reminded about them. These are some great activities to prompt student discussions and thinking. One example of this is “OTQ – Observe, Think, Question.” For this activity, students see a picture and spend a few minutes describing what they see/observe. Anything they observe has to be rooted in the picture and not based on inferences. Step 2 is “Think” – what does this make you think about? This is where students can share their inferences and cite evidence in the picture to support why they think that. Finally, students “question” and share what they wonder about based on the picture. I like that these routines slow down student thinking.
Math Class Needs a Makeover

We watched this video in the workshop, and if you’ve never seen it, I highly recommend that you take the 10 minutes to watch Dan Meyer’s TED Talk. In it, he talks about the problems with current approaches to math instruction — largely fueled by larger textbooks and math programs — and how to turn those materials into the types of problems that will challenge your students to become patient problem solvers. I was really inspired by this video, and I hope that you will be, too.

Have a great weekend! I’ll be back to blogging more regularly next week!



Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and/or believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

And More: In One Sentence™ – “The RX 470 or The RX 480”? [A Very Short Comparison with Sources, Currently Text-Only]

As done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry’…
For this post, I answer the quite-specific Hardware Upgrading question [mainly as it was one that I was asking myself, so I thought I would share my recent findings with others], ‘should you get the AMD Radeon RX 470 GPU or the RX 480’..?

The Short Version

“Should I buy the 470 or the 480?”

The answer, in-one-sentence, is:

“Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

~ The Game Tips And More Blog’s Answer, In One Sentence™

The Long Version

Again, as done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry'[just like how I spent tons of time on the very creative and original titling of these types of posts..].

Where was I? Oh yes, here then is my summation for a Hardware Purchase Suggestion, a very specific answer for a very specific question in Hardware Upgrading [arrived at after many hours of reading, researching, watching benchmarking videos, all while getting distracted by games, health issues and non-computery-or-techie events in life… but you can skip all of that Life Drama of your own and skip all of the time Researching on your own and just ‘get to the jist’ right here], in one sentence – the answer to the question:

“Should I buy the 470 or the 480?”

The answer, in-one-sentence, is:

“Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

~ The Game Tips And More Blog’s Answer, In One Sentence™

The answer above is based on an average viewpoint of all reviews read and videos watched. Of course, there is always fluctuation in the average amount (sometimes the fps was exactly the same, sometimes it was a quick change in difference [eg. in a video benchmark] by 20fps or slightly more for a short period of time). Also, for some people, money isn’t the issue and they want the higher-shelf RX 480 for the capability it offers. No problem, I’m just presenting what I have seen so far, between the 470 and the 480. If you can “easily” afford the faster product, go for that – but for those who are in the situation where $20 or $40 is a “big step” in price at the moment for them, but they really want to upgrade their aging hardware “now” at the same time – then this summation is for them.

As I always say, if you are looking to upgrade any hardware in your system – and if you have the time to do it:

Do your own research, read lots of reviews, check out prices in multiple places/sites/stores and find out which is the best path for you, at that point in time. No matter what the part is, spend as much as you “comfortably” can (to make it more ‘future proof’). What is the most important/best advice I can give, from 20+ years of technical expertise and real-world experience in the field presented without making a new paragraph so it would be easier to read..? It is this: No matter what computer part you are purchasing, if you are not in a place where “money isn’t an issue”, then watch for “The Jump” in price – that leap or huge gap in prices – and purchase a part that is just in front of that gap (before the large price increase); that is the “Price Sweet Spot”, where you are getting ‘the most bang for your buck’ and other cliche phrases. Most of all though – have fun learning and doing it all!

This Message Brought To You By Troy from The Game Tips And More Blog And Free Websites And Other Things That Made It All Happen

List of Some Sources Researched (not including video benchmark sources):

http://www.techspot.com/review/1220-amd-radeon-rx-470/page2.html
http://www.gamersnexus.net/hwreviews/2544-sapphire-rx-470-platinum-review-benchmark-vs-480-gtx-1060/page-4
http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/73155-amd-radeon-rx-470-4gb-review-4.html
http://www.pcworld.com/article/3104044/components-graphics/amd-radeon-rx-470-review-a-great-graphics-card-with-a-terrible-price.html?page=3
http://wccftech.com/amd-radeon-rx-480-rx-470-3dmark-performance/
https://www.techpowerup.com/reviews/ASUS/RX_470_STRIX_OC/10.html
http://www.tomshardware.com/reviews/amd-radeon-rx-470,4703-4.html

Why Teachers Love Technology

An infographic about “Why Teachers Love Technology” was recently shared with me, and on the heels of yesterday’s post, I felt like now is a good time to share the infographic with you.

What do we Know Infographic
Graphic from OnlineUniversities.com

Do you love technology? I’d love to hear why in the comments section!

Quick Tip: NVIDIA ‘In Game Overlay’ Stopped Working? Here’s How To At Least Get It Going Again [Fix / Workaround, Updated 2018-03-26]

Whether it wants to be called Shadowplay, Share or [as of the time of this post] In-Game Overlay; it doesn’t really matter to most people I think – we just look for something to record our gameplay once in a while, maybe take some Screenshots, ‘and just work’. Thankfully, NVIDIA’s In-Game Overlay [or whatever it may be called by the time I finish this post, heh] does just that. Most of the time.

Although I rotate between a handful of different recording programs off and on (such as Bandicam, Action, Playclaw and others – just for fun and also slowly working on another ‘Game Recording Comparison’ for the future), In-Game Overlay [built into the NVIDIA Drivers, aka “for free”] records when I want, it records a Buffered Loop (a timed, re-recording of ‘the last xyz seconds’, to save when needed) – and it even takes Screenshots and more. However, sometimes this big fella has just ‘stopped working’ lately. No saving Screenshots, no Recording, no Error Message, Nothing; and I wasn’t sure why… After only a tiny bit of Troubleshooting, I quickly figured out how to at least ‘get it going again’ and I just wanted to share that here for you all, in a Quick Tip™.

To be honest [I always believe in being completely honest], I am still not sure why NVIDIA’s In-Game Overlay stopped working – but I did figure out how to simply get it working again – and here’s what I did:

  • Once I noticed the Overlay wasn’t taking Screenshots, I looked to see if the Overlay itself or more of the (many) NVIDIA utilities were still running, in the Task Manager. They were. [The In Game Overlay’s Executable is still called “NVIDIA Share.exe”, btw]
  • Thinking that something might have gone wrong with the Overlay utility, I opened up NVIDIA’s GeForce Experience.
  • In GFX [my accro.], I clicked on the ‘gear’ in the upper-right corner, “Settings”.
  • In the Settings area, I clicked on the switch/toggle for In-Game Overlay.
  • Although it took longer than normal, it eventually turned Off. Clicking it again, it turned back On.

That’s it! After those steps, the In-Game Overlay was working once again. Taking a Screenshot, for example, the notification from the Overlay came up, and the Screen was saved. It also started Recording again, without issue. Here is a ‘Tutorial Image’ of the steps to take:

Tutorial Image of what steps to take to ‘restart’ the NVIDIA In Game Overlay;
the recording utility built into the NVIDIA Drivers
(Click to see Full Size)

Although I do not have any details on why it failed, I still thought this short ‘tip’ would be helpful for people that might run into this (“shadowplay not recording” or “in-game overlay not taking screenshots”, etc) – so I wanted to share it here. HTH!

Update, 2018-03-26: Just a quick Update, that as of March 2018, I have run into somewhat of an extension of this issue, where GFX is no longer responding to this simple ‘toggle’ of the In-Game Overlay… Doing so (which used to temporarily ‘fix’ the issue above), now merely results in an ‘error’ message box, stating “That Didn’t Work. Try Restarting Your System.”, which although polite, is not very informative as to what caused the error or what else can be attempted to isolate/troubleshoot the issue further:

Doing some more research online, I see many others running into this issue, as well as its’ ‘extension’ here… However, there still is no absolute ‘fix’ for this problem yet [at least, none that is verifiable and repeatable, which I prefer to have as a qualification to my sharing it here as a “fix”] – therefore, I cannot say for certain what can be done to fix it, even though a wide range of things have somewhat worked for others (some early steps work, others must use further steps), such as:

  • Uninstalling/Reinstalling GeForce Experience
  • Installing an older version of GeForce Experience
  • Utilizing a third-party ‘drivers uninstaller’ to completely remove NVIDIA’s GPU Drivers and Reinstall NVIDIA’s GPU Drivers/GeForce Experience [AMD users can get a similar utility directly from AMD]
  • Reinstallation/Formatting of entire system (eg. Windows) and Reinstalling NVIDIA GPU Drivers and Reinstalling GeForce Experience

Once I find out what actually is a solid fix for this issue, I will state so here and post it in big, bold lettering [lol], along with a Tutorial Image (text on an example image of the solution, etc). Until then…

My Trip to New Delhi & Hyderabad

I am in New Delhi doing an assignment which requires me to do an organization capacity assessment of 5 research institutions in India to ascertain their capacity to receive research grants.

The journey was interesting as the flight I took had a group of tourists (religious pilgrimage to Buddhist sites in India) of whom a majority were first time flyers. So it was fascinating to see the excitement in their faces as the flight progressed; from the smallest kid to the old folk (Gray haired men and women who were in their late sixties) started to peer through the windows to steal a glimpse of the geographic features below. I instantly recalled my first flight (which I took to the UK) when I was just a teenager.

I had dreams of sleeping in the flight; however the rest of the passengers were too excited to be quiet. They were talking in loud voices and moving about so much that sleeping was not an option.

I arrived in New Delhi and managed to go through the immigration very fast and managed to get my luggage fast as well. However when I went out of the airport my pick up had not arrived; so after waiting for half an hour I took a prepaid taxi to the hotel. As a seasoned traveler to New Delhi, I advice all travelers to Delhi to take a prepaid taxi and always have the hotel name and address handy. Also have the telephone number of the hotel so that the taxi driver can call (they all have mobiles) the hotel and get directions if he does not know the place exactly. So without too much of looking around the driver found the hotel.

My past experiences with research organizations have been limited to engaging them for research in preparation for various assignments. I am looking forward to this assignment as this is the first time I will be doing work for research organizations.

WORKOUT ANYTIME in the Cincinnati Enquirer Community Press

WORKOUT ANYTIME in the Cincinnati Enquirer Community Press in an article titled, “Mercy Health’s new hospital could be economic boon to township.” The article focuses on the opening of the Mercy Health – West Hospital in Green Township and how that is creating an opportunity for businesses in the community including the new Cincinnati WORKOUT ANYTIME. The article begins with details about the new hospital, then goes into the economic development going on in the area. The article then details some of the businesses opening in the area, including Tony Petrocelli’s Cincinnati WORKOUT ANYTIME. The article includes this information provided by No Limit Agency: “Cincinnati resident Tony Petrocelli is opening the first Workout Anytime in Ohio near the hospital, in a space that was previously a WesBanco and had been vacant for six years.” The article ends with info on other businesses and plans for development in the area.  Click here for the entire article or begin below.

Mercy Health’s new hospital could be economic boon to township
By: Kurt Backschneider

GREEN TWP. — While township leaders are excited about the state-of-the-art medical services Mercy Health is bringing to the West Side, they’re also looking forward to economic development opportunities the new hospital will help attract.

Mercy Health – West Hospital, a 250-bed, full-service hospital off of North Bend Road near Interstate 74, will open for business Sunday, Nov. 10. 

Roughly five years in the making, the $240 million hospital will feature the latest advancements in patient care and comfort, new technologies, private patient rooms and expanded medical services for West Siders.

(Read More)

EUROPEAN STYLED DESIGN IDEAS BATHROOM

EUROPEAN STYLED DESIGN IDEAS BATHROOM

If you are looking for the best images of the sample of European-style bathroom designs, and applications of a modern sauna and gym. Here are sample images of European inspired bathroom design ideas for the home. European influence in a bathroom attached to the right furniture, cabinets bath faucets, vanities, and tile e. As well as their luxurious and spacious sauna Finish Head (European company based in Germany) in a corner, the rest of the spacious bathroom, as the essay should be dedicated to wellness and keep beautiful. Room with a bright red Finnish sauna focuses on physical fitness, also welcomed the formation of large area white cushions and fitness equipment attached to the wall. It makes sense that this is quite large, walk-in glass shower. If you have more time, is set beside a white bath has a sauna, in front of two large floor to ceiling windows.

The second room is here in a Finnish sauna takes gentler approach – offering a job to escape from their mental well-being of the outside world. solarium luxury, you can pull out in front of a soothing fire. Wide bubble bath, shower and steam bath in a wooden soaking dip to give you a variety of bathing options. You can easily live in the house of a modern European hits with a private bathroom attached.

EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM

Sample Dining Room Minimalist Design Idea

Sample Dining Room Minimalist DesignSample Dining Room Minimalist Design

Sample Dining Room Elegant DesignSample Dining Room Elegant Design

Sample Dining Room Classic DesignSample Dining Room Classic Design

Sample Dining Room DesignSample Dining Room Design
Sample Dining Room Elegant DesignSample Dining Room Elegant Design

It’s Not Just You™ – Fallout 4 Crashing with NVIDIA’s SHARE Game Recorder (Possibly Relating To The High Resolution Texture Pack) [Notification, Text-Only]

Updated 2017-06-19: I found one cause of the crashes with SHARE and Fallout 4 (for me) – The HRTP

Just a quick post to say that, if you are experiencing Fallout 4 CTDs (Crashes To Desktop, where FO4 closes without any messages or anything and you are left staring at your Desktop in Windows), I want to let you know It’s Not Just You™ – as I am finding I am experiencing this as well, lately…

I haven’t looked into Forums specifically for this, but perusing Forii off and on over the past year or so, where many are talking about Fallout 4 and Crashing, it seems to happen a lot to people anyway, for just about any reason, unfortunately. I myself wasn’t experiencing this very much though (gladly), until just recently when playing FO4 again [and spending way too much time building up Settlements instead of getting Quests done], I was testing out different Game Recording Programs and started seeing this happen.

I’m happily playing Fallout 4, getting frustrated at the Building mechanics or shooting some Raiders attacking my Settlement, when all of a sudden, BOOM – desktop image and icons. No message, nothing. Fallout 4 has closed itself instantly. I of course start it up again and begin to see where I last hit QuickSave or the game automatically Saved for me – but this has happened a few times in a row now where BOOM – the desktop greets me and icons appear. No message, nothing.

So, I tried to pay attention to what I was doing or what was running as Background Tasks – and the one thing I found, that when I changed it, the crashes stopped happening?.. I was recording with SHARE, NVIDIA’s new version of ShadowPlay, their game recorder that is included with their Graphics Driver. Interesting. I have up ’till now had no issues with SHARE, enjoyed testing it out, taking Screenshots with it and testing out the various Quality settings and forgetting about all of those tests and never writing about it. It seems to have great performance (very small performance ‘hit’/effect) and has a decent amount of options/features.

I then tried some other game recording programs I have purchased over the years, Playclaw, Bandicam, Mirillis’ ACTION, and none of them had any Crashing occur while I was using them (although Fallout 4 didn’t seem to like to start up with Bandicam running sometimes [but when I started the game first then Bandicam, it recorded fine]). Hmph. That’s too bad, I was liking SHARE. There could of course be a myriad of things that could be causing this (I have sometimes run into the game not starting up, with a black screen then shutting itself down again/closing, no matter what game recorder I am using – and again, there are people with high-end Intel CPUs and NVIDIA 1080’s with CTDs…); but for me, it seems to be SHARE, at this time. I might go and mention this in the Official NVIDIA Forum, if noone else has recently. Perhaps this is just a temporary issue in this game and their Drivers, in this version.

I am running NVIDIA GPU Driver Version 382.53 in Windows 10 64-bit, on a GTX 1060 3GB GPU, as of the date of this post.

I know this was a Text-Only post, but I took this screenie of the Driver
Version (so I would remember it) and didn’t want to waste it

I mention all of this because, I was not really experiencing any Crashes-To-Desktop with Fallout 4 prior to thinking of testing out SHARE for a while, just a bit ago. I am Level 42 in the game, after ‘starting out a second time’ and enjoying playing again, taking notes and screenshots for some future posts on it, while I slowly build and shoot my way through The Commonwealth… Where was I? Oh yeah, the crashes. It’s sad, but I want others to not feel alone (you’re not, really, go look up “Fallout 4 crash desktop”..). If you are experiencing Fallout 4 closing without any error messages recently, just letting you know – It’s Not Just You™…


Update 2017-06-19:
For my personal battle with this, I did some more testing and found that I was able to use NVIDIA’s SHARE to record with, for quite a long time (hours), when I disabled/uninstalled the High Resolution Texture Pack DLC…
I am not sure if this is the only related aspect to it (as CTDs happen for even GTX 1080 users and higher capability systems than mine and it happens to those not using the HRTP or SHARE at all), but for now, it seems that this issue may be directly related to that [for me] as it crashes far more often than without running the HRTP – and I have no crashes when recording with other Game Recorders and The High Resolution Texture Pack…

Is it that the HRTP is ‘too much’ for my little 1060 with only 3GB of VRAM and SHARE together? 
Is it related to how the game then uses more RAM (I have 16GB of RAM installed) with the HRTP and possibly a symptom of some RAM issues, perhaps?
I’m not sure of a solution yet, so I cannot say – but if you are experiencing this problem of ‘Crashing while recording Fallout 4 with SHARE’, try disabling the High Resolution Texture Pack for FO4 – it worked for me, just now. (Alternatively, use a different Game Recorder for the time being..). HTH

Proven Ways to Avoid Holiday Weight Gain

As we head into the holidays most Americans will gain between 8 and 12lbs between Halloween and New Year’s Day.  However, there are ways to avoid this weight gain!
Here are some key tips:
Eat before you drink and celebrate and before holiday parties.     Going into a holiday party on empty and hungry is a sure-fire way to overeat.    Alcohol intake boosts appetite to begin with and if you start out without anything in the tank it just gets worse!    This does not mean overeating – eat a sensible meal about 2 hours before you go to the party.
Try to choose higher protein foods first because protein helps with satiety (feeling satisfied and not hungry).
Fill up on Fiber Rich Foods – which also help with satiety and help create a feeling of fullness when consumed with water.  Focus on the raw veggies and yes you can dip them in some dip that has some fat because together fiber and fat can really assist in managing hunger along with protein.
Eat some fat – that’s right eat some fat!   Fats also are key for satiety.   That being said a little goes a long way!
Bring your own food to a party.   Rather than having only high calorie, high sugar and high fat foods bring something you enjoy that is also healthy along with you!
Eat slowly and chew your food thoroughly – seems simple and it is.    It is also VERY effective for limiting food intake!
Use smaller plates, bowls and glasses – all of which help to slow down food and beverage intake and make you more conscious of how much you are consuming!
Try to Minimize Sugar and Starch Intake – both sugar and starch wind up as glucose (blood sugar) and high intake drives insulin which results in rebound hunger.      High sugar and starch intake increases hunger – particularly when drinking alcohol because alcohol acts like a super sugar and also drives insulin response.
Pause before getting seconds – as with slower eating and deliberately chewing food this can give your body time to realize it is no longer really hungry.
If you are doing the entertaining have extra containers you are ready to give away so guests can leave with some of the extra food!

Try not to eat in front of the T.V. which distracts you from how you feel and results in mindless eating!
Consider planning a cheat meal but have a plan for how much you are going to eat!   One meal can knock you off course but most of the holiday weight gain comes from completely giving up on healthy eating for many meals.   Planning one cheat meal every week and planning on eating a set amount of the foods you may be craving can work for many people rather than mindlessly eating.      If you plan your meal including your portions of alcohol, sweets, fat and sugar you can limit the damage and still have a great time!
Drink Water.   Often quoted and still true – water is the best beverage and avoiding sugar laden drinks in favor of still or sparkling water can make a big difference in minimizing holiday weight gain.
Workout!   Working out improves mental outlook and burns some calories while reducing stress levels!    When we are stressed we overeat!   Just 10 minutes a day can make a big difference!

Get Your Sleep.   Lack of sleep is terrible for your health and particularly bad for driving appetite and overeating.   Lack of sleep causes hunger and excessive eating because the normal feedback mechanisms that tell you that you are full do not work properly when you are tired.   Basically, a tired brain tells you to eat to feel better and it is VERY hard to resist these urges when tired!

Teachers’ voices matter, and I want to hear from you!

Hi bloggy friends! I know it’s been forever since I’ve updated this blog, and trust me — lots of ideas are percolating in the hopper about my flipped(!) fourth grade classroom and other things I’ve tried this year. I promise those posts are coming! But in the meantime, I need your help!

As some of you may know, I’m working on my PhD in addition to teaching fourth grade full-time. The work-life balance has not been an easy thing, and now, I’m really working hard to finish as much coursework as possible in the short term because baby #2 will be arriving in November! (So while you all are hanging out by the pool having tasty margaritas, I’m crunching numbers for a stats class and reading about how to write ethnographic fieldnotes. Good times, I tell you…)

This summer, I’m starting to work on my dissertation, and I’m testing out my ideas in a pilot study. I’m planning to write my dissertation about the amazing elementary blogging community and the ways that teachers use blogs for professional development and personalized learning. I know that reading other teachers’ blogs has been hugely inspiring for me as a teacher, and I can’t imagine what I would do if I didn’t have access to so many great teaching minds across the globe. Shockingly, however, very little has been written about these great online communities and their benefits, and I want to explore that further. Scholars, politicians, and administrators need to know how much teachers learn from each other! Which is why I need your help.

I’m looking for a few teachers who would be willing to be interviewed about how they use blogs to support their work in the classroom. I want to talk to both bloggers and readers, so even if you don’t have a blog of your own, I’d still like to talk to you. This first wave of interviews will take place next week (June 20-26) and they will all be done online via Skype or Google Hangouts. I anticipate that each interview will last 45-60 minutes.

If you are willing to participate, could you please fill out this form so I can contact you directly? In exchange for your time, anyone who participates in an interview will receive up to $20 worth of free products from my TpT store.

Loading…
Once you fill out the form, I will be in touch to arrange a time that will work best for the interview. I need to conduct (and transcribe!) at least 3 interviews next week to fulfill the requirements of my current coursework, but don’t let that small number deter you — I will need many more interview participants once I move beyond my pilot study and begin work on my actual dissertation, so I’d love to have a list of possible interviewees already started. And my offer for the free products from my TpT store will still stand.

I hope that you will consider participating! I look forward to talking to you and learning from you.

Battlefield Hardline: A Double XP Boost is Currently Active! [Notification]

Just a quick post to notify those interested in Hardline that a Double XP Boost is Currently On! GOGOGO http://battlelog.battlefield.com/bfh/

See You In The Game!

3 Favorite & Underappreciated Apps

I recently stumbled on an adorable blog called “Thirsty Firsties,” and Kelly, the author, is hosting a linky party about iPad apps.

The rules are to share three apps – one free for classroom use, one paid for classroom use and one favorite app for personal use. She’s also giving away an iTunes gift card as part of the linky, so be sure to check out her blog and join in the fun!

I’ve already shared many of the apps that I love and use in the classroom. See, for example, my list of favorite paid apps and my list of favorite free apps. So today, I’m branching out to share some of the apps that I’ve used and enjoyed this year that I haven’t really talked about before.

Favorite Free App – Spelling City

Vocabulary Spelling City is a great app for teaching students vocabulary or spelling words. It has a variety of engaging games, and it can be used by students at all levels. The app itself is free and has a lot of functionality on its own. If you are a premium subscriber to Spelling City, however, it’s a great complement to the activities you assign your students each week. I had my students doing activities on this app almost daily, and our differentiated weekly spelling tests were done entirely through this app (with the teacher premium subscription).

Favorite Paid App – Marble Math

Marble Math is a fun and challenging math game that addresses a broad range of math computation skills. I’ll confess that I’ve even found myself playing it far longer than a typical “teacher test-drive” would require. The object is to navigate a marble through a maze by solving a variety of problems. It includes fractions, decimals, equations, and negative numbers, so this is probably best for grades 4 and higher. Of all of the apps on our iPads this year, this was the one that students seemed to gravitate toward most in their free time.

Favorite Personal App – Feedly

In the debate between Feedly and BlogLovin, I’m coming down on the side of Feedly for one major reason — I LOVE the iPad app. It’s really easy to flip through and navigate, it rotates, and it doesn’t seem to crash as much as BlogLovin did. In fact, I’ve never had a single problem with it. I don’t tend to comment on blogs as much from my iPad, so I can’t speak to that aspect of comparing the two. Usually if I’m browsing blogs on my iPad, I’ll mark the blogs that I want to comment on and comment through my computer later on. So for the sheer visual appeal of the app for reading blogs, I’m a big fan. This has become one of my favorite go-to apps on my iPad.

Now it’s your turn. What are your three favorite apps? I’d love to hear about them, and be sure to link up with Kelly over at Thirsty Firsties if you get a chance. She’s running the contest for the iTunes gift card through Monday.

And don’t forget to link up with my Teacher Toolbox Trio celebration as well! I can’t wait to discover more awesome classroom resources from TpT!

HOW TO DECOR A SMALL BATHROOMS

SMALL BATHROOMS DESIGN IDEAS

SMALL BATHROOMS DESIGN

Small bathrooms are a great challenge to use and decorate. Some bathrooms have the ability to feel bigger, while others may require small renovation projects to improve the square footage. Depending on your particular bathroom, the choices can be easy. Decide what your budget, then follow these design ideas for great little bathroom.

Vanity area: Your sink and how much space can be avoided, is crucial in the use of your bathroom. Determine your specific needs of their sink. If you are someone who has lots of toiletries, accessories and much need storage? Use a small vanity that has cabinet doors under the counter, and add shelves and drawers inside the cabinet organization. Do not have a lot of storage needs, but want it to look decorative? Consider using a pedestal sink, sink or under a decorative wall shelves. If you do not have room for one or the other, are also wells that fit the corner of two walls. This well has a record of 90 degrees and the heat sink is tucked away between the walls to give maximum space.

TOILET: Most people enjoy a lot of space around the toilet, although this is not always a realistic option for small bathrooms today. If you can get out of the toilet, come from a smaller size, occupying less space, and give more space around them. If you can not change the toilet, to minimize the elements of the floor, such as ladders, garbage cans, and a laundry hamper in the bathroom. The more space you can see and use, the better it feels.

Bath / shower: In most small bathrooms or you have a bathtub with shower inside, or you only have a shower. If your budget allows, losing the shower curtain and add a glass door cabinet. Glass will create the illusion of a large bathroom, and when you use the shower, it feels too. Consider using shower curtains or light a lighter color if you install a glass door is not an option. If you have high ceilings, installing shower curtain with a height over the head to extend the feeling of space.

LIGHT: Dark colors make the room feel smaller and lighter color makes the room feel larger. If you have the luxury of natural light to pour a bath, it feels much larger. Mimic natural feeling of neutral tones and sunny feel warm and inviting. Replace light bulbs and those which emit a warmer light. Incandescent lamps have an important role in how you see yourself in the mirror. I hate you to the bathroom, if you hate how you look in the mirror!

Even if your bathroom is small, you can still love his potential. Use these design ideas and love your new bathroom.

SMALL BATHROOMS DESIGN IDEAS

SMALL BATHROOMS DESIGN

SMALL BATHROOMS DESIGN IDEAS

SMALL BATHROOMS DESIGN IDEAS

Kaatsu aka Blood Flow Restriction Training

Kaatsu training was developed in Japan five decades ago.  Ka means “additional” and atsu means “pressure.” An English layman’s term for the practice is “blood flow restriction training,” and involves performing strength training exercises while restricting blood flow to the extremity being worked.

A significant benefit of the method is that you can use just 30 to 50 percent of the weight you’d normally use while still reaping maximum benefits of resistance training. You use less weight but do more — up to 20 or 30 repetitions versus 8 or 12 in most traditional strength training programs.
Cuffs or bands are used that are just tight enough to allow arterial blood flow but not venous flow. This causes lactic acid and other waste products to build up, giving you the same benefit as heavy lifting without the dangers associated with heavy weights. For this reason, it’s a great strategy for the elderly and those who are recuperating from an injury.

Scientists believe that restricting venous blood return can dramatically boost growth hormone secretion, reducing myostatin and inducing cell swelling.    Even better there is less overall tissue damage compared to traditional high intensity resistance training.

History of Blood Flow Restriction Training

The history of this type of training was detailed in an Outdoors Online Article (https://www.outsideonline.com/2023016/you-should-probably-try-japanese-blood-flow-routine):

“Kaatsu came about in 1966 when 18-year-old [Dr.] Yoshiaki Sato, now a doctor, noticed the intense ache in his calves after having assumed the traditional Japanese sitting position during a typically long Buddhist ceremony. It was an ache much like the one he experienced after lifting weights — an ache he realized had to do [with] the occultation of blood circulation.
Eureka! Using himself as a test subject, Sato spent the next several years perfecting a system of blood-flow moderation using bicycle tubes, ropes and straps. He later replaced the tubes with thin computer-controlled pneumatic bands. The idea was to apply pressure around the arms and legs while lifting a light load, safely impeding the flow of blood to exercising muscles.
Slowing this flow engorges the limbs with blood, expanding capillaries, engaging muscle fibers and raising lactic acid concentration. But — and here’s part of what makes Kaatsu unique — it fools the brain into thinking it’s being put through a vigorous workout.”

Kaatsu training can stimulate muscle growth and strength in about half the time, using about one-third of the weight, compared to regular resistance training.

How does Kaatsu Work?

The concept idea behind blood flow restriction training is to restrict blood flow in an exercising muscle/s using a band around the upper portion of the arm or leg being worked. This creates a metabolic disturbance that has local and systemic effects:

1. A reduction in the partial pressure of oxygen and increase in the acidity of the muscle tissue stimulates protein synthesis through an adaptive response to the stressor.

2. The central nervous system also senses the challenge and compensates by increasing sympathetic tone, heart rate, ventilation and sweating.   There is also an accentuated hormonal response as mentioned previously.

Kaatsu also stimulates mTOR signaling and lowers myostatin (myostation stops muscle growth!)
Unexpectedly muscle growth occurs both sides of the cuff even though blood flow is only restricted on the side farthest away from the heart.    The systemic increase in Growth Hormone also drives overall muscle growth.

How much Pressure?

It is important not to restrict blood flow too much, as this could lead to injury and fainting.
The good news is that research shows that if you use common sense the risk of using too much pressure is easy to minimize.  Your limb should not be tingling, turning red, blue or purple, and you should not lose feeling and should be able to feel your pulse in the limb.
For a great quick start guide to Kaatsu click here:  https://www.kaatsu-global.com/quick-start-guide-001/
Kaatsu Training Protocol

A typical training session uses three sets 0f 20 – 30 repetitions per set. use half or less of the weight you’d normally use. Rest between sets is short with typical rest time being 30 seconds.

Could Kaatsu Cause Injury such as Deep Vein Thrombosis?

Kaatsu is NOT the same as putting a tourniquet on and if you follow proper precautions is quite safe.    The key is that Kaatsu does NOT alter arterial blood flow as described previously.    It is important to use cuff’s designed specifically for this process.
Contraindications for Kaatsu

  • Women who have had a mastectomy with or without radiation and/or an axillary node dissection should not use blood flow restriction training.
  • People in hemodialysis who have arterial venous fistulas. Avoid doing blood flow restriction on the affected limb
  • Pregnant women should not use Kaatsu training.

WORKOUT ANYTIME in Albuquerque Business First

WORKOUT ANYTIME in Albuquerque Business First

WORKOUT ANYTIME VP of Development Randy Trotter was recently featured in the Albuquerque Business First. The article begins with information about WORKOUT ANYTIME and why Albuquerque is ripe for the concept to enter the market and grow. Randy is quoted about the franchise opportunity and they provide information about financing needed to open a location. The article goes on to touch on the real estate footprint. The article is ended by providing Randy’s cell phone number for anyone interested in a franchise.
You can view the full article here.
 

LUXURY GIRLS BEDROOM DESIGN DECOR STYLE GOOD

The design of a room can be a major problem in the redesign of your home. The problem could grow if you have to do for a child – a girl in particular. But do not worry, because we had some bedroom design ideas for the creative minds of the people working with the Italian girls.

LUXURY GIRLS BEDROOM DESIGN DECOR

LUXURY GIRLS BEDROOM DESIGN DECOR

They work in an atmosphere of classic charm in a contemporary way through a range of unique colors. Most models adopt a classic style, with good curves and cushions, and a pile of wood painted to create the perfect atmosphere for your little princess.

LUXURY GIRLS BEDROOM METAL DESIGN DECOR

LUXURY GIRLS BEDROOM METAL DESIGN DECOR

LUXURY GIRLS BEDROOM DESIGN IDEAS

LUXURY GIRLS BEDROOM DESIGN IDEAS

LUXURY GIRLS BEDROOM DESIGN CONCEPT

LUXURY GIRLS BEDROOM DESIGN CONCEPT

Original Mexican Mazel Mex

  • 2.5 cups cold water
  • 1.25 cups cornmeal
  • Generous dash cayenne pepper and/or cinnamon
  • 2-3 Tbs. corn oil
  • 3 onions, peeled and coarsely chopped
  • 8 large tomatoes, coarsely chopped
  • 1-2 fresh green or jalepeno chilis, peeled and coarsely chopped
  • 1-2 cloves garlic, peeled and minced
  • Diet Start
  • 1 Tbs. fresh cilantro, chopped and torn into leaves
  • 1 Tbs. fresh parsley, chopped

Combine water, cornmeal, and cayenne. Cook, stirring frequently, over medium heat for 5-8 minutes. Pat evenly onto bottom of 8″ x 12″ casserole.

Sauté onions in corn oil until translucent and fairly soft (10‑15 minutes). Add tomatoes, chilis, and garlic, and cook 2-3 minutes. Pour mixture over cornmeal base and bake in 350° oven for 20-25 minutes. To serve, sprinkle with cilantro and parsley.

YIELD: 2 servings.

Although taste is bitter if tomatoes are unpeeled, the peels are an important aid to digestion.

Hazel Enchiladas

  • 6-8 corn tortillas
  • 0.25 cup corn oil
  • 2 recipes Mazel Cheese Mexican
  • 1 recipe cooked Salsa Mazel
  • 1 recipe fresh Salsa Mazel

Dip corn tortillas in hot corn oil, then into cooked salsa. Fill with Mazel Cheese Mexican, and roll into enchiladas. Cover with cooked salsa. Bake at 350° for 15-20 minutes. Serve with fresh salsa.

VARIATION 1 Add I bunch fresh spinach, cooked and chopped, to Mazel Cheese Mexican.

VARIATION 2 Add 1 tablespoon fresh mixed chives and parsley to Mazel Cheese Mexican.

VARIATION 3 Use 1 recipe Mazel Cheese and 11/2-2 cups sour cream rather than 2 recipes Mazel Cheese.

YIELD: 2 servings.

Depending on size of tortillas and how you fill them, you may wind up with a bit of extra filling. If so, add it to the casserole or reserve it for another use. But better too much than too little.

Astaxanthin – Anti-Oxidant Superstar

While many antioxidants can be obtained by eating organic fruits and vegetables, astaxanthin is derived only from a specific microalgae called Haematococcus pluvialis.  The algae uses astaxanthin to protect itself from intense sunlight, ultraviolet radiation and low nutrition.

There are two natural astaxanthin sources: the microalgae that produce it and the salmon and krill which consume the algae directly. The best resources for these foods are wild-caught Alaskan Salmon and Krill Oil Supplement, which offer many other nutritional benefits.

Research indicates astaxanthin may benefit those suffering from inflammatory conditions including arthritis, rheumatoid disorders, metabolic disease, as well as cardiovascular, neurological and liver diseases.

Astaxanthin can also help to increase your muscle capacity and stamina, decrease workout recovery time, and decrease muscle pain.  Other proven benefits include:

Reduction of Inflammation
Protects Vision
Enhances Heart Health
Decreases Oxidative Stress
Protects Against Sunburn
Boost Your Immune System
Helps Prevent and Fight Cancer

Astaxanthin and Eye Health

Astaxanthin is an extremely powerful anti-oxidant:  65 times more powerful than vitamin C, 54 times more powerful than Beta-Carotene and 14 times more powerful than Vitamin E.
Astaxanthin crosses the blood-brain barrier AND the blood-retinal barrier which is a huge deal for your brain AND your eyes!

Astaxanthin is a member of the carotenoid family of anti-oxidants that include beta-carotene, lutein and zeaxanthin.   Of all the carotenoids, only zeaxanthin and lutein are found in the retinas of your eyes.  This is because your eye is a highly light and oxygen rich environment, and it needs a large amount of free radical scavengers to prevent damage. 
Scientists have specifically studied astaxanthin for its effects on the eyes and discovered that it is completely safe, and much more potent than all the other carotenoids.   Specifically it has been shown that astaxanthin supplementation can be effective in preventing a whole list of eye diseases including:

Age-Related Macular Degeneration
Diabetic Neuropathy
Cystoid Macular Edema
Central Retinal Arterial and Venous Occlusion
Glaucoma
Inflammatory Eye Diseases including retinitis, iritis, keratitis, and scleritis

Astaxanthin is one of the few anti-oxidants that you should consider supplementing because you cannot obtain the recommended dosage from your diet alone.      The good news is that there are excellent Astaxanthin Supplements available from companies like Jarrow, Doctors Best, and Swanson to name a few.   It should be taken with a meal with fat because it is fat soluble with dosage from 4mg – 12mg per day although there are no harmful effects from higher dosages.

First Impressions – Google Play App: “Screen Recorder” by Kimcy929 [App Mini-Review]

This article has been initially posted as Text-Only at this time, to speed up publishing, focusing on a certain issue. I will return to this posting and add more data on Quality and Performance, Screenshots and then eventually Share it on Twitter/Google+/etc… Soon™

[This past Christmas, my father gave me a neat little tablet to play on – Thanks, Dad! I have been enjoying the heck out of it, learning what it does (cough how to use a tablet cough), what applications it can run (I can write a Blog Post laying down!) and of course, what games I can play on it, heh. I hope to give some Tutorials/Walkthroughs and Reviews on Games and Apps from it sometime… Oh wait, here’s one now! haha]

The Google Store page for the app, with the ‘Play’ button removed [I felt it was a bit distracting, making people think there might be a ‘video to play’ here at The Blog], replaced with The Blog’s ‘G’ brevity logo version.
The Google Play logo in the upper-left will be used to denote images that come ‘directly’ from the Google Play website/page for the app for these types of App Reviews/Posts (Unedited other than logos or helpful arrows/etc added).

Google Play App – Screen Recorder by Kimcy929

Straight to it: while this app did in fact ‘record the screen’, it could not record the game sounds themselves (‘internal’ gameplay audio), it only recorded microphone sounds (‘external’ audio outside the device). While this is useful for some, especially Vloggers, I was personally looking for a screen recorder for my tablet that recorded gameplay and the audio from the game, for Tutorials, Walkthroughs, etc.**

Also, an issue arose where ANY video I viewed after installing this app (even videos I had on my device BEFORE installing it) only came up as a black screen, with the message:

“…Video Is Playing On External Display…”





Now, I had not enabled any such option, nor did I connect any External Displays…

I did some research online and found many people running into this issue with various apps and devices (tablets, phones, etc). Looking at the App configuration in the Settings of my tablet for Screen Recorder, I found this app giving itself the ability to ‘draw over other apps’ (which it can do to create on-screen writing, or arrows, which it advertises that it can do on the Google Play Store page for the app).

This is fine and these features are no doubt useful; however, I could no longer view any videos with the built-in Video Player (“complete action using > Video”) – I literally could no longer view any videos I had on my device, at all. [Even with third-party Media Players, such as VLC Media Player, simply viewing any videos was now ‘broken’…]

Video playing of the Video portion of Videos on the Video Player that
plays Videos was like, really broken now

Even after disabling this option that it gave itself without prior warning (found in Settings > Apps > ScreenRecorder > DrawOverOtherApps), all videos still came up with just a black screen and that message – that is, just Disabling the Setting did not ‘undo’ the inability to no longer watch videos in the Video Player. Disabling this setting, then Uninstalling this app, then Restarting the Tablet, fixed the issue [in my case, the only way it was fixed].

While this app does record the screen, allows for microphone use, doesn’t seem to affect gameplay performance very much, and seems to have a decent selection of Resolutions and Bitrates (eg. 1280×720, 8000kbps), also having some additional helpful things like drawing arrows on the screen, etc; it does not record ‘built-in’ gameplay audio – which I personally was looking for** – and it gave itself a power which interfered with normal tablet video viewing afterward… Not only that, but it only recorded a few videos before no longer working, with a message just repeatedly showing up stating, “Unfortunately, Screen Recorder has stopped”.

No changing of Settings (of my tablet or the app itself) was able to remedy this or get past it [the message coming up and no video being recorded]. Reinstalling the app made it work again, but after a few recordings, only that message repeating on the screen was the result, once again. Therefore, considering all of the above [but including the fact that the app must have worked for other people, that is, those not running into this ‘Screen Recorder has stopped’ message problem], this app earned Three Stars at Google Play from me, as of the time of this writing.

Being ‘completely free’ (No Fee and No Ads), and having a nice selection of ‘standards’ like Resolution and Bitrate choices, and having ‘extras’ like being able to draw on the screen; perhaps with some improvements to bugfixing, enhancements to how it handles itself (asking/warning what would happen before utilizing the “Draw Over Other Apps” ability would be helpful to users that might run into a problem with it) and adding the ability to record internal gameplay audio**, Screen Recorder could potentially be a very capable and ‘feature-rich’ screen recording application.

3/5 Stars
★★★☆☆


This app (and a shortened version of the above Review by The Blog (to fit on Google Play’s Review area)) can be found on Google Play, at:

Screen Recorder by Kimcy929
https://play.google.com/store/apps/details?id=com.kimcy929.screenrecorder

[Note: I am not affiliated with Screen Recorder or Kimcy929 in any way, and I have not and will not be compensated by them for writing about them here. I am merely a user of their application and like to help others with helpful information, when I can. The information in this post was obtained on an LG G Pad IV, and therefore might vary slightly from your own experience (Settings, Menus, Performance, Problems, etc) – but I hope that it was still found useful in some way.]

** More on this later… I have recently found out that Google has taken away the ability [temporarily?] to record game output AND game audio at the same time (“internal audio”) in the latest Android versions – save for a small number of possibilities on LG and Samsung devices. But, I’ll cover this at a later time, when I find out more solid details…

Reverse Lunge with Diagonal Lift

Lunges are a fantastic functional lower body exercise, and the benefits can be enhanced by adding an upper body component to the basic lunge movement pattern. One of the most productive total body lunge variations is the reverse lunge with a diagonal lift.
The exercise improves hip mobility in the front of the rear leg, while also increasing strength and stability in the front leg and increasing core strength and mobility. Specifically, it improves hip flexor mobility while training the body to move smoothly in the spiral line. It also encourages proper tri-planar movement.
Start standing with feet shoulder width apart in upright posture. Hold a medicine ball, dumbbell, or kettlebell (or even a body bar) positioned at the right hip pocket region. Step back with the right leg to perform a reverse lunge. At the same time move both arms diagonally up and back over the left shoulder until a comfortable stretch is felt in the anterior (front) of the right hip. Do NOT allow the back to arch. Pause in this position for one or two seconds.
Do 10 – 15 repetitions on one side then repeat on the other side. It is important that you keep both feet facing forward and keep your trunk upright throughout the movement.
Regressions:
Perform the movement without a medicine ball, dumbbell, or bar
Start in the split stance lunge position instead of having to step back
Progressions:
Increase weight you are holding.
Perform the movement in an alternating side manner vs one side at a time.
Video Links: https://www.youtube.com/watch?v=JDyGhcm-aVs

My Trip to Pakistan – Islamabad December 2011

This is my first trip to Pakistan after 9/11. The last time I was in Pakistan was in 2008, most of the contacts I had made during my last visits have not resulted in any business. However I was able to secure a training assignment which; believe it or not took 2 years to secure. It just goes to show how some clients work. The need for this training was identified over 2 years ago but due to financial and other ground realities they were not able to run the training course in Pakistan.



The travel plans were made and I set off to Pakistan on the 9th of December. The journey started well as I got upgraded to business class and had a pleasant journey to Karachi. I was scheduled to take a domestic flight from Karachi to Islamabad. Things started to go bad when I landed. I made my way to the check in counter to learn that the PIA (Pakistan International Airlines) flight to Islamabad was cancelled. They just did not bother to contact the agents or the passengers to inform them of the cancellation. The PIA ground staff were however polite and quickly arranged me to stay at the Airport Hotel and take the first flight out to Islamabad on the 10th morning. I had to call my client and the hotel in Islamabad to inform them of the changes to my itinerary. Hurrah to mobile roaming!


My perceptions of an Airport Hotel were based on the other airport hotels which I had stayed in (Dubai, Bangkok, Amsterdam); however the Airport Hotel in Karachi is another matter altogether. It is a real dump. I am not running down Pakistan or its people as I have stayed in very good hotels in Karachi and Lahore on my previous visits to Pakistan. This was a real house of horror. The rooms were dirty and smelly, the bathrooms were dirty and the dining hall was something else altogether. The table cloths were full of food stains and looked like they have never been bleached since the day they were made.


The management of this hotel needs major overhauling if it is to be an airport hotel. The staff of the hotel belongs in a farm looking after animals and not in a hotel serving weary travelers. They have no idea of how to handle guest in the hospitality industry.


I left the hotel early morning (on the 10th) and made my way to the airport to catch the flight to Islamabad. Things ran smoothly from then on and reached Islamabad on time. I was met by the Islamabad Hotel (http://www.islamabadhotel.com.pk/ ) representative at the airport and was taken to the car park to embark on the short drive to the Hotel. In the car park I saw this amazing site of a fork lift being used to move cars that had parked violating the parking rules.

I settled in at the hotel and met the client in the evening to prepare for the start of the training. The training on Institutional & Organizational Development will run for 5 days with 25 participants.


The first day of the training went well and the atmosphere in the training room was good and positive the client was very happy at the end of the day and was keen to keep the same momentum during then next 4 days.


The second day of the training also went along as planned and was well received by the participants. After the training I went to the shops (Jinnah Super Market) with one of the participants as my guide. Islamabad boasts of quite a few good shopping areas with some well stocked shops in clothing. The main thing that struck me is that you do not see poverty on every corner. Islamabad seems to have a majority of middleclass to upper class people living in the city. Quite a contrast to Karachi and Lahore where you do see poverty as it is common in other cities of South Asia.


The third day of training went smoothly without incident. After the training I met the managing director of a company which I met last when I was in Lahore in 2008. We were unable to build a working business relationship since we last met (9/11, war in Sri Lanka and the deterioration of the security in Pakistan which led to the Sri Lankan cricket team being attacked). We discussed the opportunities for joint collaboration and agreed to take the business relationship to the next level. Only time will tell is we are able to do this.


The fourth day of the training too went well and we will be going out for dinner with all the participants. We all made our way to Monal Restaurant located about 4000 feet above sea level (http://themonal.com/monal.htm ) at the top of the hill at Margalla Hills National Park for a night time view of the city of Islamabad.

I recommend to all who visit Islamabad to go for dinner at this restaurant, the view and the food was exceptional and so was the service. After dinner we went to Gelato Affair (www.gelatoaffair.com ) at the Gole Market to have dessert. The ice cream selection available was enormous and great tasting.


The last day of training went according to plan and was able to conclude the training program on time as planned. The participants were appreciative of the efforts of the trainer and received excellent feedback through the training evaluation. After the customary goodbyes and promises to keep in touch we concluded assignment.


The trip back to Colombo was on schedule; unlike while arriving at Islamabad the flight back to Karachi was on time and managed to arrive at Karachi without any hassle.

Quick Tip: Fallout 4 – TAB Key Stopped Working And Not Bringing Up The Pip-Boy? Here’s A Possible Fix [Text-Only]

I have been having a ton of fun playing Fallout 4 lately [again, building up my Settlements too much and ignoring the Main Storyline!] and ran into a ‘small-but-game-stopping‘ issue where the TAB key appeared to stop working. “Hitting TAB wasn’t bringing up the Pip-Boy anymore..??”

After doing some Troubleshooting and paying attention to what I was doing and pressing… it turned out to be a very simple issue – the TAB key was ‘locked’ out because of how I had used it in the Console.. Let me explain briefly:

I was playing around with SweetFX in ReShade off and on again, mainly to take Screenshots as I had lost a ton during a recent Hard Drive failure [as in thousands.. I know… but I don’t usually back up screenshots or recordings].
To open the Settings/Configuration for ReShade, the hotkey combination is SHIFT+F2.

Unfortunately, something in this combination of Fallout/ReShade/Windows ‘locks out’ the Shift Key after doing this with the Console open in FO4, and when hitting Tilde again to close the Console, this leaves TAB ‘disabled’ and it no longer brings up the Pip-Boy.

[This can also happen with the ENB series of utilities, which use SHIFT+ENTER to open and close the interface]

The Fix for this was simple, once I figured it out: hit Tilde again to open up the Command Console, then hit SHIFT once, then hit Tilde again to close the Command Console. That’s all there is to it!

Now the TAB key worked and I could bring up the all-important-and-totally-cool Pip-Boy once again! This is just a Quick Tip in Text-Mode only then; but I wanted to get it typed up and posted so that it could start to help out others that have run into this little problem [that seems to occur especially if running ReShade or ENB, in Fallout 4]. HTH

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

Matryoshka House was designed by architect David Jameson, is located in Bethesda, Maryland, USA. Obeyng unwritten rules concept Matryoshka, the house consists of a series of volumes is one inside the other. According to ‘description’, architects, in essence, a meditation room with suspended center acts as the physical and spiritual for the project. The internal energy market of the meditation room locked in an open, bright. Alternating tread stairs rise participant commits deliberatley eve of the meditation room. The meditation room is surrounded by a wooden container that surrounds the living area of ​​the house. Traditional decorations in turn should have soothed by stucco walls act as a protective layer and ground floor of the house. In-between space of nested volumes strategic cup sun to protect lines of light inside.

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY DINING ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

Trip to Hyderabad cont…….

Wow what an assignment! I must say that I have experienced similar assignments in the past in other sectors. However for this sector (development sector) it was a first. As a consultant you have to be on guard all the time when doing an Organization Capacity Assessment (Very similar to a “Due Diligence” in the private sector); if the client wants to mislead you, it can be done quite easily. In my case I was confronted with just that.

Things that should look out for are:

  1. Uniformity in questioners
  2. Having sets of files pre prepared for you (always ask for random files)
  3. When interviewing staff they have uniform answers or say very similar things (always ask to speak to random sample of staff and triangulate your findings; include speaking to other stakeholders as they will be a be useful source of information)
  4. Taking a long time to locate files and other documents when you request for them
  5. Key staff suddenly taking ill and not being available for interviews
  6. Acting “stupid” or not seem to understand what you are requesting for or saying

These things must be handled very diplomatically otherwise you will not be able to complete the assignment. Do not have a “knee jerk” reaction, observe very well and collect enough specific examples so that you have a basis for doubting what is presented to you. At the same time you must see if this deception is systematic or simply put up for this occasion.

If it is systemic you now have a real problem; you will not be able to decipher what is “genuine” and what is “false.” My recommendation is at this point you should seek clarifications from the person who hired you as well as speaking to the decision makers of your client. A temporary halt to the assessment will be in order to do this discretely. Suggest you take prudent steps based on your clients feedback.

However if you feel it is a put up for this particular assessment then your task is easier and it should be handled with the management of the organization that you are assessing. (Don’t forget you still need to advice your client regarding this unexpected turn of events) As this would be difficult situation for some consultants to handle; I suggest a cautious but a very direct approach. This will reduce the space for excuses by the staff. Since it will come as a surprise to them the staff of the organization you are assessing will also not be able to gang up on you to defend themselves. Make sure that you do not engage in a long dragged out discussion, be short and to the point. If handled properly it should bring about normalcy to the process.

If however you do not feel comfortable to take a direct approach you must then document both versions of the process i.e.

  1. The results that are shown by the staff of the organization
  2. Your observations and reservation of those results

This however will not be very useful in the end; as it will not provide the right results to take decisions the assessment was supposed to deliver in the first place. In some rare cases you may need to repeat the assessment to get the right results.

In my case it was the latter and I did confront the staff and the management regarding it. There was an attempt to defend the position but it was not successful; things returned to an acceptable level of normalcy and I was able to complete the assignment.

10 Reasons to Write with Technology

I’m super excited about the two books that I’m studying this summer as part of my summer series.

Today, I’m diving into the first one entitled When Writing with Technology Matters by Carol Bedard and Charles Fuhrken. 
Rather than giving you a laundry list of all of the ways that you could integrate technology into writing, this book goes in-depth into two specific projects. The first project uses reading and writing to launch moviemaking, and the second project is authoring a visual nonfiction essay. As someone who routinely integrates technology in the classroom, I like this book because it examines lots of angles of these types of projects in great detail. But this book is also good for beginners for that same reason. Rather than offering an overwhelming number of ideas, it breaks down projects into manageable and authentic steps. 
I’ll be examining each of those projects in future posts, but today I want to talk about the first chapter – 10 Reasons Why Writing with Technology Matters.

The opening chapter is filled with research about how technology integration contributes to student learning. They break it down into a list of the following 10 items:

Something that I would add to this list that captures many of the items is the notion of “authenticity.” When you engage students in project-based learning such as making a movie or designing a visual essay, students feel like they have a real purpose. Their work will be viewed by others, and this really motivates students to push a little bit harder. Giving students the freedom, space, and resources to work on something meaningful is a powerful recipe for empowering learners.

I also want to comment on teacher-disposition. A lot of people who visit my classroom think that I have all the answers for technology integration, but let me tell you a secret — I don’t. Almost every day, a student or teacher will ask me a question about how to do something, and I won’t immediately know the answer.

And that’s okay.

Because one of the most important things I can model for my students is the act of troubleshooting and problem solving. If I can’t figure out how to do something, I’ll hop on the internet and poke around until I can find the answer. I think a lot of teachers avoid technology because they’re not confident in their ability to work with it, but you can find a whole lot of information just-in-time as you need it online. Don’t let a lack of confidence divert you from trying some of these projects.

Next week, we’ll dive into Part 1: Reading and Writing to Launch Moviemaking. If you haven’t already picked up a copy of this book, I’d highly recommend it. And it’s not too late to join in the book study! In fact, you’re only 14 pages behind! 🙂

If you are reading this book, I’d love to know what you think. Leave me a note in the comment section!

Happy reading (and writing)!

This post contains affiliate links, but I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

INTERIOR DESIGN IN BANKE HOTEL

BANKE HOTEL

BANKE HOTEL ROOM DESIGNBANKE HOTEL ROOM DESIGN

BANKE HOTEL DESIGNBANKE HOTEL DESIGN

The Banke Hotel is recently installed in the Opera district in Paris-a first for the prestigious hotel chain Derby Hotels Collection. As its name hints at the Banke Hotel is the story of a metamorphosis. That of the body of a conventional bank Haussmann in a luxurious hotel of 94 rooms – which harmoniously blend the baroque style and design

Now on Instagram!

I’ve joined in the Instagram love! You can now find me at Eberopolis on Instagram.


I started using it on Wednesday, so I’m still new, but I’m making it a goal to post something (usually) classroom-related every day. Be sure to follow me so I can find all of my teacher-friends who are already there!

Have a great weekend!

Tune Into Technology Linky: Integrating Technology into Reading

I’m excited to be linking up with iTeach 1:1 and Learning to the Core for their new series Tune into Technology. This week’s topic is Integrating Technology into Reading, so I wanted to share 5 strategies I use to do this.

1. Let kids annotate their reading with GoodReader.



I’ve talked about this app before, but it’s one of my favorites. GoodReader allows you to annotate pdf documents. I use it for almost all of my professional reading, and I’ve converted several documents into pdfs for my students as well. It’s a fantastic tool because my students are able to leave “think marks” all over their reading, and I don’t have to worry about them writing in a book or leaving sticky notes everywhere. We’ve even developed our own codes for how to use the annotation tools.

2. Share favorite books on KidBlog.

My students LOVE sharing the books they’re reading on KidBlog, and they especially love reading and commenting on each other’s blogs. I’ve talked more about how we do this in a previous post.

3. Create Book Trailers in iMovie.

Some of my students began doing this for fun at the end of the school year when we became a 1:1 iPad classroom, and I will definitely be doing this more next year. iMovie has some great templates built-in for this, and my students loved being able to share their favorite books through this medium.

4. Create book clubs and discussion groups on Edmodo.

We started using Edmodo at the end of the school year, and it was a great way to get conversations started or keep them going about the books we were reading in class. You can read more about getting started with Edmodo in my paperless series here.

5. Use Evernote and GoodReader to assess reading.



I use the running record templates from the Reading & Writing Project at Teacher’s College. Because they’re pdf files, I can annotate them in GoodReader, and I can record students while they’re reading in Evernote. I’ve written a complete tutorial on how to do this here.

How do you integrate technology into reading instruction in your classroom? I’d love to hear your ideas. And be sure to link up with the Tune into Technology linky!

And don’t forget to join us for the Southeastern Blogger Meet Up. Click the button below to get the details and RSVP!

Multi-Protocol Label Switching (MPLS) continue…

Adding a Label

MPLS is a method that takes the best of both worlds and creates a concept that allows IP packets to travel through the network as if IP were a connection-oriented protocol (which it isn’t). Using special routers called Label Switching Routers (LSRs) does this. These routers connect a traditional IP network to an MPLS network. A packet enters the MPLS network through an ingress LSR, which attaches a label to the packet, and exits the MPLS switched network through an egress LSR. The ingress LSR is the router that performs the necessary processing to determine the path a packet will need to take through the switched network. This can be done using traditional routing protocols such as OSPF. The path is identified by the label that the ingress router attaches to the packet. As you can see, the ingress router must perform the traditional role that a router fills. It must perform a lookup in the routing table and decide to which network the packet needs to be sent for eventual delivery to the host computer.

Internet 2010

However, as the packet passes through the switched network, it is only necessary for the switch to take a quick look at the label to make a decision on which port to output the packet. A table called the Label Information Base (LIB) is used in a manner similar to a routing table to determine the correct port based on the packet’s label information. The switch doesn’t perform IP header processing, looking at the IP address, the TTL value, and so on. It just spends a small amount of time doing a lookup of the label in the table and outputting the packet on the correct port.

When the packet reaches the egress LSR, the label is removed by the router, and then the IP packet is processed in the normal manner by traditional routers on the destination network.

If this sounds like a simple concept, that’s because it is. MPLS still is in the development stages, so you’ll find that different vendors implement it in different ways. Several Internet draft documents attempt to create a standard for MPLS. Other features, such as Quality of Service (QoS) and traffic management techniques, are being developed to make MPLS a long-term solution.

Using Frame Relay and ATM with MPLS

One of the best features about the current design of MPLS is that it separates the label-switching concept from the underlying technology. That is, you don’t have to build special switches that are meant for just MPLS networks. MPLS doesn’t care what the underlying transport is. It is concerned only with setting up a path and reducing the amount of processing a packet takes as it travels through the circuit.

Because of this, it’s a simple matter for an ATM or Frame Relay switch vendor to reprogram or upgrade its product line to use MPLS. For ATM switches, the VPI (virtual path identifier) and VCI (virtual channel identifier) fields in the ATM cell are used for the Label field. In Frame Relay switches, an extra field is added to the IP header to store the label. However, don’t get confused and think that an MPLS network is an ATM network or a Frame Relay network. These switches must be reprogrammed to understand the label concept. It’s even possible, for example, for an ATM switch to switch both ATM and MPLS traffic at the same time. By allowing for the continued use of existing equipment (and

these switches are not inexpensive items), large ISPs or network providers can leverage their current investment, while preparing to install newer MPLS equipment when the standards evolve to a stage that makes it a good investment.

For the long term it’s most likely that MPLS will be implemented using technology similar to Frame Relay instead of ATM. This is because of the small cell size of the ATM cell (53 bytes) combined with a high overhead (the 5-byte cell header). In a small network with little traffic, this 5-byte cell header seems insignificant. However, when you scale this to large bandwidth network pipes, this amount of overhead consumes a large amount of bandwidth given the small amount of data carried in the 53- byte cell. Thus, variable-length frames are most likely to become the basis for MPLS networks in the next few years.

BEAUTIFUL INTERIORS STYLE FROM SHH

SHH is a London-based company, founded in 1992. Interior design is not their only strong point that the company also makes architectural projects. But now we want to show you how a room can be transformed into an elegant and modern in their vision.

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

We collected up to 15 different interiors that stand out and can become a real source of inspiration. We deal in the living room, bedroom or the hallway of boredom and failed surprising elements are added to create comfortable spaces. White is airy and gives a sense of calm, while the funky food the best and rebels. Color and light is present in some unusual arrangements with excellent results.

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS STYLE FROM SHH

BEAUTIFUL INTERIORS STYLE FROM SHH

BEAUTIFUL INTERIORS DESIGN FROM SHH

BEAUTIFUL INTERIORS DESIGN FROM SHH

It’s Not Just You ™ – Heroes Of The Storm ‘Screen Shake’ = ‘Motion Sickness’ (Dizzy, Nausea, Headache) [Notification]

Just a quick post to let others know that – if you are experiencing this phenomenon – getting dizzy or even nauseous while playing Heroes Of The Storm lately: It’s Not Just You™… I even whipped up an Example of the effect, for those that aren’t quite noticing it:

Example of ‘the screen shake effect’ I made, in GIF format
(Click to see slightly larger Full Size)

I first came across this in the Official Heroes Of The Storm Forums at Battle.Net. It was originally posted by “Phoenix” a couple of weeks ago, here. Although I have seen it personally in-game (noticed it), I have not suffered the nauseating effects that many may/do suffer with this Special Effect the game offers – even though I have experienced ‘game motion sickness’ from other games. [I did notice when testing and creating the above Example, that it made me slightly queasy however..]. Mainly, I have ‘been lucky’ with not experiencing it because I do not normally play the Heroes that have/produce this effect (the ‘screen shake’ effect). Here is a list of all the Heroes and Spells that can produce this effect, thanks to a helpful post by “Hatsoz” on the Official Forums:


Spells with Screen Shake
Zagara – Nydus Network (R)
Genji – Swift Strike (E)
Sgt. Hammer – Concussive Blast (W), Blunt Force Gun (R), Napalm Strike (R)
Gazlowe – Deth Lazor (W)
Lucio – Soundwave (Q), Sound Barrier (R)
Valeera – Blade Flurry (W)
Zul’jin – Twin Cleave (W), Guillotine (R)
Ragnaros – Sulfuras Smash (R)
Alarak – Lightning Surge (E)
Cho – Upheaval (R)
Karazhim – Radiant Dash (Q) (Only with Volley of Blows Talent Lv. 16), Seven-Sided Strike (R)
Anub’arak – Burrow Charge (E) (Upon resurface)
Li Li – Water Dragon (R)
Diablo – Shadow Charge (Q), Fire Stomp (W), Overpower (E)
E.T.C. – Face Melt (W), Stage Dive (R) (Landing only)
Falstad – Hinterland Blast (R)
Kerrigan – Impaling Blades (W)
Muradin – Thunder Clap (W), Dwarf Toss (E), Haymaker (R)
Sonya – Ancient Spear (Q) (On Hit), Leap (R)
Stitches – Slam (W)
Tyrael – El’druin’s Might (Q) (On sword landing), Angelic Flash (Q) (Teleport to sword), Judgment (R)
Uther – Hammer of Justic (E), Divine Storm (R)





Heroes with No Screen Shake
Valla
Tyrande
Lunara
Kael’thas
Zeratul
Cassia
Probius
Varian
Samuro
Zarya
Auriel
Gul’dan
Medivh
Chromie
Tracer
Dehaka
Xul
Li-Ming
Greymane
Gall
Artanis
Lt. Morales
Rexxar
Leoric
The Butcher
Johanna
Sylvanas
The Lost Vikings
Thrall
Jaina
Azmodan
Chen
Rehgar
Murky
Brightwing
Tychus
Abathur
Arthas
Illidan
Malfurion
Nazeebo
Nova
Raynor
Tassadar

I experimented with every single Graphic Setting available in the game (eventually running it on the Lowest Possible Settings) and could not find a Setting that disabled this effect…. I first tried Physics, then other effects-affecting settings, such as Shader level, and more, until everything was at the lowest possible Settings and still the effect appears in-game.

I even looked through the game directories (folders) for some sort of editable configuration file, but the only ones present were ‘protected’ by Blizzard, by being compressed or encrypted in their own proprietary encapsulation of some sort (which renders the files not easily readable or editable by normal means – this is understandable, as they do not want their game easily ‘hacked’ or negatively affected by end users).

So, for now – unfortunately – there is no solution for this, for sufferers of this effect. The only recourse, until Blizzard puts in an option to Disable Screen Shake, is to avoid the Heroes that produce this visual effect.



Just letting Sufferers know: It’s Not Just You™!
[I will try to remember to return to this Post and Update it once Blizzard adds this option – or a workaround is found]

1960 Lincoln Continental mk 5 Formal Limousine

in the above photo, lower left side, you can see the air conditioning vent under the grab bar

and this cool control panel / radio for the passengers in the back seat to control the partition, radio, and air conditioning level

and the AC takes up about a 1/3rd of the trunk space

The Best Text for Teaching How to Write and Revise Leads

My fourth graders hate revision. They’re often offended by the mere suggestion that they hadn’t nailed the perfect lead to their stories in their first draft.

I’m used to this. I see it every year in writer’s workshop, especially at the beginning of the year when we’re writing in a genre for the first time.

And every time I see this, I become more determined to break them of this thinking.

Today, we were working on the Common Core State Standard W.4.3a – Orient the reader by establishing a situation and introducing a narrator and/or characters; organize an event sequence that unfolds naturally.

My favorite story to use for this is standard — especially with fourth graders — is The Teacher’s Funeral by Richard Peck.

This book, set in a small Indiana town with a one-room schoolhouse, has the best opening line of a children’s book ever.

If your teacher has to die, August isn’t a bad time of year for it. 

Richard Peck keeps it going from there, building an incredible introduction. You can read the entire first chapter here.

Today, I started our writing lesson by reading this chapter to them. I have the Kindle edition of the book, so when I read it, I can project it on our ActivBoard so the students can follow along as I read. They laughed throughout the intro and were immediately hooked, begging me to choose this as our next chapter book read-aloud. Score one for the objective of “hooking your readers!”

I then asked them how many of them thought that introduction was the one that was in the first draft of his book.

One or two hands went up.

Richard Peck shared in an article called “In the Beginning” (Horn Book Magazine, September 2006, pp. 505-508) that it normally takes him 24 drafts of his lead before he’s happy with it. TWENTY-FOUR!

And here I’m asking my students to take a second pass at their writing.

I shared that little nugget with my students before we reread the first chapter. As we read if for a second time, we focused on the characteristics of his writing that made it such a great lead.

Here’s what my students noticed, compiled into an anchor chart:

Once we finished the chart, I had them go back to a piece of writing they’ve been working on and try to write a different introduction. Some students tried changing the point of view, others jumped into the action or started with dialogue. Whatever the strategy, all of them managed to produce a new version of their introduction, and all were at least a little better than what they’d started with.

We’ll get this revising thing down eventually…

What are some of your favorite books to use to teach students how to hook their readers? I’d love to hear about them in the comments!

ever worry about what happens to your car when you drop it off at the dealership? Worry no more. Leave your cell phone in the car, with the camera on, or put in a Go Pro, or dash cam

Seriously, last week some customer did this at the dealership I work at, he wanted to bust the guys who detail the inside of the cars

http://tywkiwdbi.blogspot.com/

My trip to Wadduwa

I just returned home after a 3 day South Asian Regional Workshop on Resource Mobilization. It was a good workshop as it took RM strategies to the next level and looked at operationalizing them. As Strategic Planning / Organization Development consultants we often highlight the strategy for resource mobilization; be it venture capital, angel fund or gearing in the private sector to institutional fund raising and linking with CSR in the development sector.

What was most interesting was the cases we went through, and going through a logical process which led to ones resource mobilization strategy. The workshop was facilitated by a retired general from the Indian army and he was a good facilitator who kept the attention of a group of 50 people for 3 days. It is important that we as consultants keep up with new trends as well as take time out to reflect on our ability to continually add value to our clients by increasing our body of knowledge.

We also learned of new ideas and trends in the field of resource mobilization and were very useful given the current global economic situation. Looking forward to taking the learning’s to my clients in the near future.

I also got a very small project in the financial services industry while I was at the workshop. It is from an old client who has the habit of not giving me too much lead time for projects: there goes my week end. So I am going straight to facilitating a strategy workshop in the financial industry over the weekend.

WORKOUT ANYTIME in the Daily News

WORKOUT ANYTIME in the Daily News

Dale Chaffin of WORKOUT ANYTIME Bowling Green was recently featured in the Daily News. Dale was interviewed for the story and a photographer was assigned to take his photo for a story about the WORKOUT ANYTIME location in Bowling Green where he is the GM and how he has lost 80 pounds since 2012 with help of personal trainer Chris Talley. The story focused on how working at a gym has helped Dale with his fitness goals. 
View the full article here. 

The “Basic Seven” Foods

1. Green and yellow leafy vegetables. These may be used either cooked or raw, fresh or frozen. They include cabbage, lettuce, broccoli, sprouts, asparagus, spinach, celery, and similar greens. These provide vitamin A to protect eyes and skin and to guard against infection. They also provide iron for the blood and roughage for elimination.

2. Fruits—at least two each day. One may be an orange or some other citrus fruit. Another may be a banana, tomato, apple, pear, peach, a bunch of grapes, or some tropical fruit. For variety use strawberries, canteloupe, or some type of melon. These fruits provide vitamin C, which is essential for strong blood vessels and healthy gums and teeth. They also provide roughage for better elimination. Fresh fruits are best for these purposes. Heat destroys vitamin C.

3. Potatoes and other vegetables. Two or more servings should be eaten each day. These include Irish potatoes, sweet potatoes, yams, beets, carrots, parsnips, lentils, onions, peas, beans, soybeans, and many more. Vitamins and minerals are present in all vegetables. Potatoes are a good source, especially when cooked in their skins. Vegetables may be used in various ways. Raw carrots are an excellent source of vitamin A. Vegetables provide bulk, which aids digestion.

Diet Start

4. Milk and dairy products. The very minimum for an adult should be a pint a day, or more, and a quart a day for each growing child or pregnant mother. Nursing mothers need even more. The milk may be in fluid form, as whole milk, buttermilk, skim milk, canned or evaporated milk, condensed milk, dried milk, or some form of cheese. One ounce of cheddar cheese is equal to a cup of milk. The milk can be used as a beverage or in cooking, such as soups, puddings, and desserts. Milk is a fine source of protein. It also provides minerals, vitamins, and especially calcium, which is needed for bones, teeth, nerves, and muscles.

5. Protein foods. Foods that are rich in proteins include beans, peas, soybeans, nuts, peanuts, eggs, meat, or fish. Soybeans are the richest source of proteins known. They are far richer than eggs, liver, kidney, or any other meat products and far less expensive. They have been used in the Orient for many generations. Dried peas, beans, lentils, and peanuts are all similar to meat in food value.

6. Whole-grain breads and cereals, at least two or three slices of bread and one dish of cooked cereal each day. These are particularly valuable for growing children and adults who work hard. Whole grains include wheat, rice, barley, corn, and other grains. “Enriched white flour” is better than ordinary white flour, but it is still lacking in certain essential elements. Grains and cereals provide calories for energy, as well as vitamins, minerals, and roughage. Whole grains, freshly ground, are best.

7. Butter, cream, fortified margarine, or other vegetable fats. A certain amount of fat is essential in every diet. Salad oils, olive oil, corn oil, and similar products may be substituted to meet the daily requirements for fat in the diet. Fats provide calories for heat and energy. They yield more than twice as much energy as carbohydrates.

Other foods rich in fats are egg yolk, vegetable oils, olives, nuts, and soybeans.

These are the “basic seven” food groups. One or two from each group should be included in the diet of the whole family every day. The quantities need not be large. The wider the variety, the better. Serve each food attractively. Eye appeal is always important.

In considering the “basic seven,” you will notice that there is no mention of white sugar, spices, or condiments. None of these is essential in the diet. Ordinary white sugar does provide energy, but that is all. There are no vitamins or minerals in refined sugar.

In addition to these “basic seven” food groups one should include at least six to eight glasses of water each day. Water is necessary for removing wastes from the body. It aids in maintaining a normal temperature and in moistening the air we breathe. We do get some water from our foods, but not nearly enough to supply all our needs. Many who complain of sluggishness, fatigue, and nervous headaches would feel better if they were taking more water. It is best to drink between meals. Drinking water should be pure and free from harmful germs. If in doubt, boil the water before using it.

Over two thirds of the human body is composed of water in some form or other. This means that a person weighing 150 pounds has more than one hundred pounds of water in his physical make-up. Even the bones are one-third water. Without sufficient water, the blood cannot circulate properly. Nor can the digestive organs work as they should. All the cells need water. This is the remarkable fluid in which myriads of chemical and electrical reactions are taking place all the time.

A reliable supply of pure water is essential to the life and health of every family. One may live quite a while without food, but not more than a few days without water. There is no substitute for water. It is indeed the liquid of life. Those who follow the “basic seven” in their choice of foods and include a generous supply of pure water need never fear. They will be taking a balanced diet, and they will feel the benefits of good health all their lives.

The Question of Alcohol in you Diet

Alcohol, like caffeine and nicotine, is a drug. As such, it is capable of bringing about serious damage to mind and body when taken over a long period of time. Made from the fermentation of carbohydrates with yeast enzymes, alcohol is rapidly absorbed through the digestive system, affecting coordination of the muscles, nerves, and vision. It also stimulates stomach secretions, inhibits mobilization of lymphocytes so that the body’s ability to fight infection is reduced, and causes sludging in the red blood cells, thereby reducing oxygen to the heart and lungs. And it affects the brain, adversely affecting the specific centers that govern self- control, judgment, and personal inhibitions.

Alcohol is a depressant. The transient feeling of well-being that goes with a couple of glasses of whisky or a dry martini—the “lift”—is followed by a series of miseries to which your body is subjected, not the least of which, for a woman, is the effect drinking alcohol has on the liver. And the insidious thing about the detrimental effects which alcohol has on health and beauty is that they occur even to the average social drinker, not just to the serious drinker and the alcoholic.

A joint study by Dr. Charles S. Leiber of the Section of Liver Disease and Nutrition at Bronx Veterans Administration and Dr. Emanuel Rubin of the Department of Pathology at Mount Sinai School of Medicine showed that too much social drinking can cause serious damage to the liver, even though the drinker may feel fine, act normally under the influence of alcohol, and not be an alcoholic. Leiber and Rubim took a group of healthy nonalcoholic volunteers and put them on a carefully controlled eight-day drinking regimen. Then they tested the subjects’ livers to see what changes, if any, the alcohol had caused. The amount given to a particular group was considered equivalent to the average intake of a business executive-7 ounces of 86-proof whisky per day for the first four days, 11 ounces for the new two, and then 14 ounces for the last two. The results were surprising: there was an increase in the fat levels in the subjects’ liver of from five to thirteen times, all in only eight days, and in spite of the fact that the diet of the subjects had been supplemented with vitamins.

Diet Start

Similar studies have turned up similar results. Researchers have also found that liver-cell damage and the increase in fat in the liver can be reversible if the drinker abstains from alcohol for long enough. But longterm damage to the liver resulting from daily consumption of alcohol over the years can be irreversible. Persistent drinking can also be a precursor not only to specific diseases of the liver such as cirrhosis, but also to other toxic conditions in the body.

Next to the skin, your liver is your body’s largest organ. In many ways it is also the most important. One could, for instance, live without a stomach if necessary but never without a liver. It is the body’s chemical purifier, performing more than five hundred different functions, many concerned with detoxifying the system from all the drugs, pollutants, and poisons you take in every day, including alcohol. If the liver is overworked or worn out by excess alcohol consumption, eventually and unavoidably your whole body suffers. Biochemists used to believe that excess alcohol was no more damaging to the liver than too much sugar or too much fat in the diet; that the real damage to the liver came only from malnutrition. But these theories have been disproved. Both the quantity of alcohol you drink and the duration of time over which you drink it are important factors in determining liver damage.

Because the liver is responsible either directly or indirectly for controlling levels of many hormones in a woman’s body (particularly estrogen), when liver damage occurs as the result of a diet too high in fats or of drug taking or long-term alcoholic consumption, the endocrine balance can be severely upset, leading not only to disruption of the menstrual cycle but also indirectly to feelings of depression, anxiety, and chronic fatigue.

These troubles may have another cause, also related to alcohol. In order to metabolize alcohol, your body calls on its reserve of many B- complex vitamins which act as coenzymes in the process. When one eats foods containing natural concentrations of carbohydrates or sugar, such as grains and fruits, the B-complex vitamins necessary for their proper digestion and assimilation are provided by nature in the foods themselves. But the B-complex vitamins have been discarded in the processing of highly refined sugars and alcohol. So the body’s own reserves can easily get depleted when you drink alcohol and eat refined sugars. Results of this depletion are many, the most common of which can be fatigue, a craving for more alcohol or sweets, or diverse emotional complaints from severe premenstrual tension to simple feelings of chronic misery.

These are just some of the reasons why the Lifestyle Diet excludes alcohol in quantities of more than a glass of wine a day. This may seem like a tremendous sacrifice to you if you are used to taking a great deal more, but once you eliminate stimulants such as coffee, tea, and alcohol from your life and begin to experience the enormous sense of well-being that comes with the low fat, low protein, complex carbohydrate diet (and all the other important things that also go with discovering and expressing your potentials mentally and physically, such as deep relaxation and exercise), you will never miss it.

Currently June (?!)

Oh, how I love to start the month with Farley’s Currently over at Oh’ Boy Fourth Gradeespecially when I actually remember that it’s the start of the month and don’t have that revelation about a week in. 🙂

Here we go…

Listening:  I got to see Sara Bareilles perform at a small Atlanta venue on my birthday a couple of weeks ago, and wow – can she ever sing! She’s been in heavy rotation on my playlist ever since.

Loving: The first couple of weeks of summer vacation are always the best because it feels like there’s so much free time ahead. A quick glance at my calendar would remind me that this summer is going to fly by very quickly, but for now, I’m thrilled to have a little breathing room before the hustle and bustle of another school year kicks in.

Thinking: Math is on my mind a lot right now. I’m finishing up my final project for my math endorsement (an algebra unit), and I’m joining multiple book studies about math-related books this summer. My students did very well overall on the year-end standardized tests, but I feel like I’m still scrambling to make sense of the best way to teach the Common Core. I need to figure out something that will allow me to differentiate more without creating oodles of additional work on my end. If anyone has the magic solution, please let me know.

Wanting: We bought a new desktop computer last year, and it was intended to be mostly for my school/blogging/TpT use. That worked for a little while, but my husband has slowly taken it over and claimed it as his. He’s been working crazy hours (he’s an attorney), and his work is often more deadline-oriented than mine, so I’ve given in. But now that I’m getting ready to start my doctorate, it might be time for us to give up on the idea of sharing a computer. I have a work laptop that I use sometimes, but it’s got some crazy restrictions/configurations that limit the programs I can install, etc. For most people, it’s not a big deal, but when you’re a tech-geek like me, it’s frustrating. So last week, I made a big pitch for me to get a new iMac desktop, and he agreed! There were some intense negotiations that went into the process, but in the end, we made a deal that we can both live with. I’m going to be responsible for generating the extra income to make the payments on it (we got it financed over 18 months), but between some tutoring jobs I’m taking and TeachersPayTeachers, I think I’ll be able to swing it.

Now I just need to hold on for Monday when my precious new toy will arrive!

Needing: I need to get organized and prioritize what I need to accomplish this summer because there’s no world in which I’ll have time to tackle my ever-growing to-do list. I need to create some realistic goals with deadlines to keep myself reasonably on-task. I also need to cut out distractions like randomly checking Facebook or email or Twitter every 10 minutes.

3 Vacay Essentials – 1) Shade – I have the misfortune of being allergic to almost every type of sunscreen that exists — including the ones that say they’re hypoallergenic and made for sensitive skin. Put some of that sauce on me and stick me in the sun, and my body breaks out in a terrible, lobster-like swollen rash that is WAY worse than any sunburn I’ve ever had. So I stick to the shade as much as I can, and I visit my dermatologist every year to make sure that I’m not getting skin cancer. Not fun, I tell you.

2) Books – This used to be a huge ordeal before the advent of the Kindle. I like having lots of summer reading options, ya know?

3) Beverages – Hydration is important! And there’s a whole slew of summer drinks that I could put on the list… But seriously, I’ve been drinking at least 64 oz of water each day of this vacation before I even touch anything else, so I think I’m doing well.

Big thanks to Farley for continuing to host this linky. Every month I find so many amazing blogs and learn lots about my fellow bloggers. If you aren’t participating already, you should definitely link up!

,
Have a great June, everyone!

My Free Font, Just For You™: LED SCREEN GTAMBLOG CAPS+ 2.0 (with Download Links)

An awkward name perhaps, for an odd little, simple version of an “LED Screen / Scoreboard Style Capitals Only” font (including Punctuation and Accents!) – but years ago, I contacted the author of a similar-styled font, to ask specifically for Commercial Use of his font, that looked somewhat like this one [I have been using it “Officially” here at The Blog since then – you can see Examples of it all over this site, on the images].

Today, I found Fontstruct, an easy-to-use, free, online Font creation utility – and thought “why don’t I make my own version this font, not only for ‘The Blog’ to use, but for others to possibly use as well?”.
And so, here is an ‘LED Screen’ or ‘Dot Matrix’ style font (also usable as a ‘Pixel font’) – with punctuation and a couple of ‘accents’ – but capitals only, as traditional LED Screens or Scoreboards (“Score Screens”) would have used; made by my hand, Just For You™…

I am distributing it as “LED SCREEN GTAMBLOG CAPS+ 2.0” by ‘Troy from The Game Tips And More Blog’, at various Font sites, such as those below (for Downloading, Updates as I add more and/or am approved by them). [If you prefer, contact me via email and I can also send you the TTF or Zip of the Font, from me, directly]:

  • Fontstruct (where I created the font by hand): 
  • https://fontstruct.com/fontstructions/show/1459839/led-screen-gtamblog-caps-2-0

  • Fontspace: 
  • http://www.fontspace.com/thegametipsandmoreblog/led-screen-gtamblog-caps-20

Feel free to Comment on those sites, or here (Suggestions, Questions, And More) or contact me via e-mail if you have any questions about the font, at:
[email protected]

Usage License: (Creative Commons, Attribution License, 4.0)
You are free to utilize this font for ANY purpose whatsoever, including Commercial Use and Monetization of any kind, Royalty-Free; the only condition being that you mention my name somewhere, anywhere, during use of this font.
If you would like to make a Donation, on behalf of using this font, you may do so via PayPal, using my email ([email protected]), but this is not required at all, to use this font for any purpose you desire.

As some of you may know, I have been playing around with Fonts off and on, creating them for various images/headers/etc here at The Blog over the years, compiling at least 4-5 fonts or so from scratch, with varying levels of completion… I ‘m not sure when I’ll get around to finishing all of them – but for now, I hope this font can perhaps be useful for some quick images, videos, or whatever you may want it for – Enjoy!

Edit:
 I may return and add some images and examples of the font… Soon™
Also, although I have made this font by hand at the Fontstruct website, I always suggest that you Scan any files you download (just in case), with an Anti-Virus utility of some sort – whether it is Windows Defender (built-in to Windows 10, after downloading) or via an online scanner/website, such as VirusTotal.com or similar.

The Ten Steps of Body Clock Diet

The ten steps of the Body Clock Prescription that follow don’t take much time or many resources but they go a long way toward helping you stay healthy if you are well or feel better if you are ill.

  1. Follow the Body Clock Diet. Put protein in your morning meal, snacks and lunch, either by drinking the Rhythmic Shake or by emphasizing high protein foods. Move most of your carbohydrates from breakfast, lunch and morning snacks to the evening.
  2. If you scored high on the insulin resistance test, adhere as rigorously as you can to the Body Clock Diet. Because insulin resistance is at the root of so many conditions, you want to capitalize on your ability to bring down your serum insulin level. Eat the maximum tolerable amount of your protein during the day and save as many of your carbohydrates as possible for one meal in the evening. Craving carbohydrates is your enemy in this regard; you will probably need to make a gradual transition to the level of strictness that I’m recommending. That way, your insulin levels will come down step by step; they will not be screaming for carbohydrates while I’m screaming at you not to eat them.
  3. Excess alcohol and caffeine interfere with circadian rhythm. The definition of excess depends on the person and on the time of day. In the early evening, the effects of alcohol are minimized by most people’s capacity to easily metabolize two to four ounces of liquor over a two- to four-hour period. But efficient alcohol metabolism declines dramatically after 10:00 p.m., making late night drinking particularly disruptive. Avoid caffeine except at around 4:00 p.m., the one time of day when its circadian effects are neutral.
  4. Stay away from diet drinks because they send a false signal to your body. They promise the potential arrival of sugar and then, after engaging your body’s mechanism for raising insulin, let you down when the sugar doesn’t arrive.
  5. Get plenty of full spectrum sunlight in your eyes and on some part of your skin every day. When you expose your eyes to sunlight — and I hope it’s obvious that I don’t mean staring at the sun — do it without wearing spectacles. These days spectacles of all kinds block both the healthy and the injurious types of ultraviolet rays. So get out in the sun, take off your glasses and soak up a moderate amount of sunlight — at least one-half hour near dawn or dusk — every day. This does not require sunbathing, simply being out in the sun. If you live in a northern latitude where the winter days are short and there are lots of rainy, snowy or cloudy days, then consider getting a light box like those prescribed for people with seasonal affective disorder. Expose yourself to the light box for at least a couple of hours every day.
  6. Establish a regular time for going to bed at night and getting up in the morning and get sufficient sleep every night, preferably during the natural period of darkness between sundown and sunrise. While you’re asleep, expose yourself to light as little as possible. If you wake up in the middle of the night to pee, don’t turn on the light. Instead, use a dim flashlight or nightlight to light your way to the bathroom. Even a tiny amount of light at night will squash your melatonin peak. Remember that melatonin is an antioxidant and informational substance whose narrowly timed peak in the middle of the night, following a healthy exposure to light during the day, may be suppressed by ill-timed light. Failure to have a peak release of melatonin at night is like missing a bus that comes only once a day.
  7. Encourage rhythmic harmony by learning to breathe with your diaphragm. When you relinquish control to your diaphragm, your breathing will take on the normal rhythm directed by the unconscious part of your brain rather than the potentially asynchronous rhythm generated by your chest muscles. This works especially well when you engage in stressful activities that make you unconsciously hold your breath. For example, when I am on top of a ladder trying to hammer in a nail that is slightly out of reach and I dislodge the nail, bang my thumb or bend the nail, I stop and say to myself, ‘Baker, stop holding your breath and take a deep one with your diaphragm.’ Then the nail goes right in. The same is true for threading a needle, looking for lost keys, worrying about finding a restroom when you’re downtown with a filling bladder, waiting in line at the bank or driving on the freeway.
  8. Engage in some form of rhythmic exercise at the same time every day, preferably in the afternoon when muscle strength is at its peak and most people perform best. If you can walk, walk. If you can swim, do that, especially if you can find nonchlorinated water to swim in and are strong enough to swim with a good steady rhythm. If you prefer, ride a bike. But whatever you do, remember to breathe in a relaxed way, using your diaphragm, so that the effort of your exercise reinforces rhythmic harmony in your body instead of allowing unnatural chest breathing to interfere with it.
  9. Working out to music takes exercise one step farther by permitting you to synchronize your activity with the beat of the music. Of course, the ultimate refinement of exercising to music is dance. If you are ill and unable to move about, then simply listen to music, but really listen so that the music penetrates your being rather than simply acting as a background to whatever you are doing. Some types of music are more healing than others. I asked Millie Grenough, a music therapist and author of Sing It! Learn English Through Song, what would be the best choice of music for a person with inflammatory illness.3 She said, ‘It can be anything from Mozart and Vivaldi to favorite Broadway tunes, from long-remembered lullabies or Tibetan chants to your favorite song when you were sixteen. The main thing is that it be music the person loves.’
  10. Meditate daily to reinforce and integrate your body’s rhythms. And if you’re ill, use meditation as the platform from which you launch the powerful tool of visualization. When you dance, you put your whole body’s movement into the embrace of something bigger than yourself — the music. When you are fully the captive of the music, you are free to receive its blessing. And every step of the dance is a choice you make to stay with the music.

SWIMMING POOL DESIGN IDEAS GERRR……

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

Here are some tips on how to keep your energy bill is lower and save valuable resources of the Earth at the same time.

* Heating your swimming pool: Depending on where you live and heat that is during the spring months and summer, you may not need to heat your pool as often as you think. The houses are in hot desert climates and do not need to heat the pool at night or when he decided to entertain. By heating the water, taking into account alternative methods of heating used to heat water. Energy from solar panels on your home is an excellent way to harness the sun’s energy to heat your pool.

* Cleaning the Pool: Many use automated equipment, which operate in the pool when the pool is empty. While helping to keep the pool clean when you’re in, but also the use of electricity 24 hours a day. Try to reduce the frequency to an automatic cleaning to be used. Also choose to use less chlorine, and to consider alternatives such as cleaners, detergents, ozone. Keep the cover over the pool when not in use also helps keep the debris in the air cleaner, leaves and twigs.

* Keep all plastic and vinyl toys away from the game: Even if I do not believe that the maintenance of the environment around the pool with pool toys the child is also important. Many pool toys are made of vinyl or PVC, also known as polyvinyl chloride. These types of toys, release toxins and chemicals hazardous off-gas. Try to select the pool toys that are made from natural organic materials and the safety of your children, and help keep the pool a greener place to play in.

* Use other sources of water in your pool: In your geographic area, using other methods to collect water in your home into account. Options could include rainwater that can be used to fill your pool, and the plumbing in your home for showers, baths, basin and toilet. This measure can help you reduce your water bill and conserve water on Earth. For many municipalities, geographic, you can earn additional benefits by LEED, or the benefits of saving tax on income tax time. Greywater reuse for your home is a viable option for many homeowners.

Owning a pool should be an enjoyable experience, after all, you deserve to relax and entertain in the warmer months of the year. Despite owning a pool should not be at the expense of its portfolio, the precious resources of the Earth or the health of your family. Follow these tips to green the pool and enjoy all the benefits of reading and resting in the sun.

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

Are You Ready for NaNoWriMo?

I plan to encourage my students to participate in NaNoWriMo again this year. For those of you who aren’t familiar, November is National Novel Writing Month, or NaNoWriMo for short. It’s the month where tell your inner-editor to hush so you can just let the ideas flow on to the page. It’s about getting something done without worrying how perfect it is, because you can always go back and revise in December.

Last year, as October drew to a close, I introduced NaNoWriMo to my class. I explained the premise, and gave them the option of taking on the challenge. We talked about word count goals and commitment to writing outside of the classroom. Then the fun started. Student after student signed up, each cheering each other on as they dedicated themselves to writing a book. In the end, I think all but two students decided to participate. We had weekly lunch meetings where students could eat and share their writing with friends, and although not all students met their goals, they definitely started to find their voices as authors.

The Young Writers Program for NaNoWriMo has some great teaching materials to get your students psyched for NaNoWriMo and to teach them about narrative writing in general. You can check out their website at http://ywp.nanowrimo.org/. In addition, there’s still time to order a NaNoWriMo classroom kit which comes with a student goal setting poster, NaNoWriMo stickers to track progress toward a goal, and buttons for those students who participate or finish. The classroom kit is free (and awesome), but they request a $10 donation for the materials — a small price to pay to get your students excited about writing.

In honor of NaNoWriMo, I’ll be hosting a month-long link-up that will start on November 1 and run the duration of NaNoWriMo. Whether your class officially participates in NaNoWriMo or not, I hope you’ll join me in sharing the great writing work that’s happening in your class. Grab the button, spread the word, and meet me back here on November 1st for a writing extravaganza!

In the meantime, check out the Educators’ section of the Young Writers Project. I’m sure you’ll find plenty to get you (and your students) excited for a month full of creative writing!

Who’s in?

MODERN SWEDISH BEDROOM DESIGNS GO SROP

Although they are all unique, and I noticed that some of the same elements that deserve to be underlined. First of all, all the bedrooms the images below, with large windows, which are usually thin stylish blinds or curtains. On both sides of a king-size bed is a traditional bedside tables, shelves or chairs for the original. The walls are painted mostly white, but here and there, you will find an interesting color interference: some of the rooms are nice backgrounds to illuminate the room. Details of lighting are particularly interesting to observe. Please take a look at this beautiful gallery bedroom and tell us what information you will find interesting.

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

‘Setting Of The Month’: Bandicam’s Xvid Implementation (with Screenshots and Quality Analysis)

As the First Post of a new type of article here at The Game Tips And More Blog
[started due to popular demand!], I would like to explain a bit about my ‘Setting Of The Month’:
What is meant by “Of The Month” (at least at this blog), is less ‘lunar syzygy’ and more ‘what is currently being served’, in concept. Every once in a while I will post what Recording Settings or Rendering Settings I am currently using. I want to begin doing these posts in response to two things:

  • It was requested by you readers! Over the first half of the year, I run a Poll here at the Blog (it is located on the top right panel area) and currently, the single most popular Requested Topic For Future Posts is “Tips and Tricks of Video Capturing and Editing”. Therefore, as part of answering that call ‘by popular demand’, by my respected readers, I want to share as a ‘Tip’ what settings I have been using of late to capture – not to tell you ‘what to use’, but to simply give everyone a suggestion – perhaps even a place to start from, when recording or editing their gameplay adventures.
  • I see ‘settings’ asked about a lot, everywhere. Whether it is in game forums, technical forums, video editing and recording application forums, or even in my Inbox once in a while, people are constantly asking what settings to use, or “what settings do you use” – and that’s great! I’m glad to see helpful replies of others (and sometimes short explanations on how someone is using a specific setting and why). As anyone who has asked me directly knows, I enjoy helping others with suggestions on settings and usually try to explain why I am using one setting over another.
And so, here is the first edition of a new addition to this blog, without further adieu:

 

This Month’s Featured Setting

Bandicam’s Xvid Codec

For the past little while, I have been messing with the Xvid codec – not the ‘official’ one from XviD.org that you have to download – the one that is built-in to Bandicam, easily available via pull-down menu in the Format area, where you choose which codec you want to record with. As of the most recent version of Bandicam [at the time of this post], Xvid is now the Default Codec that is pre-selected, when you install/startup Bandicam. Where in previous versions, a ‘Bandisoft-optimized’ MPEG-1 codec was the Default, now a ‘Bandisoft-optimized’ version of Xvid is thrust into the limelight – and I wanted to test this puppy out and see what tricks it can do!

If you’ve were computing through the 1990’s, you may have heard about the Xvid codec. A competitor to the DivX codec around the turn of the millennium, I am actually going to skip over the history of the Xvid codec [other than this one paragraph]. Parts of such history may actually be a ‘dark affair’ (depending on who you talk to), worthy of it’s own short documentary, as the DivX vs XviD history has some aspects in common to the history of other products and companies that were popular over time [with Saturday Night Television Specials such as “Apple vs Microsoft”, “Xerox vs Apple” and more..]. As with many companies and products in popular use today, they all have “Origin Stories” that you won’t find on The Internet and never will… And Now, Back To Your Regularly Scheduled Program

The Xvid codec is a version of MPEG-4 (it is MPEG-4 Part 2 or “H.263/ASP”), so it is directly related to it’s younger-but-bigger brother, AVC (which is MPEG-4 Part 10 or “H.264/AVC”). As such, Xvid [ASP] does not have many of the functions that are found in H.264 [AVC], such as Deblocking, where the codec will try to ‘hide’ some compression artifacts that occur due to over-compression; but Xvid is still a great codec to record with, it’s main strength being speed. Because it doesn’t have many of the processing functions of it’s more recent and bulkier MPEG-4 versions, it can ‘figure out a frame and save it to a file’ very quickly – which is essentially what is happening, technically, when game recording.

Recording with Bandicam’s Default settings for their implementation of Xvid [designated herein as “Xvid(b)”**, to show that it is the “Bandicam-Optimized Version of Xvid”] will give you a Quality Setting of 80%. The capturing framerate, by Default, is set at 30 fps (Frames-Per-Second). The audio format, in this Default setting, is compressed “MPEG-1 Layer 2” format (MP2) for the Audio. Here is a screenshot showing what all of Bandicam’s Default settings, for their implementation of Xvid, looks like in one image:

The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Default Settings)
Click to see Full Size

Below, are a sampling of a handful of games and the framerate performance hits that were seen while recording with these Default Xvid(b) settings (i.e. the differences between ‘playing the game and not recording’ versus ‘playing the game and recording at the same time’):
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }

Recorded Game Title                     Resolution      Performance Hit (Δ)
Hitman: Absolution Benchmark 1366×768 ~ 2 fps
Hitman: Absolution Benchmark 2560×1440 ~ 4 fps
FurMark (Full Run) 1366×768 ~ 2 fps
FurMark (Full Run) 2560×1440 ~ 0 fps
Unigine Valley Benchmark 1366×768 ~ 6 fps
Unigine Valley Benchmark 2560×1440
Batman: Arkham City Benchmark 1366×768 ~ 4 fps
Batman: Arkham City Benchmark 2560×1440 ~ 9 fps
Skyrim (Introduction) 1366×768 ~ 0-8 fps
Skyrim (Introduction) 2560×1440
Minecraft 1366×768 ~ 0 fps
Minecraft 2560×1440 ~ 0 fps

table code created by Danny Sanchez (journalistopia.com)

As you can see in the table above, the difference in framerate between ‘Playing’ and ‘Playing While Recording’ is very minimal [the performance ‘drain’ being accentuated in higher resolutions for most games]. Although only a handful of games were tested, I did try testing both spectra of resolutions possibly in use by the average gamer today, by recording with an ‘enthusiast’ resolution (2K/1440p) as well as a commonly-run laptop/notebook resolution (1366×768) which could also be run by older or less-capable systems. Bandicam’s optimized Xvid performs very well in the tests, with almost as low of a performance change as the ‘super-light-performance-hitting’ MJPEG codec.

Like MJPEG however, Xvid’s weakness is the lack of tools to compensate for compression. Again, I mention here the MPEG-4/AVC ability to somewhat ‘hide’ compression artifacts, with code for utilities such as “Deblocking” built into the codec, where the edges of areas that the codec is making its calculations in are ‘softened’, so that the ‘blocky’ effect of high compression (called Macroblocking) is less visible. In Xvid, there is no such utility, so if too high a compression level is attempted [too low a bitrate is stipulated], then these ‘block’ artifacts can easily be seen, especially in ‘flatter’ areas of a frame (portions of the screen with less color and/or changes happening), as seen in the below frames, extractions from the actual recorded video frames themselves:

[In the examples below, when the compression artifacts aren’t as obvious, I will show the entire screenshot in compressed JPG format, then underneath I ‘zoom in’ to show the compression artifacts from the codec as magnified extractions from the original video frames, in BMP (BitMaP) format. I use sampled areas for that, as full 1440p Screenshots in an uncompressed format would be over 10MB each]

Xvid(b)** at 90% Quality [altered from Default 80% Quality Setting], Battlefield 3.
Click to see Full Size
The result when recording at 90% Quality (up from the Default of 80%) was very satisfactory, with only ‘nit-pickable’ parts to show the codec’s weaknesses, like the Upper Left area of this scene above (with the dark interior areas). Some artifacting can also be seen in the Middle Top area (slightly obvious even in this compressed JPG), where the plain sky areas take the brunt of the compression of this frame taken from the original game recording video produced by Bandicam.

Xvid(b)** at Bandicam’s Default of 80% Quality, Battlefield 3.
Click to see Full Size
The above image is taken from a game recording of Battlefield 3 that had some pistol action going on, with an explosion caught in the background. The quality of Bandicam’s Default setting isn’t too bad and high action scenes can actually look quite acceptable. For example, in this frame above, with the explosion occurring on an upper walkway, only the Right Edge of the explosion (with the debris) has obvious Macroblocking – and the sidewalk [and foliage] macroblocks had to be ‘looked for’ here – and are less noticeable in the moving video. The ‘flatter area’ (with less colour variations) in this scene, is the poster advertisement, which the codec punishes with compression, leaving colour banding and macroblocks evident. The rest of scene is more complicated material and demands the codec to utilize more bitrate, ending up looking not too bad at all, when VBR is used (Variable BitRate, “changing data rate”) mode).

[I personally found that in dark (as in nighttime) scenes, at 80% Quality there was distracting colour quantization (colour quality loss) and macroblocks (little square compression artifacts); but for most material, the 80% Quality setting seems ok to use for Xvid(b)**, most of the time]

Xvid(b)** at Bandicam’s Default setting for Xvid of 80% Quality, the Batman: Arkham City Benchmark.
Click to see Full Size
The above image is an extracted frame from a recording of the Batman: Arkham City Benchmark. A very difficult scene for any codec (unless you tell it to ‘keep all quality, use 100%’ and then don’t mind the larger file size that will be created) it is hard for a codec to decide what to compress and what not to, as particles fly all over the place and light and dark areas shift around as the Benchmark runs through this area with changing levels/regions of Luma [lightness, brightness]. Bandicam’s Xvid did a good job trying to keep the text sharp at 1440p – but at 80% Quality, macroblocks are everywhere (those present in the screenshot above are not from the JPG compression, they were present in the game recording itself). At 80% Quality, anything with subtle gradient colour changes are absolutely tortured by the codec, seen especially in the change from light to dark in the Center Top light fixture area and the Left Lower curtain region. Bright areas however, such as the light fixtures themselves and almost all of the particles flying around, are judged by the codec to be ‘important to human eyes’ and detail is kept high for those objects.

Xvid(b)** at Bandicam’s Default setting of 80% Quality, Minecraft.
Click to see Full Size
The above frame is taken from a recording of the Minecraft Demo starting shoreline, originally captured at 1440p (the image is resized down to 1280×720). I was interested in how Xvid would handle Minecraft, a difficult game to capture and compress, as hard edges and lines are everywhere. Bandicam’s version of Xvid did surprisingly well, as the video recording itself is a joy to watch, with compression artifacts barely noticeable (recording at higher resolutions helps with that, but uses more disk space for the game recordings). Magnification of the original video frame is just below (next image):

These two sampled regions are magnified to 200% (doubled in size). They were extracted from the game recording frame above, which itself came from the original game recording produced by Bandicam and the built-in Xvid codec.
Click to see Full Size
While not as obvious in the moving video, the above frame extractions (both Left and Right sides) show Gibbs Effects [‘ringing’ or ‘mosquito noise’] around the hard edges of Minecraft’s graphics. The colour gradient changes, blending slowly into the background/sky colour in the Right Half of the above image also cause Ringing and Macroblocks to occur. Distant water gets treated with extreme prejudice by the codec, as the jumble of lines and animation from the textures are ‘sluffed together’ [my technical term] and Macroblocks are obvious. Again, these artifacts are more obvious in the stills from the game recording – the video itself, when watched, was more appealing to the eye and these compression artifacts aren’t as noticed as the frames fly by and the cow looks at you in a wondering manner.

Regardless of some of Xvid’s compression shortcomings illustrated above, with the speed that it performs at, along with the ability to turn up the Quality setting in Bandicam, these artifacts shown will not occur as often in higher quality settings – and then Xvid can be a nice codec to run with, especially if a system cannot handle a codec that does higher processing on the frames [taking more time to do calculations on them and saving them to a file, creating ‘lag’]. Older systems or laptops that do not have the hardware to utilize GPU-accelerated game recording (with codecs such as NVIDIA’s CUDA and NVENC, AMD’s App Acceleration and Intel’s Quick Sync) can utilize Xvid as a less-taxing codec to record with [as another option on the Utility Belt of Game Recording Codecs to choose from]. Indeed, it is almost as speed efficient as the ever-compatible MJPEG codec, for capturing, editing and compression.

The default setting, when installing Bandicam, creates a GOP of 150 [GOP stands for Group Of Pictures or the number of frames between Information/Key Frames in a video]. This is fine for normal viewing (and it leaves a lot of headroom for compressing ‘only the differences’ between the frames, resulting in smaller filesizes), but a large GOP can create problems with editing, as many NLE’s (Non-Linear Editors, such as Sony’s Vegas/MovieStudio line, Adobe’s Premiere products, Lightworks and more) do not work well with so many frames in-between the Keyframes – however, editors such as Corel’s VideoStudio, CyberLink’s PowerDirector and Microsoft’s own Movie Maker do not exhibit this issue [I tested these three applications by hand, myself, just to make sure and they imported fine and were handled without the “glitchy-ness” or “trails” that were exhibited in (for example) Vegas].

Although originally captured for an article on the Xvid codec here (which can potentially also experience the issue mentioned in the above paragraph) this image shows an example of what the “trails” or “glitchy-ness” will look like, as it was captured from a video with a Large GOP (large keyframe interval) output produced by Vegas. (Click to see Full Size)

When editing a video with a large GOP, the video editing application must ‘seek’ to the next Keyframe whenever it has to process a request and calculate/build all of the frames from there (which slows things down and delays processing and editing). Also, depending on the application, with some programs video can only be ‘cut’ on keyframes (unless an application is coded to create keyframes where needed). All of these steps and problems created by ‘Long-GOP’ video can be avoided [when using the above-mentioned video editing programs] by simply adjusting the Keyframe Interval in the Xvid settings to “1”.

One caveat to keep in mind, with setting a Keyframe Interval of “1”: although it will now make for speedy/easier/morecompatible editing with many video editing applications, the codec will not have as much ‘headroom’ to work with, when compressing your game recording material. 
What this means is, that instead of only keeping track of the changes between frames (say, a person running by down the side of the screen), where the codec will literally only save those ‘differences’ in the file; it now has to save every single portion of the viewable screen in every single frame, complete and independent in ‘stand-alone’ frames (the KeyFrames), and while the video will be much faster in seeking and have increased editing compatibility, the codec requires much more bitrate now, to save ‘everything’ in every single frame.
The result: your video file size will end up larger than before. However, you can now edit the video in Vegas, Premiere, Lightworks and more… the choice of how to go about this aspect then, is up to you [whether to use a GOP of 1 for easier editing, or not]. If you do not use these specific video editing programs (perhaps instead, you are using PowerDirector or VideoStudio Pro or Movie Maker, which to not have as much trouble with ‘Long-GOP’ material, not needing the GOP to be one frame) or you are not having problems with whatever editor you are currently using, there is no need to make this change to the Xvid recording settings in Bandicam [this is why there is no green indicator arrow in my ‘Suggested Settings’ illustration coming up in a little while, for this option]
Staying on the topic of Bitrate [from the above paragraph] for a moment, “..what kind of file sizes are we looking at..?”, you might ask. Well, here is a sampling of some of the Bitrates that were seen when recording with Xvid(b)** at Bandicam’s Default Settings for the codec:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }
Recorded Game Title                    Resolution     BitRate (Mbps, GBph) 
Hitman: Absolution Benchmark 1366×768 ~ 34 Mbps, 0.97GB/hour
Hitman: Absolution Benchmark 2560×1440 ~ 83 Mbps, 2.4GB/hour
FurMark (Full Run) 1366×768 ~ 44 Mbps, 1.2GB/hour
FurMark (Full Run) 2560×1440 ~ 45 Mbps, 1.2GB/hour
Unigine Valley Benchmark 1366×768 ~ 37 Mbps, 1.06GB/hour
Unigine Valley Benchmark 2560×1440
Batman: Arkham City Benchmark 1366×768 ~ 20 Mbps, 0.57GB/hour
Batman: Arkham City Benchmark 2560×1440 ~ 54 Mbps, 1.5GB/hour
table code created by Danny Sanchez (journalistopia.com)
Just to compare some file sizes of other codecs: the Low Quality setting for the Dxtory codec (with Compression) recorded a run of the Unigine Valley Benchmark (at 1080p) at about 326Mbps (9.3GB/hour), while FRAPS produced a recording of about 291Mbps (8.3GB/hour), with Lagarith (in Default/RGB Mode) creating a recording of the same material that ran at about 235Mbps (6.7GB/hour). Of course, bitrates fluctuate, depending on the complexity of the material (more movement/action/etc, which requires more bitrate to properly represent the material.. but a longer explanation of that is outside the scope of this post [believe it or not…I’m trying to keep them ‘short’! hah]).
The other setting that can be changed in the Bandicam interface for their version of the Xvid codec, is the Quality. Here is an example of the differences in quality output at the various Quality settings for Bandicam’s Xvid:
Comparison between varying Quality settings, for Bandicam’s version of Xvid (from Left to Right; Quality at 40%, 60%, 80% and 100% Quality). The JPG compression used for this composite [the four videos side-by-side] did not overly affect the Macroblocking occurring – the ‘blockyness’ seen in these frames is almost untouched, even though the videos from the original Unigine Valley Benchmark recordings were converted into this JPEG image – this is very close to how it looked in the video (although slightly more noticeable as still images). Click to see Full Size
As you can see, the perceived quality for Xvid goes down quickly, with Macroblocks becoming more obvious as the quality setting goes down. However, acceptable Quality can be maintained if the quality setting is kept high [in my opinion, stay at 90% or higher if you can]. Remember though, that with the higher quality settings, more space will be required by the codec, to save all of that data. Also, if using a Keyframe Interval of “1” (creating a GOP size of one frame, each frame in the video then being a Keyframe), the codec will also not have as much room to compress the images/video and your output size will increase. As stated above though, the benefit of using a Keyframe Interval of “1” is, then your game recordings will be easily importable/editable in NLEs like Premiere, Vegas, Lightworks, etc – if you are are having troubles with those specific applications [if you are not, there is no need to limit the GOP to one frame, which is why there is no green arrow indicator in the below illustration]. Below, are my Suggested Settings then, for this codec in Bandicam, in one image:
The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Suggested Settings):
Quality is at 90%, PCM (“Uncompressed”) Audio is selected [mainly for editing compatibility], a higher compression (“Smaller file Size” option) is chosen (and a Keyframe interval of “1” is suggested for compatibility with editing applications such as Vegas, Premiere, Lightworks, etc. if required [only change if needed as it increases file size, no green arrow indicator is shown on the Keyframe Interval])
Click to see Full Size

Overall, I think ‘Bandisoft’s version of Xvid’ in Bandicam does a decent job with Quality – and is downright excellent where Performance is concerned. On my system (and hopefully yours), Bandicam’s Xvid had very little drain on the performance of the game while recording with it, creating very little ‘lag’ while recording (it had a low ‘performance hit’). As long as the quality setting is kept high (90-100%), the recorded output Quality can be quite acceptable, with only a little Macroblocking (block shapes being visible) and Posterization [colour quantization, which is a reduction in the amount of colours, resulting in ‘colour banding’ or ‘bands’ seen] in the darker and ‘flatter’ areas of a frame in a game recording (Macroblocking may occur in areas such as skies, less-colourful regions, etc). Try out some recordings with Bandicam’s version of Xvid for yourself and see if you prefer using it for recording your gaming adventures.
Please note dear reader, that I am not saying “this codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – use what you prefer. 



See you in the games!


Personal Short Version/Opinion:


While the Bandisoft-optimized version of Xvid included in Bandicam works pretty well and is fast, I find myself not using it very often, other than this past month or so, for testing. After recording for a while with Xvid’s ‘successor’, h.264/AVC, the extra features of Deblocking and other tools in AVC have ‘spoiled’ me. Going back to the slightly more ‘blocky’ output of Xvid – even though it creates very little lag when recording – is slightly distracting to my eyes. When I see an Xvid game capture of mine now, my eyes are instantly drawn to the darker/flatter areas of the scene and those little tiny block shapes…and I sigh at the slowly-aging Xvid codec, remembering its’ heyday’ of compressing my TV shows recorded on my ATi TV Wonder PCI card. The late 1990’s and the 2000’s were ‘Xvid’s Time’ to me, when I used it for almost everything – and while it performs well in game recording today (even Xvid.org’s ‘Official’ version, with the right settings), I am now just too used to the benefits of more modern codecs, like h.264/AVC, which can even use the videocard/hardware, for GPU-accelerated recording.

I realize there are a lot of people gaming on laptops out there, and not everyone has a dedicated/separate videocard inside their system to record with, but the more I use my GPU to record with, the more I am impressed with the performance when recording most games [note that some games ‘don’t like’ GPU-accelerated recording (are not fully coded for compatibility with it) and these games have large hits to performance with it]. At the moment of this writing, I have two NVIDIA videocards running in my system (performing together in SLI mode) and I am enjoying using the GPU-accelerated CUDA offering in Bandicam to record with. Like AMD’s AppAcceleration and INTEL’s QuickSync, CUDA utilizes H.264/AVC through the hardware to record, having high performance [for most games] and producing nice output, utilizing some of the newer aspects of MPEG-4 (such as Deblocking) when recording, to hide compression artifacts [the little ‘glitches’ from compressing the video]. The speed, and presence of light ‘compression correction’ from this hardware implementation of MPEG4 has spoiled me now, and I am finding it hard to go back to the slightly more obvious artifacting in ‘older’ codecs, such as MPEG-1 or Xvid (which is ‘older’ MPEG-4), especially when those codecs are used at lower quality settings, to try and save hard drive space. (Turning up the Quality settings for these codecs helps a lot, if your system can handle it)

As CPU architecture evolves and modern CPUs have ‘mini-GPUs’ built into them, the differentiation of capability between ‘gaming rigs’ and ‘gaming laptops’ blurs [as far as game recording goes], as GPU-accelerated game recording is possible now by less and less expensive hardware (AMD APUs) and processors (INTEL’s QuickSync), even within laptops [as opposed to full desktop systems]. This means that “gaming laptops” now have much more capability when it comes to game recording, today. If your laptop is capable of using GPU-accelerated recording, give it a try. If it is not, systems that do not use the GPU to compress their video can still perform well recording games, as is shown with the above article, by using Xvid. “If you can’t choose the H.264 encoder in Bandicam, choose ‘Xvid'” ~ Quote from the Bandicam.com website.

Do some testing of your own dear reader – and have fun experimenting, finding a codec that you will eventually prefer to record with – and See You In The Games…
Last Remarks (in addition/continuation to the Prologue of this article): 
Another thing to keep in mind is, that my settings (both for Recording and Editing/Rendering) change slightly over time… I may have been able to purchase a new disk drive recently for instance, so then I will allow my recordings to take up more space [for a while anyway]. I may be trying out a Demo/Trial of a new version of a Video Editing Application, so I have been experimenting with some different Rendering settings. Perhaps a videocard driver or codec was updated, so now I will experiment a bit with the recording application settings, seeing if I can squeeze a little more Quality out of my recordings, while keeping the Performance high. All of these reasons and a few more, are why my settings constantly change over time. Don’t worry, I’ll try to remember to come here and share them with you, anytime I find a “Good Combination” that works well for either High Quality or Fast Performance, the ‘Holy Grail’ of course being a Perfect balance of both. 
As I have begun more dedicated testing over the past few years, I have found that specific games themselves ‘prefer’ certain recording and rendering settings over others. What I mean by “prefer” is: as new game rendering engines are written, hardware architectures change, and programmers utilize ‘something over another’ in general during a game’s development, this affects what settings a game ‘works better with’, whether it is a specific game recording program, hardware/GPU, or specific recording and rendering settings; hence my usage of the word “prefer”. 
This is why, for example, some games will perform better on an AMD/ATi-based videocard in Benchmarks and Reviews than an NVIDIA-based GPU – and then other games will have better results on an NVIDIA-based videocard over an AMD/ATi-based GPU – those games were simply being developed [the programmers wrote the code] on a system with that certain GPU installed in it at the time. This also means there is a chance of specific optimizations in programming that slightly favour one brand of GPU over another [and they may even have been ‘compensated for their efforts’ by that respective company, but *shhh* these things aren’t spoken of outside Mordor]. 
In regards to the above and game recording, I have found that some games will have better performance with different game recording applications as well. For example, one game may have less of a performance hit while recording with Dxtory and then another game will have better performance recording with Bandicam [as an example] – it all depends on the code and how it is written and being rendered. That’s why I ‘change it up’ so often, altering my recording settings (and rendering settings) as each game I play exposes its nuances. That’s what I mean if I ever say a game ‘seems to prefer’ recording with one game recording program over another. 
Keep this all of the above in mind then and also remember dear reader, that I am never telling you “you should use this”, I am always suggesting only a possibility in my posts, and it is always up to you to try it out and decide if you want to use a recommendation of mine or not.
 [I encourage everyone to always take the good ideas from others and leave the bad, making up a composite of their own liking and preferences and what they want to utilize – whether it is with game recording and editing, or Life In General – but, that last part is for another blog…] 

 **[designated as “Xvid(b)”, to show that it is the “Bandicam-Optimized Version of Xvid”]

1st I’ve seen or heard of a GM supercharger on a 1958 Corvette

10 TIPS TO DECORATE KIDS BATHROOMS

Teach young children the fundamentals of responsibility bathroom can be a challenge. From potty training to control the way you brush your teeth, bathroom children should be a place of inspiration and pleasure for them to learn and grow. Child bathroom decoration can borrow design elements of your room. With color, the creative organization, and areas designed exclusively for little hands and creative minds, here are 10 tips to decorate their bathrooms. Depending on the age of your children, follow these tips to design your age in mind. For young children, bright primary colors are inspiring, and for older children feel more mature palette of neutrals and pastels.

KID’S BATHROOM DESIGN

KID’S BATHROOM DESIGN

1) Create a colorful background: Although most of the plumbing fixtures remain in neutral shades of white, bone or brown, it is essential to their subject is colorful and fun. Consider painting the vanity, wall, wallpaper, stenciling and playful lyrics on the walls. Be careful when you use the stickers that moisture in the bathroom can lead them to ignore good.

2) Keep the walls with clean surfaces sustainable: When decorating a child’s bathroom, especially around wet areas such as toilets, sink and bathtub, make sure the surfaces are easy to clean and durable. ceramic wall tile, wall painting wainscoting panels are washable and ideal.

3) Provide adequate lighting. This advice applies to any bathroom! You do not have dark areas in the bathroom. In terms of cleaning and a bit to see what they do. Bathrooms for children are a priority area of ​​injury, as wall lighting, overhead ambient lighting, ceiling lights and even in the vanity are clear and are not shadows.

4) the organization is the key to learning, children’s room when decorating a child to remember to put the bathroom easy to find areas of the organization, and easy to reach new heights. Vanity sank in open shelves under the bath toy suction cup holders and bins hygiene products to help children to keep the bathroom clean and tidy.

5) Small furniture a little ‘small: Believe it or not is a fitting suitable for babies and small children. There are different estimates for lower mobile is a good lesson for children how to use the toilet. Regardless of the customer, when planning your baby’s bath, to know the options are there for the growing child.

6) to accessorize on a budget: You can spend a fortune to decorate the bathroom of your children also understand that a simple color palette of coordinated accessories that are affordable, can give an overly great! From color-coordinated towels, rugs, shower curtains and hygiene products, operators can combine colors and patterns and decorations.

DECORATING KID’S BATHROOM

DECORATING KID’S BATHROOM

7) The theme of the election: if you are at a loss how to decorate your bathroom kids, consider to choose a theme they have. Derived from animals, sports and entertainment activities to spend time with their favorite cartoon characters and favorite color, the options are endless. If a child is old enough to ask them their opinion on how they would like to decorate your bathroom.

8) Bathroom safety: Make sure the bathrooms have the proper procedures instilled in interior design. Even though a beautiful crystal vanity knobs cabinetry might be nice to see, if not secured properly can be dangerous for children. Make sure all the furniture, harmful chemicals, and decorative elements are not easy for children.

9) Update bathrooms of a teenager: For older children and adolescents want to want to accessorize and color coordinated decor may not be as strong. Instead, opt for temporary accessory that can change depending on your mood teenager! colored towels, rugs can coordinate a work of art hanging on the wall all have their own bathroom needs to make your teen feel comfortable in their space.

10) Keep it simple: It ‘s easy to wrap decorate any room in your home. Remember to have fun when decorating your bathroom children, and to seek inspiration from blogs, interior design magazines and shops to visit in local dishes. Many stores offer “instant bathroom furniture for you. combinations of color coordinated accessories, you can mix and match. No thought required!

Bring together elements to your bathroom decor kids can be fun and easy to use these 10 tips. Consider your child’s age when decorating, as well as a way of life. If you are a busy parent who does not have time to clean the bathroom with lots of toys to keep open the basket and quick cleaning areas. Remember that you are teaching and inspiring children to enjoy swimming and creative learning.

LUXURY DECORATING KID’S BATHROOM

LUXURY DECORATING KID’S BATHROOM

Fallout 4: High Resolution Texture Pack (Free DLC) Is Now Available [Notification]

For those that haven’t heard yet, as mentioned last week at their site here, Bethesda has released a High Resolution Texture Pack, that is now available for free, downloadable via Steam.

The graphic ‘upgrade’ includes ‘native 1440p’ textures [which means the textures themselves are 2560×1440 pixels in size – but remember, textures usually aren’t displayed at Full Size, they are squished into say, the sides of a gun, or a sign or other things in the world – even if they cover a large wall in the game, they will usually not display ‘at full native size’ – and even if they do, they can be repeated (“tiled”) to fill in the space of objects needed, in the game world – basically, 1440p textures should make the game look great]. It also includes Enhanced Draw Distancing and God-Ray tweaks [those glow-y, streaks of light, showing up especially when a source of light is behind something, such as the sun behind trees or buildings].

Now, up until this release, I personally was playing with SweetFX a lot in FO4, having fun increasing Sharpness and Shading, dealing with the Aliasing, taking Screenshots and ‘Realistic Photos’ and ‘Close-Ups’ (with Depth-Of-Field, etc) of some of the Characters in the game. These can be found here, at a slowly-growing Flickr page I started for The Blog. A couple examples of these, taken with ‘SweetFX in ReShade’ are just below – I look forward to what the entire game could possibly look like with the new High Resolution textures!

Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size
Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size

ReShade by Crosire (reshade.me)
SweetFX by CeeJay.dk (ceejay.dk)
Game Material by Bethesda Game Studios (bgs.bethsoft.com)
Captured by Troy from The Game Tips And More Blog

Since I don’t actually have room for it on any of the drives I have Games on at the moment [which seems to always happen when something cool comes out, of course], I will be moving some things around and uninstalling other games I am not playing at the moment, to make room for this big fella…

It is an optional/separate “DLC” download, weighing in at a hefty 58GB installation through Steam. Once I get it going, I will be working on a QualityTest for it, comparing the graphic look between the two versions and what they really look like in-game – as well as the Performance Hit the Texture Pack creates – look for that coming post Soon™ if you are waiting to see what they look like or if it is ‘worth the download’; but if you can’t wait and want to get started seeing it yourself, go get it via Steam for free now, here.

This free download, by the way, is – in Bethesda’s own words, “…a love letter to our amazing PC fans that have supported us – not just with Fallout 4, but across multiple decades and games…”. 
Right back at ya’, Beth! 
“Thank You” ~ Sincerely, The Game Tips And More Blog

Header and Footer Images captured by Bethesda, from their example screenshots of the High Resolution Texture Pack

How to Get Rid of Cellulite

Although the vast majority of woman have some cellulite somewhere on their body – nobody likes it!   So what the heck is cellulite anyway?  Cellulite is pockets of fat that have squeezed between bands of tissue, called septae, that are located below your skin.

Women of all races get it, while virtually no men do. That’s because the septae of men are different from women. Men have stronger bands that are cross-hatched allowing them to keep fat in place more effectively. Women have weaker, vertically oriented septae that allows fat to squeeze through easier.

Both thin and heavy women have cellulite. However the higher your level of body fat the more noticeable the dimpling will tend to be.  Unfortunately dieting does necessarily help eliminate cellulite. Losing weight helps sometime, but in some cases weight loss makes cellulite worse.   This occurs when skin becomes saggy after significant weight loss.

There is a definite genetic component to cellulite which does run in families.
Hormones also are part of the equation with cellulite, but science has not figured out exactly how hormones contribute to cellulite.  What is known is that cellulite starts at puberty which is a time that many hormone levels change significantly in females.

Getting Rid of Cellulite

Getting rid of cellulite is easier said than done.  Even treatments like Liposuction are not necessarily effective.    In fact Liposuction often makes cellulite worse by leaving your skin even more puckered looking than it was before.

Dermatologists are quick to point out that there is no magic cure for cellulite, but there are ways to make it look better!   Two of the keys are working out and dropping excess weight sensibly (1lbs per week! – faster weight loss can exacerbate the problem!)

Resistance training is key.   As you increase your muscle size and decrease body fat your skin looks smoother.     If you lose fat while you simultaneously build muscle your cellulite will improve.
It is also important to work on the health of your skin as you age to make it more elastic so that as you lose fat the skin pulls tight rather than sagging.    

Certain topical treatments that increase collagen in the skin, like Retin-A or creams with retinol or vitamin C, cannot hurt and may help.   

Maintaining adequate water intake is also key for skin health and elasticity – 6 – 8 glasses of water per day is key.

If you have faithfully tried everything and your cellulite is driving you crazy and you are prepared to spend some serious dollars – Cellulaze – is an FDA approved therapy.  Cellulaze involves inserting a lazer under the skin and projects heats in three directions and literally liquefies fat as it cuts the septae around fat cells which can reduce the puckering while also encouraging collagen regrowth.

Cellulaze claims a 70 – 80% improvement in cellulite that lasts a full year.  It is most effective for active women with mild to moderate cellulite who are not significantly overweight and who also have good muscle tone.

Unfortunately, Cellulaze is not cheap – costing $5,000 – $7,000 depending on the size of the area being treated.

Reading in the Wild – Chapter 1

I absolutely loved Donalyn Miller’s book The Book Whisperer: Awakening the Inner Reader in Every Child, so I was very excited to see that she released a new book – Reading in the Wild: The Book Whisperer’s Keys to Cultivating Lifelong Reading Habits AND that Catherine over at The Brown Bag Teacher has organized a summer book study of it.

Chapter 1 – Wild Readers Dedicate Time to Read

Already, this book has lots of ideas that I can integrate into my classroom. In fact, I suspect that I will re-read each chapter just to make sure I’m recording all of the ideas so I remember them in August. (And I may go back and re-read The Book Whisperer, too!) But one thing that I really want to emphasize this year is building a community of readers. I like the idea of students sharing the books they’re reading and making recommendations to each other. Personally, I use GoodReads to track that information for myself (I’ve blogged about that before here). I’ve also had my students blog about their reading (see here). But what I’d really like is something more like GoodReads – a social networking site – but appropriate for fourth graders. 
I recently stumbled across the site Reading Rewards through a Twitter Chat, and this might be the answer I’m looking for. 

This site allows you to set up your class into a reading community where they can create libraries of the books they’ve read, write book reviews, get and make recommendations, and make a wishlist of books they want to read. There is also a reading log component and a reward system that allows you and parents to create rewards based on achieving individualized reading goals. I haven’t had a chance to try this out with students yet, but based on my exploration of the site, it looks very promising.

Do you have any experience with the Reading Rewards website? Have you come across any other sites you’d recommend for building a community of readers? I’d love to hear about it in the comments.

Interested in opening your own WORKOUT ANYTIME?

Think big. Keep it simple. Do it with integrity.”

Those are the guiding words of John Quattrocchi, co-founder of WORKOUT ANYTIME. Together with Steve Strickland, John and Steve have drawn from their 40 years of industry knowledge to create a proven, ready-to-run business opportunity for your success.

Proven Formula – The WORKOUT ANYTIME system operates with low-overhead and delivers high customer satisfaction. Our clubs fit into a range of retail spaces, can be run by a tiny staff, and offer the best workout per square foot in the industry. Unprofitable amenities like the pool, spa, courts, aerobics classes, and childcare have been eliminated in favor of a $15 no-commitment price that keeps members onboard month after month after month.

“People join a club to lose weight, build strength and feel better,” explains CEO Steve Strickland. “But eventually, they fall off because of two things: high price and inconvenience. We built a system that offers an unbeatable workout, an inexpensive recurring payment, and 24-7 neighborhood convenience.”

Matrix Equipment – Top equipment is a crucial component of the WORKOUT ANYTIME formula. Steve Strickland’s career experience in both the equipment and club sides of the industry has guided the equipment selection and floor plan. The WORKOUT ANYTIME fitness layout ensures that members never have to wait for the much-desired Matrix treadmills (10+) and cardio gear.

Easy to Get Started – Franchisees usually join WORKOUT ANYTIME with little or no experience in the fitness industry. Some even keep their existing jobs. Yet, our turnkey systems, vendor agreements, equipment sourcing and leasing support make it easy to get started and easy to succeed. Here’s how our ready-to-run approach guides you every step of the way:

Site Selection and Lease Negotiation

– We maintain a network of experienced real estate brokers nationwide who specialize in tenant representation
– Site selection/lease negotiation service offered at no-cost to franchise owner
– In most cases WORKOUT ANYTIME Franchisees receive a generous tenant improve allowance (cash), and up to 6-months free rent per deal
– WORKOUT ANYTIME’s site criteria includes demographics, access, parking, visibility, tenant mix, competition, and the economics of your club

Find out more here. 

Number Talks Book Study – Chapter 2

The farther I get into the book Number Talks, the more excited I am about implementing them next year. This is such a great resource, and I’m only on Chapter 2!

I’m linking up with Misty at Think, Wonder, & Teach for her fabulous book study. If you haven’t checked it out yet, be sure to visit her because she’s already offering some great resources to support the book (whereas mine are still works in progress!).

This chapter walks through some of the nuts and bolts of setting up number talks, and it describes how to manage some of the procedures and expectations. One of the sections that really resonated with me in this chapter was about building accountability with the students. So often, there are a few students who are eager to share their mathematical thinking, and there are many others who are willing to sit back and let those students shine. I don’t like pulling sticks with students’ names for something like this, but I also don’t want students to feel like they don’t need to participate. This book offered some great strategies for dealing with that:

1. Once all of the strategies have been shared, number them and have students show with fingers which one they found to be the most efficient strategy. This will get them thinking about the math involved.

2. Keep records of the problems posed and strategies used, and label them with the students’ names. I plan to use my iPad to track this. I’ve talked before about setting up student data notebooks on Evernote, and I think that would be the perfect platform to track student participation. I can photograph students’ work and add anecdotal records about what I observe. It would also be easy to share with parents at parent-teacher conferences.

3. Hold small group number talks throughout the week. As I prepare to transition into more of a math workshop/guided math approach, this seems like a very viable option.

4. Create and post anchor charts of the different strategies that students are using. The book names a variety of strategies, or you could develop names with your students. Having the charts available to reference could scaffold the less confident students.

5. Use exit cards. The authors recommend giving each student a notecard. On one side, students should record their solution, and on the other side, they should record a strategy that another student shared that they liked.

6. Give a weekly computation assessment of 5-10 problems. The selected problems should reinforce the concepts and strategies introduced throughout the week. I can also imagine using an app like Show Me or Explain Everything to assess. These are whiteboard apps that allow students to record audio on top of their drawing. Students could record their solutions and narrate them as if they’re presenting them to the class. This would be another important artifact that could be saved in the student’s Evernote portfolio to share with parents or an RTI committee. If it’s only one problem, most students would be able to complete the task on the app in 5-10 minutes as the video they’d be creating should be less than a minute long.

I think these accountability measures could be effective in getting students to participate more. Of course, the classroom environment will matter, too, and I look forward to setting those factors in place for my Number Talks this fall.

In other news, I’m excited to share that I’ll be participating in Sabra’s book study of Word Nerds at Teaching with a Touch of Twang. Word Nerds explores strategies for teaching vocabulary to students, and it’s another fantastic resource. It’s published by Stenhouse, and you can preview the entire book online or you can purchase the book in Paperbook or Kindle edition.

The book study starts on Thursday and runs throughout the summer. You can see the full schedule by clicking on the image above. I’ll be hosting Chapter 7, and I can’t wait!

Also, have you joined in the Teacher Toolbox Trio Linky Celebration yet?

You still have time to link up and be eligible to win a $25 Teachers Pay Teachers gift certificate! The linky celebration will close on Friday night, so be sure to join the fun. My wish list has definitely grown as I’ve seen all of the fabulous resources other teachers are sharing and recommending.

My trip to Vietnam Cont….

I finished the organization capacity assessment of the 5 local civil society organizations (NGOs) in Vietnam. They are all working or trying to work in a “rights” based approach. The main services of these local NGOs are focused towards marginalized groups, ethnic groups etc. However this is not what the Government wants; they prefer them to work on a needs based approach.

They have therefore come up with a way to allow such organizations to work on a slightly different rights based approach. However this is a structured method which can be monitored by the Government. This is how it is set up:

All international non governmental organizations (INGOs) have to be registered with the ministry of foreign affairs under “VUFO” – Vietnam Union of Friendship Organization. VUFO is the organization which deals with the administration of INGO policy and compliance as it were. Under VUFO they have what is known as the NGO Resource Center which deals with some operational issues as well as help set up working groups under thematic areas. (E.G: HIV AIDS, Gender, LGBT etc.)

All/most (there can be exceptions) rights based local non governmental organizations are registered under “VUSTA” – Vietnam Union of Science & Technology. VUSTA is the organization which deals with the administration of local NGO policy, compliance and deals with the operational issues as well as help set up working groups for thematic areas.

Both types of working groups in theory are independent; however they can have representatives from ministries, other government agencies, communist party advocacy committee etc. in addition to like minded NGOs and INGOs.

Through these working groups research based policy alternatives (advocacy and lobby for rights based services & opportunities) are submitted to each relevant ministries. This is then passed on to the cabinet of ministers. Based on the agenda of the National Assembly cabinet may submit these policy alternatives to the assembly who may or may not approve, amend or adopt these policies. It sound quite easy but in practice this is a long process.

Many organizations do not have long term resources to sustain this type of process. However based on authority levels at different levels/branches of the government some organizations are able to get the corporation of the government to deliver right based services themselves or through quasi government agencies.

The “local NGO” in general is a relatively new phenomenon in Vietnam. They tend to be small and with low capacity. They have the potential to play a key role in delivering services to special interest groups and ethnic minorities in Vietnam. There are some clear examples where the government has allowed the use of this method effectively in isolated cases.

There is a significant difference to how international & local NGOs operate in Vietnam, Lao, Cambodia, China, Mongolia & Myanmar. They have learned to operate within the service gaps of these socialistic countries and they are beginning to get noticed for the excellent work done, by their governments and civil society in general. However, they too face some of the most common issues such as resource mobilization, retention of staff, planning, budgeting, monitoring etc. faced by NGOs the world over.

Now about Hanoi; it is indeed a busy city and one that is growing rapidly I really like visiting Hanoi and the friendliness of the people of Vietnam. I visited most of my favorite cafes and bars which I patronized on my previous travels to Hanoi. Everywhere you look you see construction sites (Except central Hanoi) these buildings are mixed developments like what you saw in Dubai several years ago. They are still to go in for developments such as Dubai Marina, Dubai International Financial District; I counted over 40 cranes on the drive from the airport to my hotel. They do not seem to be affected as much as the others in terms of the global financial crisis.

Walking through the streets of Hanoi I noticed something unique to Vietnam (I think). Most of the Hanoi streets are dotted with Café’s and restaurants. With the vast majority of the Vietnamese using motorbikes for travel, each one of the establishments have something resembling a valet parking for those patrons arriving at the establishment in their motorbikes. The parking attendants use a white chalk to mark on the seat of the motorbike the number of bikes parked in the day / rider / owner / and parking sequence. When patrons leave the parking attendants starts moving the motorbikes closer to the entrance (perhaps for tips) and it is done on a continues basis. I was fascinated by this as my experience in other parts of the world is that they put up a huge sign saying that parking is at your own risk; and they are only interested in what you spend at the establishment and keen to get you out as soon as they can so that another patron can be served. Hope this continues in the future as well.

I will be flying home tomorrow and will prepare for 3 more assignments which have simultaneous time lines. Organization Capacity Assessment of research & policy advice organization in South Asia, Organization Capacity Assessment of 5 local NGOs in Indonesia. Organization Capacity Assessment of 4 branch offices in the east of Sri Lanka.

BEAUTIFUL HOME FAMILY DESIGN “VILLA DE CHARME”

Katrine Martensen-Larsen comes this stunning house designed for a family of seven children. We hope that this message will come in handy for those of you looking for new ideas for the nursery too. “Villa de Charme” is located in, Frederiksber Denmark and has been specially designed for a family of seven children. The designer said that this house is “evidence that many children and a hectic lifestyle does not mean you have to compromise on style.” The interior features original decorating ideas and news. The wallpapers are particularly interesting. White is used mainly to define the house and gives it an intimate feeling clean and fresh. bits of color are added here and there, crying the whole design. We really appreciate how serious, sober rooms alternate with play.

BEAUTIFUL HOME FAMILY DESIGN

BEAUTIFUL HOME FAMILY DESIGN

BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

BEAUTIFUL KITCHEN HOME FAMILY DESIGN

BEAUTIFUL KITCHEN HOME FAMILY DESIGN

BEAUTIFUL BATHROOM HOME FAMILY DESIGN

BEAUTIFUL BATHROOM HOME FAMILY DESIGN

BEAUTIFUL BEDROOM HOME FAMILY DESIGN

BEAUTIFUL BEDROOM HOME FAMILY DESIGN

Essential fats

If you have been doggedly avoiding fat in an attempt to lose weight — this approach is WRONG. You need fats in your diet. Your brain consists mostly of fat, and your intelligence, heartbeat and muscular movements all depend on it. The only way in which your body can send electrical messages through living tissue is via your nerve cells and their connectors, which again are made of fat.

The fact is that some fats (known as lipids) are essential. They act as the second energy reserve behind glycogen, providing most of their energy at around 70 per cent of maximum heart rate. Endurance athletes utilize fat as an energy source more than other sports people and this is why they tend to be lean.

Fats are not just for energy, though. Their many other functions include insulating important organs, carrying fat-soluble vitamins and regulating hormone levels. If you’re a female athlete and you experience a loss of your periods, this may be due to extremely low body fat, for this plays a vital role in the activation of the female hormone oestrogen.

Fats also contribute to health in many other ways — provided they are of the right kind. In an attempt to warn people about the risk of consuming toomuch fat, certain groups have created the impression that all fats are bad, but this simply is not true.

Diet Start

Are you eating the wrong fats?

Many people in the Western world are getting 45 per cent of their calorific intake from fats, but these are junk fats that the body cannot use, so these people are just as fat-deficient as those on extremely low-fat regimes.

THERE ARE TWO MAIN TYPES OF NATURAL FATS:

1. Saturated fats come primarily from animal sources such as meat and dairy products, and from coconut and palm-kernel oil; they are solid at room temperature. They provide the body with a stored form of energy in fat cells.

2. Unsaturated fats are found in vegetables, nuts, grains and seeds, and in fish and game; they are liquid at room temperature. They contain two fatty acids that are essential to life and, more importantly, that the body cannot produce itself. These are linoleic acid (omega-6) and linolenic acid (omega-3) From these two ‘essential fatty acids‘ your body can make all the other fatty acids it needs.

Is it just a case of cutting out saturated fat?

Saturated fat gets a bad press, and a diet too heavy in it has been closely linked to cardiovascular disease. However, there is another fat with an equal capacity to harm: hydrogenated fat.

Hydrogenated fat is solid or semi-solid at room temperature (the best example being margarine). It is created when a liquid oil (such as corn oil) has hydrogen added to it, changing its chemical structure. This in turn can interfere with the metabolism of some essential fatty acids. Research has shown that the trans fats in hydrogenated fats can increase LDL (poor) cholesterol,decrease HDL (good) cholesterol and thus raise the risk of coronary heart disease. Hydrogenated fat is found in almost all processed foods, plus frozen convenience foods and deep-fried fast food. This is another good reason to say goodbye to junk food and hello to fresh produce.

If you usually ingest high amounts of processed fats and use commercially altered oils for cooking, then you are certainly not getting the balance of fats that your body needs.

Why don’t food manufacturers use healthier oils?

Even though the food industry uses vegetable oils that contain a reasonable amount of omega-6 fatty acids, they avoid omega-3s because these are more susceptible to oxidization — in other words, they go rancid quickly and don’t have a long shelf life.

Ironic, isn’t it? Food manufacturers quite happily promote food under the guise of lowering cholesterol and reducing heart disease, but they are ignoring one of the fats essential to health. So unless you are eating high amounts of fish, fish oils, leafy vegetables, nuts, unrefined olive oil, tofu or flaxseed oil, your ratio of omega-6 to omega-3 fats is probably screwed up, and this in turn will be screwing up your health.

The current Western diet is much higher in omega-6 fatty acids than omega-3’s. Remember those healthy Palaeolithic people we were discussing earlier? They were eating equal amounts of both.

How is this relevant to body weight?

If you are eating a diet with a good balance of omega-6 and omega-3 fatty acids, this will affect your body in beneficial fat-burning ways:

  • Your metabolic rate will be increased, as will the metabolism of fats, so more stored fat will be burned for energy
  • Your cells’ sensitivity to insulin will be increased, so that it regulates blood- sugar levels more effectively
  • The ratio of insulin to glucagons will improve, which will unlock the fat- storage banks and again allow fat to be burned as energy
  • Natural appetite suppressants will kick in.

So if you want to improve your chances of losing weight, you need to up your intake of omega-3 and other healthy fats.

Essential fats Q&A

Q. How often should I eat oily fish per week if I want to consume enough omega-3 fatty acids?

A. You should aim to eat oily fish a minimum of 2-3 times per week, or ensure you use flaxseed oil regularly on salads to raise your levels. Try to eat fish from as safe a source as possible as many coldwater fish are contaminated with heavy metals and pesticides.

Q. How can I avoid hydrogenated fat?

A. Cut out processed food and only use cold-pressed un-refined oils such as olive oil, or coconut oil for cooking. Don’t eat fast food that has been deep-fried and avoid butter type spreads. If you did this, then you should be able to avoid consuming dangerous trans fatty acids.

In One Sentence™ – A Battlefield Hardline Main Weapons Overview [Very Short Reviews Of Each, Currently Text-Only]

[In light of the DOUBLE XP EVENT going on right now for Hardline, I wanted to get this hopefully-helpful information up right away for everyone – so here it is without any Screenshots yet – I am collecting some together and plan to place them in-line within, Soon™]

In One Sentence™


A Battlefield Hardline

Main Weapons Overview


By: The Game Tips And More Blog


Presented in a Document-sorta-but-not-really format

I was in the Battlefield Hardline Beta, but didn’t write about it at the time [and have only played off and on since then ‘for fun’ – that is, not really getting into collecting information for others, that they could use – well, other than one Introduction To The Sabotage Gadget tutorial I did quickly a while back… I wish I did more, but I wasn’t feeling up to it, sorry all..].


Recently, I was testing out Origin Access (signing up for one Month, to see if you ‘lose’ things you have Unlocked/Earned after Cancelling the Subscription – which I will write about once it expires) and I have been playing a bit more as well [as I can], wanting to go through each Weapon in Hardline and give a really short ‘Review’ of each, to give everyone a Basic Overview of them – I dubbed these ‘mini-reviews’ the highly-creative-and-original “In One Sentence”™!

Here then, is a listing of all of the ‘main’ weapons in the game, that is, the Primary (eg. Rifles) and Secondary (eg. Pistols), the Thrown (eg. Grenades) and Melee (eg. Knives) categories, with a one-sentence ‘review’ of every single one of them – at least for all of the ones I have Unlocked and have available since starting Origin Access [which opened up all of the Expansion Weapons – there are only about 3-4 types missing out of all of them now… I may ‘tweak’ the descriptions over the next little while but other than small phrasing changes and adding Images later, this is the list, ready to go.]

The list itself is divided into the Classes available in the game, listing all Primary and Secondary weapons available to that class to Purchase and Use, roughly as they appear on the in-game Menu Lists, with the Thrown and Melee weapon categories at the end. As such, there are some overlap/duplicated entries when written in Text form (eg. a pistol found in the Professional list will also be listed in the Operator list, if they both can use them, with the same or nearly the same Review/Overview for each listing). This way though, you can just skip to the Class section you are interested in playing and see the Weapons as they appear in the game, not having to worry about searching for the Weapon name itself.

I would like to do the Gadgets (Class Special Tools) as well, sometime in the future – but for now, enjoy these little summaries of the Main Weapons available, to give you an idea of them if you are a newer player, or to help you in finding something that fits your playstyle (eg. perhaps you want a ‘slow and hard-hitting’ weapon or perhaps you prefer a ‘fast-shooting with lighter damage’ one, and so on) – hopefully this information will help you out in some way, especially if you are new to Hardline (I have already seen an influx of new players since recent EA/Origin Sales, which is great to see). Enjoy, dear reader, and get in there for the Double XP Event on now – and See You In The Game!

Rating Key (if applicable to weapon, when used):

? = Not sure [yet] if they are Criminals-only or Cops-only usage

* = Weapons I ‘Liked’ (fit my playstyle(s), is unique in some way)

** = Weapons that are A Personal Favourite (I use a lot or ‘mainly’ would use)

Scout Elite = A fairly fast-shooting and silence-able sniper rifle with medium-high damage, this Default Professional weapon only improves with Unlocks. **

R700LTR (Cops) = A slow-firing but powerful killer that is silence-able, Magnum Rounds can be Purchased after 50 Kills to make Vehicles cry. *

AWM (Criminals) = Feeling much slower than the Scout – but also seeming more powerful – the first thing I would want to unlock is the silencer for this big boy.

388-Recon = Feeling like it has decent ‘punch’ and good range – if the Scout is “fast” and the AWM is “slow” then the 388-Recon is “middle-of-the-road”, in terms of rate of fire, it seems. *

.300 Knockout = What was once a fast and sleek one-hit-kill-machine, worthy of its’ lengthy and difficult Unlock, this rifle has since been Nerfed™ with a slower firing rate and its’ one-hit-kill ability taken away – and while still powerful and silent, to those who used it in it’s former glory, it is now a slow and decrepid version of it’s former self.

AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

M98b = This bolt-action sniper rifle packs a mean punch – it has so much power it can shoot pilots inside helicopters [I’ve done it! Once! lol] and has very little bullet drop-off – it can even be silenced, but it can it ever be equipped with a Straight-Pull Bolt (to allow you to shoot again without going out of scope) and its firing rate is pretty slow.

M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

SOCOM16 (Cops) = A medium-damage semi-automatic rifle that can be silenced, it feels somewhat inaccurate – but it does have the ability to fire quickly.

SR-25 ECC (Cops) = A semi-automatic rifle that can be silenced, its decent damage along with its fast firing rate will make this a formidable weapon to use, if the medium-low recoil (which feels less than the SOCOM16) can be accounted for. *

M82.416 = Even though the firing rate of this un-silenceable rifle has been severely reduced since I last played with it in Hardline (with the ability to fire a number of times a second back then), it remains quite the hand cannon (firing about once every second now) – with so much power there is very little bullet drop (and it can still take out pilots inside helicopters) – I think it did more damage back then too, but it is still nice to use for the sense of power it brings. *

RO933 M1 = A silence-able rifle that seems to be able to fire as fast as you can click, I like to run this one with an Infra-vision scope, hide in the bushes – and let the bullets fall like hail upon the enemy from the shadows. **

SAIGA .308 = A fast-firing rifle, this one ‘feels fun’ to run with even though it is a little inaccurate, because it has decent damage output. *

PTR-91 = A rifle with mediocre damage, its’ fast fire rate can make up for it, if the medium-ish recoil can be compensated for.

SP-AR = Although fast-firing, this rifle isn’t very accurate while doing so, with its’ high recoil – at least it as a neat, unique ‘report’ [sound].

M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, staying on the edges of the area, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **

M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).


RO933 BLK = [N/A, Haven’t Unlocked Yet, sorry]

M110K5 = [N/A, Haven’t Unlocked yet sorry]

1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

MAMMOTH GUN = [N/A, Haven’t Unlocked yet sorry]


SYNDICATE GUN = [N/A, Haven’t Unlocked yet sorry]

A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

G18C = Although fast-shooting, this pistol feels a little inaccurate.

93R = With good accuracy and higher damage, this little bad boy can even be silenced, eventually. **

MAC-10 = While the recoil will have you shooting at the sky for the most part, this little guy will spit out bullets and damage faster than a shaken baby spits out broken teeth to make up for it – it’s just that you may be out of ammo before the enemy dies.

MP9 (Cops) = Surprisingly accurate if you can compensate for the recoil, this little fella doesn’t have much in the way of scopes, but it can be silenced after 90 kills. **

TEC-9 (Criminals) = Although fast-shooting, this little guy isn’t the most accurate puppy in the litter (but if you use the sights it does help) – it also doesn’t do the greatest damage, it seems.

IMPROVISED GUN = With decent damage output, decent accuracy and a nice ‘feel’ to it, this little fella is fast becoming a Personal Favourite. **


DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

870P MAGNUM = Although this is a slower-firing pump-action style shotgun, it has very high damage output and a little bit of range, too. *

SPAS-12 = While still a pump-action shotgun, the SPAS-12 fires faster than the 870P MAGNUM and it feels like it has a bit more accuracy, too – it just doesn’t do quite the damage of the 870P.

SAIGA-12 (Criminals) = With a nice rate of fire, it feels like it does damage somewhere between the SPAS-12 and the 870P MAGNUM. **

STAKEOUT (Cops) = With damage a bit lower than the 870P or the SPAS-12, shotgun ‘feels’ quite a bit more accurate – and with its’ nice rate of fire (for a pump-action), this beauty quickly became a Personal Favourite to run with. **

M4 (Criminals) = With a nice rate of fire and decent damage, this cannon is quickly becoming a Personal Favourite. **

KSG12 (Cops) = Although a pump-action shotgun, this thing hits like a horse’s hoof to the head – I dubbed this cannon the “Kiss The Ground” shotgun right away. **

1887 = Although powerful, this old-west-style shotgun shoots slow – when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

DOUBLE-BARREL SHOTGUN = A true source of unearthly power once unlocked, the DOUBLE-BARRELLED SHOTGUN will make you feel like a living angel of death, as even one barrel’s worth will end an enemy close by; just point this finger of god at an enemy and say “die” – and as long as they aren’t too far away – they will do it for you. Worth the effort to Unlock and a Personal Favourite. **

SA-58 OSW = I call this “The Recoil Machine”, as unless you fire one bullet at a time, you will be covered in rifle Recoil.

SCAR-H (Cops) = This silence-able machine gun has some recoil, but it “levels out” and can be compensated for, allowing you to enjoy the high damage output and decent accuracy (especially if ‘tap-shooting’ for short bursts). *

FAL (Criminals) = Although this rifle has a fair amount of recoil, it seems to have high damage output – if it can be compensated for, this could be a nice heavy-hitting weapon to run with. **

HCAR (Cops) = With a medium amount of recoil, it “levels out” and can be compensated for, allowing you to enjoy the high damage output and decent accuracy (even during continuous fire, if you can control the muzzle). **

HK51 (Criminals) = Although it has a bit of recoil, this silence-able rifle has a nice ‘smooth’ feel to it. **

SG510 (Cops) = With a nice feeling of accuracy (aimed fire, with recoil compensated for) it also feels like a decently-hard-hitting weapon – this could be a new Personal Favourite for me. *

M39 EMR = With a little less accuracy than the other Battle Rifles, the M39 EMR ‘feels’ a bit smoother though, with a nice rate of fire and the ability to be silenced – it’s just too bad it doesn’t have Extended Magazines available, as it always feels like it’s running out of ammo just a tad too soon. *

M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).

Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **

RO933 BLK = [N/A, Haven’t Unlocked Yet, sorry]

AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

MAMMOTH GUN = [N/A, Haven’t Unlocked Yet, sorry]



SYNDICATE GUN = [N/A, Haven’t Unlocked Yet, sorry]

A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

45T = This pistol doesn’t seem to do much damage, nor does it shoot very fast – but that slow rate of fire gives it decent accuracy.

.40 PRO (Criminals) = While this pistol is decently accurate, it only does mediocre damage and it doesn’t fire very fast – another enemy will probably kill you before the one you are shooting at dies, unless you ‘get the drop on them’.

M1911A1 (Cops) = While it doesn’t shoot very fast or do above medium-ish damage, this WWII-era pistol seems to be decently accurate – but it will win no awards.

BALD EAGLE = With huge damage output, this ‘Hand Cannon’ will feel like you are wielding a hand-size shotgun – too bad it can’t be silenced or have longer scopes put on it. *

T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

MP5K = Fast-shooting and if you can compensate for the recoil, pretty accurate – it even works great silenced. *

M/45 (Cops) = Not as ‘smooth’ handling as the MP5K, this SMG feels ever-so-slightly more accurate and has decent damage, to boot. *

MPX (Cops) = A fast-shooting and fun smg to run with, it seems to have a little less recoil than the other SMGs but doesn’t ‘feel’ as accurate, if that makes any sense – it is still pretty good and if you are able to compensate for recoil, a nice gun to use. *

K10 (Cops) = Insanely insane with an insane firing rate, it has been literally only for the insane since the Beta – and maybe those who don’t like keeping bullets in their gun – heaven help anyone if you point this at their head. **

FMG9 = Suppress-able at 90 kills, this fast-shooting SMG ‘feels’ more accurate than its’ kindred, especially after unlocking the Laser Sight and some Scopes – and with a unique stock animation, it is a ‘fun’ weapon to run with. *

M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

SCORPION = A fast-shooting gun (almost as fast as the K10 it seems), this silence-able fella ‘feels’ ever-so-slightly less maneuverable than its’ brethren – and it does a bit less damage, too – otherwise, it would have been a Personal Favourite (I have almost unlocked the Suppressor already on it). *

Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

UMP45 (Criminals) = Although slightly more accurate feeling, it also feels like it shoots slower and hurts a little less than similar weapons.

UMP9 = Silence-able after 70 kills, this SMG ‘feels’ a little bulky to wield, but seems like it does a notch more damage than its’ counterparts. *

UZI (Criminals) = Silence-able but unfortunately “The Uzi” in-game seems different than it does in the movies – it shoots far slower than on the big screen, but it is also more accurate here. *

M5 NAVY (Cops) = Making you feel like you’re in your own 80’s movie, the M5 NAVY packs a punch and seems to keep accuracy even out to mid-ranges (aimed or not) – quickly making this a Personal Favourite. **

M12S (Cops) = “The Spaghetti Uzi” ‘feels’ ‘clunky’ and a ‘bit’ ‘inaccurate’ to me, ‘but’ it seems to have a ‘few more’ bullets than ‘similar weapons’, which ‘mostly’ ‘makes up for it’, quote marks. *

AUG PARA (Criminals) = While this Criminal-only SMG ‘feels’ like it does decent damage and is fairly accurate, it ends up being only ‘mediocre’ in… well.. Everything.

MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them, until it shows up on the Kill Log… **

MX4 = Although very ‘average’ in all stats in-game, the stylish MX4 ‘feels’ like it is an efficient damage-wielding gun that is fun to use for some reason – I just kept on using it, eventually unlocking almost everything I wanted in each Attachment category, despite losing many shootouts with it.

M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).

RO933 .300 BLK = [N/A, Haven’t Unlocked yet sorry]

M110K5 = [N/A, Haven’t Unlocked yet sorry]

1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.


MAMMOTH GUN = [N/A, Haven’t Unlocked yet sorry]


SYNDICATE GUN = [N/A, Haven’t Unlocked yet sorry]

A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

.38 SNUB = Seen in almost any cop movie between 1970 and 1990, this little guy fires fast, ‘moves’ smoothly and is nice and accurate – but it better be because you only get five shots to work with – and there are hardly any add-ons for it at all. *

.44 MAGNUM (Criminals) = The Classic is here, from Movies to Real Life mayhem, the “fourty-four” is a hand cannon of damage to all it gets pointed at, nuff’ said. *

.410 JURY = While not the fastest firing, this little bad boy is literally a hand-size-shotgun (it fires small shotgun-style shells) and since it is smaller than the Fourty-Four and The Eagle – but seems to blast out the damage even out to close-to-medium ranges – this weapon is fun-as-hell to run with. A Personal Favourite. **

.357 RS (Cops) = While still a “magnum” like The Fourty-Four, it doesn’t seem to do quite as much damage – or have the range the .44 MAGNUM has – but it has a bit more ammo at 8 rounds.

T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

R0933 = With a high rate-of-fire and equipped with a few little add-ons ‘out of the box’, the RO933 ‘feels’ smooth and easy-to-use, even if it isn’t the fastest killer. *

AKS74U (Criminals) = With a notch up in damage and a couple notches up in accuracy from the RO933, the AKS74U ‘just feels right’. **

G36C (Cops) = Having not seen a “G36C” myself since BF3, this felt like it’s ‘little brother’ – a ‘smooth’ to maneuver with, compact, pretty accurate gun. *

SG553 (Cops) = With the highest average in-game stats than the other Carbines, this weapon should “kick criminal butt” – and that, it does (especially with some Add-ons). A Personal Favourite.**

CAR-556 = Packing a wallop of hit damage and feeling pretty accurate, even at range in short bursts, I have no idea why I can’t ‘get into’ using this gun more – perhaps it is the ‘harsh’ sound it makes? LOL *

ACWR = While the in-game stats show it as fairly inaccurate, I found the ACWR to do decent damage, ‘feel’ smooth to use – and do a nice bit of hurt to the enemy (even at range if you can compensate for the bit of recoil). *

AKM (Criminals) = If you can deal with the huge amount of recoil this gun has, it does seem to have a pretty accurate, crazy-damage, first shot and high-damage short bursts – other than that, it is actually ‘average’ in all stats, in-game.

M16A3 (Cops) = Accurate and with a fast firing rate, silence-able and reminiscent of “movie M16s”, there isn’t much to not like about this weapon. A Personal Favourite. **

M416 (Criminals) = This carbine ‘feels’ like it handles a lot smoother than the AKM, feeling more accurate as well, even though the in-game stats are comparable.

ARM = [N/A, Haven’t Unlocked Yet, sorry]

L85A2 = With a bit of recoil already, it is accentuated by the pre-loaded 4X scope it comes with – but if you are just ‘runnin-and-gunnin’ with it, it feels like a formidable weapon up close – it just seems to have accuracy problems (bullet spread) at anything other than point blank range.

MDC (Cops) = With what seems like a high amount of recoil and inaccuracy, the MDC doesn’t seem to live up to its’ stylish look – it ‘feels’ a bit worse than the L85A2, in regards to ‘handling’.

FAMAS = While quite inaccurate if you just ‘spray-n-pray’, aiming seems to help a lot with this rifle – it ‘felt’ a lot better too, after Unlocking the Extended Magazine – and it seems like it could only improve from there.

F2000 (Criminals) = This huge wall of metal feels like you are carrying a rocket launcher, but with its’ fast firing rate and decent accuracy, there’s not much to dislike about it – other than it doesn’t seem to ‘hit’ as hard as I would have expected . *

SAR-21 = In-game, the stats on this weapon are very ‘average’ – and it ‘felt’ that way, except for the accuracy which, especially if you can compensate for it, seems ‘high’, actually – and it only seemed to get better as I Unlocked more Attachments. *

RPK (Criminals) = With a large magazine size (50) and how this gun ‘feels’ heavy-hitting, while a bit inaccurate at first, I think it can be a formidable weapon after some Unlocks.

RPK-74 = While comparable to the RPK (of course), the ‘74 ‘felt’ a little more accurate, actually. *

AUG A3 = The AUG A3 already ‘felt’ pretty accurate, but with ‘included’ 4X scope and if you can compensate for the recoil, it is a pleasure to shoot – too bad it doesn’t seem to do high damage (but about a ‘medium’ amount). *

M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **


M110K5 = [N/A, Haven’t Unlocked Yet, sorry]



1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

MAMMOTH GUN = [N/A, Haven’t Unlocked Yet, sorry]



SYNDICATE GUN = [N/A, Haven’t Unlocked Yet, sorry]

A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

92FS = Silence-able but not the fastest-shooting pistol, nor the most damaging – it does seem accurate though, if you can compensate for the recoil – maybe it would become something worthwhile after some Unlocks.

P226 (Cops) = Although fairly fast-firing, it is somewhat inaccurate – I would say it is the ‘slightly faster but less accurate version of the Criminals-only CZ-75’ if I had to compare it.

CZ-75 (Criminals) = Although fairly accurate, it is somewhat slow-firing – I would say it is the ‘slightly slower but more accurate version of the Cops-only P226’ if I had to compare it.

G17 = Nicely accurate and firing as fast as you can click, it seems, the G17 became an instant Personal Favourite. **

FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever (other than the red dot sight it comes with). **

T62 CEW = Only one word for this one-hit-disabling “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

M67 FRAG = With decent range, ‘The Poison Apple’ does huge damage – I think it’s killzone has been increased since Beta – a room-clearer (as long as they are in line-of-sight), but you only get one. *

M18 SMOKE = While it doesn’t damage anyone, it does provide some good ‘cover’, as it blocks not only seeing people but also spotting.

M84 FLASHBANG = While sounding very useful at first, with the faster pace and highly mobile opponents in the convoluted spaces of Hardline, having an effect with this is rare – although I have had it used on me and have seen people not able to see well for the short time it is in effect (looking around or shooting aimlessly) – it is very rare to be helpful it seems, but it happens.

GAS GRENADE = Quite useful, as it blurs the view of the enemy (affecting their aim as well) and sometimes a killer (albeit slowly) – unless you want to be affected yourself, put on a Gas Mask Gadget. **

INCENDIARY GRENADE (Cops) = Create your own “Napalm Pond” with this grenade-of-fire, which has a good range and good ‘spread’ (the area of effect is fairly big) – the only drawback is that people have to stay in it for a bit to die and some could have Fire Resistance Masks to nullify it (but that is only the Operator Class and only if they have the Robbery Expansion/DLC). *

MOLOTOV (Criminals) = The ‘homemade’ version of the Incendiary Grenade, it has the same area of effect and does the same damage, it seems – and could be nullified by the FR Mask (but as above, that is only the Operators and only if they have the right Expansion/DLC). *

THROWING KNIFE = Slightly slower to deploy and slower to travel than expected, these types of knives are fairly heavy [in real life, I used to own one when I was younger] so they have some drop to account for; but your opponent will die when one knocks them over, making these little guys fun as heck to use. **

BASEBALL BAT (Criminals?) = No matter where you grew up in the world, you will know how to wield a wooden stick – which means this guy can come out fast and keep on swingin’ – do it from behind for a Takedown. *

POLICE BATON (Cops) = A staple of Authority worldwide and resembling the Japanese ‘Tonfa’, this bad boy will knock out a perp in two hits if you don’t take him down from behind. **

NIGHTSTICK (Cops) = Like a Police Baton without the little handle, the Nightstick feels fast to use, if a bit mundane to look at.

BLACKJACK (Cops) = Although still small and slim, this little guy feels ever-so-slightly slower than the other ‘sticks’, for some reason.

COLLAPSIBLE BATON (Cops) = I had no idea there would be such a long delay to deploy this little fella, since he’s so short…but don’t worry he becomes longer.

SHOVEL = As a farming tool, I feel that it has a sufficiently-long delay time to whip-it-out… and that’s enough double entendre for now.

GOLD CLUB (Criminals?) = Feeling like it wields ever-so-slightly slower than say, a baton or bat, it is still wicked fast – and you can do a non-lethal takedown (from behind), to Interrogate the enemy (finding out their positions on the map). *

LEAD PIPE (Criminals?) = Quick to draw and with a somewhat-satisfying ‘clunk’ when you hit an opponent, this guy is fast becoming a Personal Favourite. *

SLEDGE HAMMER (Criminals) = Slow and heavy to draw, this baby packs a mean punch once it does show its’ presence on the battlefield – a one-hit kill, it also takes down doors and crumbles thin walls with ease. *

BREACHING HAMMER (Cops) = The lawful version of a Sledgehammer, this big boy is also slow and heavy – but it forces others to ‘respect your authoritah’ once drawn as it one-hit-kills and takes down doors and thin walls with ease. *

CROWBAR (Criminals?) = If you’ve lived in any industrialized country for a time, you know what a crowbar is and what it can do – and while not seeming quite as quick-to-deploy as say, a bat or a baton, the muffled ‘donk’ sound it emits when hitting someone makes this weapon a pleasure to work with. **

KNIFE = Fast and deadly, nuff’ said.

SHANK = A weapon born out of necessity, the Shank is fast and deadly and other speedy and dangerous words… you get the point – or rather, they will. *

BOWIE KNIFE = This classic weapon, interestingly named after an owner (not its designer) feels ever-so-slightly slower than its’ other bladed brethren.

CARBON FIBER = Although sleek and stylish looking, there is an ever-so-slight delay to deploy this bad boy – but it does seem to have a unique takedown animation that can happen.

SCOUT = A fast knife that will cover your hands in blood if repeatedly wielded in a cluster of enemies.

SEAL = It feels ever-so-slightly slower than say, the Scout Knife, but it is still ‘wicked bad’, as it should be.

SURVIVAL = With an animation similar to the Bowie from the back and a seemingly-unique kill animation from above [that I have seen so far], this knife works well, even if it does seem ever-so-slightly slower than the other knives, for some reason.

TRENCH = With a ‘side animation’ similar to the Shank and a ‘front animation’ similar to the Bowie [that I have seen so far], the look of this fella makes it a touch more satisfying to kill with. *

ACB-90 (Criminals?) = With side-killing animations similar to the Shank and rear-killing animations similar to the Bowie [that I have seen so far], it does seem to deploy pretty quickly. *

DEVIL’S TOOTHPICK = The motions for using this ‘asylum invention’ on people are more ‘hectic’ and seem to shout “mayhem” (you stab less and hack more, it appears).

FIRE AXE (Cops?) = Live out your Team Fortress 2 “killing people who make W+M1 jokes” Pyro urges, or perhaps your childhood dream of being a “Firemans” (or a “Firelady”) with this slow-to-wield but ‘kick-axe’, axe. *

MACHETE = This traditional and practical knife seems to deploy quite slowly – although it does great damage and appears to kill in one hit [so far].

CLEAVER = While not as slow to use as say, the Machete or Axe, it is still “medium-slow”, a lethal takedown (even from behind) – but it doesn’t seem to have any ‘unique’ animations [that I have seen so far].

KARAMBIT = Fast and Deadly, there really is nothing else to say about this ‘little devil’ other than those two words – really, I’m not just being lazy here. *

INQUISITION SWORD = Slow and Heavy to wield – but a one hit kill as you overpower your foe – be sure to shout “There Can Be Only One” in real life when you use it for maximum fun-ness. **

When the Betrayal Expansion was released in March of 2016, a Battlelog Post stated: “Now that various weapons have been released to all classes with the base game update, you can pair a Mechanic with a sniper rifle, or an Enforcer with an SMG. You might not be as effective as you would with your class weapon, but the option is there.” Meaning, if you are utilizing a Weapon that is normally ‘outside’ of your Class, you will be using it with reduced effects!

Again, as stated above, I would like to do the Gadgets (Class Special Tools) as well, sometime in the future – but for now, enjoy these little summaries of the Main Weapons available, to give you an idea of them if you are a newer player, or to help you in finding something that fits your playstyle (eg. ‘slow and hard-hitting’ or perhaps ‘fast-shooting with lighter damage’, and so on) – hopefully this information will help you out in some way. Enjoy – get in there for the Double XP Event on now – and See You In The Game!

Preparing for a Paperless Year!

I am in full-blown pre-planning mode. We officially reported back to school on Thursday, and I’ll have 27 fourth grade students in my classroom on August 1. It’s crazy to think about how fast this summer has gone and how much work is still ahead.

This will be the first year that I will attempt to go paperless from day 1. Last year, we only had 1:1 iPads for the last 6 weeks of school, so it was after we had established many of our routines and procedures for the year. As I prepare for this shift, I’m linking up with the Tune into Technology linky to share my plans for management and organization.

Managing the Students

1. Number the technology
I assign students numbers 1-27 on the first day of school. We use these numbers for everything — mailboxes, book bins, lining up, etc. We’ll also use them for the iPads. Each student will be assigned the iPad corresponding with their number, so they’ll always know which one to use and which slot to put it back in when we clean up.

2. Build Classroom Norms and Routines
We’ll develop some essential agreements about the iPads before we even get them out. I’ll let the students decide on the rules, with a little extra guidance as necessary. The items that we’ll need to touch on will include:

  • how to get the iPad out of the cart
  • moving around the classroom with the iPad
  • using the iPad appropriately (following directions, etc.)
  • putting the iPad away
You can read my previous posts on this here and here.

3. Develop a common vocabulary for the buttons and gestures, and teach some basic actions.

We’ll talk about the different buttons on the iPad and their functions. We’ll also talk about how they can be used together to take screenshots and quickly navigate from one app to the next. For more information about how I do this, check out my TpT freebie (the very first thing I ever made for TpT!).

4. Give time to explore
The first writing assignment my students will have this year will be to write an informational piece (either descriptive or how-to) about an app of their choosing. By giving them this assignment, I’m giving them time to play around with the iPad and explore the available apps while also getting a baseline writing sample. This has the added benefit of cultivating “experts” about the different apps among the students.

We actually start school on a Thursday this year, and I intend to get all of this started during those first two days.

Organizing Myself

As I prepare for my paperless year, there are a few items I’m working on before the students even arrive. This will help me be ready to go on day #1.

1. Create a stack of Evernote notebooks for all of my students.

I’m planning to keep all of my conferring notes, work samples, and other relevant data in Evernote this year. To prepare for that, I’ve created an Evernote notebook for each student, and I have them clustered together in a “stack” so that all of my homeroom students are together.
Since I anticipate using this system for many years, I’m formatting the notebook names as “2013 – Last name, First name.” That way, I won’t get confused when I’m quickly looking for the notebooks for this year’s students as opposed to last year’s. I’ve also created one additional notebook called “2013-2014 Overview.” Listing both years ensures that the notebook will be on top of my stack when they’re sorted alphabetically, and I’ll use this notebook to keep track of notes and documents that pertain to the whole class. 
You can read more about setting up Evernote notebooks in my paperless series.
2. Create a checklist template for my class.

This will also be done in Evernote.

I like to have a checklist of my class roster available whenever I’m collecting forms or tracking important information. I’ll make a blank checklist now, and then I can copy and paste it into future notes as needed. This is a huge time-saver down the road for me.

3. Make sure that my Dropbox folders are set up for distributing student work.


Although there are plenty of learning management systems available, I strongly prefer Dropbox for distributing assignments to students just because it’s so easy on my end. All I had to do was create a folder titled “Student Assignments.”

Once the daily folders are set up within the Student Assignments folder, I can share all of the folders through a link on my class website, and students can easily access everything they’ll need for daily assignments. To read a complete step-by-step tutorial for how to do this, check out my previous post.

Since I set this up at the end of last year, all I needed to do was empty out the assignments I gave to last year’s class so that I can start fresh this year.

4. Create a class on Class Dojo.


Class Dojo is an excellent online classroom management app that I’ll be utilizing more this year. I’ll tell you more about how I’m integrating it with my classroom economy in a future post, but for now, all I need to do is input my student roster and print out home access codes for my students and their parents. Then it will be all set to go.

5. Create a new group on Edmodo and prepare a welcome message.

(Edmodo has totally changed its app icon, btw. Check it out!)

I’ll be using Edmodo to collect student assignments, give quizzes, conduct class discussions, and take polls. I’ll need to have a group code ready to give students for the first day so they can sign up, and I’ll want them to have something to see and do immediately when they log in for the first time.

****
Once I finish these 5 steps, I think I’ll be ready to start the year. I have to admit, I find prepping for a paperless classroom far easier than what I experienced in the past. I’m looking forward to going on this journey with my students this year, and I can’t wait to share all of the learning we’ll have in store for us. It’s going to be a fantastic school year!

Can’t wait to read about how others are organizing and managing technology in their classrooms. Be sure to check out the other posts in the Tune into Technology linky, and have a great week!

And More: Deals and Sales – Black Friday Weekend 2013 Deals Are On Now


I don’t usually talk about current sales/promotions on this site [or haven’t so far], but after seeing all of the sales on out there, I had to make a quick post just to say that there are some great deals on now! 

Even if you don’t live in the United States (for instance, I’m in Canada [eh]) you can still take advantage of them, as most electronics and entertainment companies are on the Black Friday/Cyber Monday weekend bandwagon, with tons of purchases available online – and it’s all “nuthin’ but good” for gamers… Steam, Origin, Gamefly and other digital gaming distribution platforms are all chock full of great sales, as is Amazon, TigerDirect, MemoryExpress and other local and online hardware stores, allowing you to finally get that Upgrade you’ve been wanting, should you decide to jump on a deal out there.

Some examples of games on sale are below; but whether you buy a few games this weekend or save your money and just play with the new influx of players in your own favourite online game – I hope you enjoy your weekend and have some fun:

An example of the Black Friday Weekend Sales for 2013 on Steam

A small example of the Black Friday Weekend Sales for 2013 on Origin

An example of the Black Friday Weekend Sales for 2013 on Gamefly

See You In The Games!

a friendly stopped by to say hello, at 5000 feet

The video shows a man flying calmly, when suddenly a military fighter appears out of nowhere. After quickly moving the wings up and down in greeting, the plane disappears from the sky at a speed worthy of a video game or a movie

My Trip to Thailand

When traveling east from Sri Lanka I generally travel through Thailand and transit in Bangkok. However I rarely get an opportunity to meet the people on the road as I am in a rush of checking in and out of hotels and flights. In April I was in Bangkok for a training assignment and had the opportunity to interact with people in Bangkok. I enjoyed the interaction with shop keepers and street vendors. However, I saw a significant difference in the pulse of the ordinary people. There was a more tense feeling with quite a high degree of uncertainty given the political situation in Thailand. Even though the current Prime Minister has promised to hold elections the majority of the Thais feel that the Army has started a war along the Cambodian boarder to postpone or effectively suspend the constitution again.

The fight between the “old traditional Thai power base” and the “modern Thai power base” led by Thaksim. Some of the expatriates I met seem to think that Thailand is getting into a situation or a case of “Thailand having an Army that owns the country”; something similar to Pakistan. The Army seems to have a great say in the lives of the Thai people and the politicians.

Thailand still remains a polite and friendly place to visit, however it seems to have shot itself in the foot regarding the tremendous progress it had made in the economic and democratic frontiers. As I come from a country that has seen decades of civil war I hope that sanity will prevail and the Thai people can sort out their differences and get ahead.

Paperless Mission #9: Setting Up Your Class with Evernote

This is the ninth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #9: Set Up Your Class with Evernote

Today’s mission assumes that your class has easy access to technology. I teach in a 1:1 iPad setting, but I realize how blessed I am to have this and how few people — especially at the elementary level — get to do this. For those of you who have less access to classroom technology, I’m including modifications that you’ll be able to use at the end of the article.

It’s been a couple months since I started drinking the Evernote Kool-Aid, and I’m still loving it. I don’t have to worry about losing papers or information, and it has become my repository for just about everything. For the first time in my professional live, I feel like I’m getting a handle on organization. But then I see this:

And I’m reminded that just because I’m organized, doesn’t mean that my students are. In fact, all year long my fourth graders have been struggling with keeping track of class notes, transporting work between home and school, and remembering what materials to use to study for tests and quizzes. Part of that unquestionably comes with the age and maturity levels of 10-year-olds, but given how awesome technology has become, I knew there had to be a better way.

Enter student Evernote accounts. My students used Evernote on their iPads for the last 6 weeks of school, and I’ve been very pleased with the results. Here’s how we set it up.

Step #1: Register for new Evernote accounts.

This step can be done on either a computer or an iPad. (My pics will show the iPad view.) Students will need to have an email address in order to complete registration, but this can be tricky with students who are under the age of 13 since many of the students don’t have email yet. One work around that we found was to set up a class email address on Gmail (ex: [email protected]). Then, you can add the “+”symbol to the end of the username along with a string of letters and/or numbers before the “@gmail.com” ending. Evernote thinks all of these are different addresses, but Gmail doesn’t pay attention to anything after the “+” symbol, so everything will go back to the “fakeeberopolis” account. This lets students register without ever giving them an email address.

I had students put their lunch account numbers after the plus symbol, but names or other number combinations would work too. You just have to have the info after the “+” symbol be unique to each student so Evernote doesn’t think they’ve already registered. 

I let the students choose their own usernames and passwords, and I had them record those in a safe place so they could share them with parents. Next year, I’m likely to collect the information as well so I can easily help the students recover it. They don’t sign in and out of Evernote usually — they just stay logged in, so many of them forget.

Step #2: Build Notebooks for the Subject Areas

My students created notebooks for Reading, Writing, Word Study, Math, Science, and Social Studies. They later added notebooks for their Spanish and Music classes. During the set-up phase, we talked about the differences between notebooks and notes and how to move notes from one notebook to another. Next year, when I start this from the beginning of the year, we’ll also talk a lot about tagging notes to make them easier to find.
 

Why Student Evernote Notebooks Rock

1. More instructional time because transitions are so easy. Transitions between subjects used to take us forever because students would forget to grab a notebook or not have all the materials ready on time. Now transitions are just a quick stretch or brain break. They have all of their notes right in front of them already. We’re abandoning the cluttered bins and drawers.

2. Students are more accountable and prepared. We don’t have to worry about forgetting work at home or getting lost between home and school. It’s all in one place. In addition, students are able to create more comprehensive class notes. If we read an article using GoodReader, students can save it to their Evernote notebook. If we develop an anchor chart as a class, students can take a picture of it and add it to their notes to refer back to long after it’s gone from the classroom display. If they make a model of different types of triangles using toothpicks, they can photograph their work and add in captions later. More learning gets archived than we’d ever accomplish with a paper model.

3. Everything is portable between home and school. Students don’t get to take their iPads home, but as long as they save their work in Evernote, they can access it from any computer or mobile device. It also means that students aren’t leaving important readings or materials at school when they need to study for a test. I’ve had many frustrated parents complain that their child wasn’t bringing home the right materials to review for tests this year — especially because we don’t use traditional textbooks at my school — and this remedies all of that.

Another portability example is that I’ve also had students use Evernote as a word processor when they’re working on longer writing assignments because they can pick up their work between home and school. (In the future, I’d like to use Google Drive as their word processor, but until we get there as a school, this is an acceptable alternative.) Once students are ready to turn in a finished piece of writing, they copy and paste it into Pages, clean up the formatting, and turn it in through Edmodo. It has worked brilliantly this term, and I’m seeing much longer, more developed pieces of writing at all stages of the writing process now. I really think the ease of this process has played a role.

Now that we’re using Evernote regularly in the classroom, I can’t imagine ever going back. While I will miss the massive influx of office supplies (composition books, notebooks, etc) at the start of the next school year, I’m falling in love with the fact that the only things I take home with me each night are my laptop and iPad. Going paperless has been a glorious thing.

What are some ways you could use Evernote with your students? I’d love to hear about it in the comments section!

High-quality protein continue…

Soya’s starring role

Soya is another star player on the protein front, and although it doesn’t have as high a BV as whey protein, meat, fish or eggs, it has a multitude of health benefits which more than justify its inclusion in a low-carb diet; and it is a great vegetarian option.

Soya contains all-important isoflavones, which can reduce insulin levels, decrease arteriosclerosis (thickening of the arterial walls) and lower levels of LDL (Low-Density Lipoproteins, or poor cholesterol). It has also been shown to reduce the risk of osteoporosis (softening of the bones), increase bone mass and enhance the body’s ability to retain calcium.

Diet Start

Soya is also of particular benefit to women, as the isoflavones it contains mimic the action of the female sex hormone oestrogen. It is believed that a diet high in soya can reduce the density of breast tissue, therefore lowering the risk of developing breast cancer.

Make it organic

The quality of the meat and fish we consume has dropped dramatically during the last century. Gone are the days when we were eating meat that came from animals allowed to graze freely on nutritious grass, and fish caught inunpolluted rivers and seas. Today, most farm animals are fed on grains that are high in carbohydrates and omega-6 fatty acids, then pumped full of antibiotics and hormones. And fish are being farmed in restrictive conditions, rendering them more fatty than their wild counterparts.

The only real answer is to buy the best that you can afford – the organic option being the healthiest and most nutritious. Organic is better because the quality of the food is better. It isn’t loaded with drugs and hormones, isallowed to graze naturally, and quite often comes from wild sources, so that the level of omega-3’s is higher, levels of saturated fats lower.

Protein Q&A

Q. Where does whey come from?

A, Whey comes from milk. During the process of turning milk into cheese, the whey protein is separated from the curds.

Q. Why use whey?

A. It contains the perfect combination of amino acids, in just the right concentrations for optimal performance in the body. Both hormonal and cellular responses seem to be greatly enhanced by whey supplementation. If you are trying to increase muscle mass, whey protein is invaluable in building and retaining muscle tissue.

Q. How do I know how much protein I need?

A. Easy-just follow these simple calculations. If you are sedentary you need 0.8g protein per kilogram of bodyweight (0.36g per pound of bodyweight). If you are active, you need 1.4g protein per kilogram of bodyweight (0.64g per pound of bodyweight). So a woman weighing 63kg (1401b) who exercises needs 88.2g of protein per day. A woman weighing 63kg (140Ib) who isn’t active would be fine on 50.4g of protein per day.

Q. Can I have all my protein in one meal?

A. No, it is best to spread it out over the day, so divide it between your three meals and two snacks. You can do this by having eggs at breakfast, a portion of nuts for your morning snack, some fish at lunchtime, a whey protein shake as an afternoon snack, and finally by including a piece of lean meat in your evening meal.

Managing the Work/Rest Ratio in HIIT Training

High Intensity Interval Training aka HIIT training is all the rage and there are many different HIIT training protocols available, but to produce the best results it is important to understand how to manipulate the Work/Rest Ratio.    The Work/Rest Ratio is the ratio of time spent working in the high intensity interval to the time spent in the recovery interval and there is no one ideal Work/Rest Ratio. In fact there are three distinct methods you can use to design interval training programs based on how you manipulate the Work/Rest Ratio.
Fixed Work, Fixed Recovery
This is the most common method and often used for group training because it keeps everyone working together.   In this method the amount of time spent in the work phase is fixed as is the amount of time in the recovery phase.   For example the ever popular “Tabata” Protocol is a fixed work, fixed recovery protocol using 20 seconds of work and 10 seconds of recovery done 8 times.    Another example is the Sprint 8 protocol which uses 30 seconds of work and 90 seconds of recovery.  In addition, all MX4 programming uses this method either for a 60/30 work/rest ratio or a 4 to 1 Minute Work to Rest Ratio during Density Workouts.
Needless to say there are endless variations of fixed work, fixed recovery interval protocols and each one feels different and allows for a different level of relative intensity.    The advantage of these type of protocols is that they are very simple to design and very easy to track using a simple timer, and if using heart rate monitoring you can adjust the actual work intensity and recovery intensity based on individual heart rate response.   Also this is a very easy way for a trainer to manage a group as mentioned previously.
Fixed Work, Variable Recovery
In this method the amount of time spent working is fixed, but recovery time varies based on heart rate response.  This method is a more individualized way to do HIIT training where each work interval begins after the heart rate slows to a predetermined point correlated with a specific level of individual recovery.  The advantage of this method is it can be customized to each person based on their goal, age and current fitness level.   An example would be doing a 1 minute work interval with a fit 20 year old and setting the recovery threshold at say 120 beats per minute (a relatively low exercise heart rate for a fit 20 year old).  So he would work as hard as he can for 1 minute then go into recovery and stay in recovery until his heart rate slows to 120 beats per minute.
Variable Work, Variable Recovery
This method varies work time AND recovery time based on preset work heart rates and recovery heart rates.   For example using the same example of a fit 20 year old you might set a goal work heart rate threshold at 180 beats per minute – meaning that you keep him working hard until his heart rate hits this work threshold and then immediately begin recovery.    Then you would keep him at a reduced work rate until he hit a predetermined recovery heart rate threshold such as 120 beats per minute.    This is a highly sophisticated and highly individualized way of exercising with precise management of work and rest customized to the individual.
Have some fun and experiment with each of these to prevent plateaus in your workout progress!

Hello, 2015!

Another year is in the books, and as always, I’m excited to be seeing the start of a new year. Last year will be remembered for its big highs and deep lows, but I know that everything happens for a reason, and I feel like I’m in a good place to start 2015.

And one place I plan to start is being a better blogger! So here’s my Currently post for January 2015.

Listening – It’s my daughter’s bedtime here, and my husband has bedtime duty tonight. It’s a rare moment when the TV is off, the dogs are asleep, and all is quiet in the house. I’m savoring it.

Loving – I think that New Year’s Day may be my favorite day of the year because it is a fresh start where it feels like anything is possible. I often feel this way at the beginning of the school year, too, but I think I prefer this time of year because there’s more predictability with everything. I already know my students very well; we’ve built our routines and expectations, and the only things that need to be changed are the things I *want* to change. It’s an empowering holiday.

Thinking – A major reason why I haven’t been blogging much lately is because of my Ph.D. program. It feels weird to be writing something that doesn’t have a lengthy bibliography attached to it! I continue to be excited about my dissertation topic, though, and I’ve been thinking about it more and more. I plan to write about the role of social media in teacher professional learning. The short version is that I’m going to study how reading and writing about classroom practices through blogging affects teachers’ feelings of effectiveness in the classroom (self-efficacy beliefs). I think connecting with other teachers through blogging and other social media has been one of the best moves I’ve ever made as a teacher, and I’m curious to find out if others feel the same way and what consequences it might have. One of my classes this semester is actually requiring me to blog about my research, so I’ll be setting that up in the next week. It will be a separate blog as I doubt my classmates in other programs will really want to read about Eberopolis, but I’ll share a link here if you’re interested in following or learning more.

Wanting – I had 18 blog posts in 2014. Pathetic. I have a notebook full of ideas, so now I need to get them out here. My goal is to blog at least once a week, and as I’ve been getting other things in my life better organized, I think that’s realistic.

Needing – I set some big goals for this vacation as far as getting myself organized for the new year, and so far, I’ve done a great job. For example, I already have 2 months of healthy meals planned for my family (written on sticky notes so I can shuffle them around when stuff inevitably comes up).

And I’ve been cleaning closets and creating a new workspace to boost my productivity in the new year. I even made my annual pilgrimage to The Container Store today! I just need to wrap up my remaining projects tomorrow so I can enjoy my weekend before returning to school on Monday. (I’m @eberopolis on Instagram if you want to see more about those projects…). 
Finally, my three areas:
YES to my health. I lost nearly 20 pounds between Labor Day and Christmas, and while my trip to see my family for the holidays reversed that trend a little, I’d like to continue to focus on my health in 2015. I’ve been doing Weight Watchers, and losing weight has been easy when I’ve taken the time to plan what I’m going to eat and track what I eat throughout the day. I’m ready to get back on track.
Maybe to becoming a morning person. I already get to work by 7:15 each morning, but I would hardly call myself a morning person. I read The Miracle Morning by Hal Elrod over break, and it has me thinking about whether I should try to get up earlier to add things like meditation and exercise to my morning routines. I’m thinking I’ll try it for a month and see how it goes. (The book was good, btw. An easy read to be sure). 
I wish…I love my job–I really do–but I’m starting to feel like it’s time for me to tackle a new challenge. I want to be able to work with other teachers to help them troubleshoot issues in their classrooms, improve their teaching, and use technology more effectively. I purposefully chose to go into an Educational Leadership PhD program for that reason; ultimately I want to teach in higher ed and/or become an administrator. I’m not ready to do all of that yet, but I wish that I could find an instructional coaching position or something similar that would let me work more directly with teachers while I keep working on my program. It might be time to start that hunt this year. 
Okay, I promise I will be back soon…I have a couple of other posts in draft mode almost ready to share about some of the new things I’ve been doing in my classroom this year. Hopefully you’ll FLIP when you read them! 😉
Happy new year!

Workout Anytime in Citizen Tribune

Workout Anytime in Citizen Tribune

WORKOUT ANYTIME was recently featured in the Citizen Tribune. The article explains the newest WORKOUT ANYTIME location coming to Morristown, Tennessee this October. It gives background on Steve James and Scott Elliot and how they came about the WORKOUT ANYTIME brand. The article also goes into further detail on the services at the gym and the owners planned community outreach.
You can view the full article here. 

It’s Not Just You™: AMD’s Crimson Drivers, Radeon ReLive Not Working At First [Possible Fix]

Just a quick post before I go to bed here, that I wanted to share about the AMD Crimson Drivers that I got notified about just a bit ago, which included AMD’s “ReLive”, their new Game [and Desktop] Recording utility – ‘built-in’ to their 16.12 Drivers… For those who couldn’t get it working right away (I see posts about it already in the Official AMD Forums), I couldn’t either… And although I eventually did, I wanted to let others know, if you are having issues with it: It’s Not Just You™

I was already starting to get tired when I saw a notification of the Driver Update – and I had no idea there was a nifty Game Recording ‘app’ incoming with it [I haven’t been reading much lately, I have another Cold for pete’s sake!]. For AMD GPU owners, waiting patiently to see if AMD was going to come out with their own Game Recording utility – it’s here! The future is now!

Check out AMD’s Video on their ReLive edition of Radeon here: 
https://www.youtube.com/watch?v=nRSm12lwRe4

[I really wanted to start Testing it all out tonight, running Benchmarks and collecting Data for a TestRun or a Quality Test with it; but my sleepyness is actually building and getting the better of me, so I better go soon – I wanted to share what I did this evening though, to get it working (for me), before I go…]


Without going over the few things I tried first that didn’t work (setting configuration, testing with different games, etc), here’s the steps to take that finally got it running, for me:

  • Download the Latest AMD Drivers via their main Website (http://support.amd.com/)
  • Uninstall the main AMD Drivers via the Control Panel > Programs > Uninstall/Change Program
  • Reboot
  • Install AMD Drivers via the Download from their Website
  • Reboot

That’s it!

After that, even though I have a 200 Series* AMD GPU at the time of this writing**, I was able to get ReLive up and running, even playing a little bit with the configuration and making a couple of short test recordings, before I came here to write this quick ‘tip’ of what might help get it going for others… It’s a larger ‘step’ (messing with Drivers, as opposed to just messing with Configuration/Settings); but I always like to Troubleshoot from the smallest steps first (eg. changing some settings) to larger steps (eg. re-installing software) to huge steps (eg. OS reinstallation, hardware changes). Thankfully, it started working just fine after only a bit of a ‘larger step’ taken.


Although with the most recent versions of Windows you don’t always have to Reboot it when making changes, it helps to get everything ‘in order’ in the background, re-initializing all hardware and Drivers fully – which is why many installers/software still get you to do it through their installation programs.

I plan on putting the Game Recorder through it’s paces, working on a TestRun and a QualityTest, to come in the future here at The Blog – for now though, hopefully ReLive can get up and working for you, too – good luck, and if you are having troubles with it, remember – It’s Not Just You™!

* The AMD page on ReLive at their main website (http://www.amd.com/en-us/innovations/software-technologies/radeon-software/gaming/radeon-relive) shows only 400 Series GPUs as ‘Officially Compatible’. Although it does not state ‘it will not work with earlier Series’, it is unknown 100% at this time if it is possible, hence my mentioning it above

** Disclaimer and Personal Veracity Statement: Although I currently own an AMD GPU, I have owned NVIDIA GPUs in the past and will do so in the future. I have no personal preference between the two, purchasing one or the other as Upgrades depending on my needs at the time and my financial limitations at the time I choose to Upgrade. I have not and will not receive any compensation for mentioning or talking about either companies’ products. I am merely an enthusiastic user (of both).

How to Create a Lower Body Band Training System

Resistance training bands provide a great strength curve that matches the lower body strength curves nicely.   Specifically, the more you stretch a band the higher the level of resistance you have to overcome.   In the case of the key lower body movements such as squats, deadlifts and lunges this matches the strength curve of these key movements meaning that the muscles are capable of producing the highest levels of force at the top of the movement when joints are extended and muscles in their shortest position.
The trick is how to apply band resistance to these movements and other functional movements such as jumps.  While there are many different techniques for accomplishing it – one of the best is to create your own lower body band loading system using a large band as a belt and smaller band/s looped through it and onto your feet to create load from the hips down.

This system puts no load on the spine,  and it is easy to increase or decrease load based on band sizes used and number of times you wrap the band around your feet.
It travels with you as you move for extra load for all lower body movements including squats, lunges, and deadlifts.    It is also a portable jump training system that is easy to create, and for facilities with the reACT Trainer it is a fantastic way to create additional overload on the reACT Trainer while keep the hands free!

Click here to see step by step instructions for how to use bands for this set-up:   https://www.youtube.com/watch?v=zkAMGtjkVm4

The 2017 Extra Life 24-Hour Gaming Marathon, In Support of The Children’s Miracle Network Hospitals [Post Updated All Weekend]

Wow, it’s that time again – time to try to play some games for a cause – in my case, I play as much as I can through the weekend for the Alberta Children’s Hospital Foundation (as I was born and raised in the province of Alberta, Canada).

This year actually ‘sprung up’ on me, as I haven’t been feeling well these past few weeks… I have had a bit of a fever [38C/100F+]  the entire time and have been extra sore and slow (I say ‘extra’ as I myself have a condition, called Myalgic Encephalomyelitis – which is basically an infection of the brain and spine that causes Fibromyalgia and Chronic Fatigue symptoms (pain and tiredness, respectively) – a condition I have had for 12 years now [wow it’s been that long]). So, playing for this charity every year is special to me and something I have tried to do every since I heard of Extra Life back in 2015.

Image Link to The Extra Life main website, where you can see all of the other wonderful people participating in this event, many of them streaming their marathon Live on Twitch and other streaming sites! (Link opens in a new window)

Due to my own illness then, I cannot play 24 hours straight through, but I count my gaming hours Playing For The Kids™ over the entire weekend of the event (in this years’ case, Saturday November 4th and Sunday November 5th), hopefully tallying 24 hours in total.. (in the case that I am not ‘up to it’ for that long, I allow myself to count my wife’s gaming time, as she generously tries to play beside me and add hours, for a “Total Household Hours” amount). [I always hope that in the spirit of the event and the intention, that my dear readers and those at Extra Life find this acceptable]

As has occurred in past years, I do not have the ability/energy to set up and maintain a constant Stream of some sort yet (through Twitch, YouTube and other streaming services); but what I do is I share some details and Screenshots (and Videos if I can) of what I am able to play, here at The Blog, in an ongoing and updated post – one that I will be adding to as the weekend progresses (including Sunday Night), right here!

So, follow along with me as I Play For The Kids™ all weekend, updating this very post as I go – and if you wish to take part, you can Pledge/Donate directly to the Extra Life charity via the Logo/Image just below or through this link for 2017: https://www.extra-life.org/participant/247989 – and whether you pledge anything or not, feel free to just return to this posting for gameplay time Updates, Screenshots, some Video Clips from the weekend – and more!

See You In The Game!

Update, Saturday 12:30PM MST: Beginning The Marathon, with the initial post above and gathering snacks and drinks to start Playing For The Kids™!

Update, Saturday 7:30 PM MST: As usual with this event, I always try to play some good’ol Minecraft Hardcore Mode (you only get one life!), to see how far I can get during the marathon.

Usually, I don’t get too far and starting out this year was no exception. I spawned in a new Hardcore world – in a wintery biome which I found out later was “Cold Taiga” – which meant, although there were plenty of Trees for Wood to use, there were no seeds to find and plant right away for food, there were no large hills in sight (for easy access to Stone and Coal to cook any foods I might come across) except in the far distance – and as night fell, I died right away to a band of two skeletons and a zombie that came out from behind one of the many, many trees…. Wow what a harsh start!

I began another Hardcore world, hoping to spawn in a relatively easier biome – and I did… I quickly collected Seeds from the Grass around me and began a Garden to grow Wheat RIGHT AWAY, heh. I had to cull some of the many Pigs I found around me in order to eat, planning on replenishing their numbers later on. I then carved out a little Mud Hut in the hillside nearby and settled in for the night…

Updates on that World as I play more – but for now I have to stop and take another break. More to come!

Total Gameplay Time: ~2.0 hrs

Update, Sunday 10:30 AM MST: I played last night right up until I fell asleep, starting a “Just One Life™” character in Fallout 4 (where I stop playing and delete that character upon dying just once), and was popping into various games for short periods of time, like Marvel Heroes (which has Daily Login Rewards, with small ‘gifts’ every few days you enter the game – and a Free Hero available at the no doubt-difficult-to-get-to, Day 300) [Even if I do not have the energy to play for a while, I try to pop in to register a login, heh – to see how far I can go].

I also popped into The Elder Scrolls: Legends, a Virtual Collectible Card Game based on The Elder Scrolls series [a good game for slow-paced-yet-still-kinda-flashy-and-enjoyable gameplay that you can play against the CPU/AI only, if you desire to]. I also ran a few Benchmarks and did a few quick driving tests in Grand Theft Auto V, trying out some settings I saw in YouTube videos online (to see if I get the same framerate with the same hardware) – but I felt a bit weird at the concept of playing GTA games for this Event [shouldn’t I be playing games kids would play, or at least Family-Friendly games? lol], so I didn’t stay in Los Santos very long.
Today, I plan on playing as much as I can, continuing my Minecraft: Hardcore Mode world, and my Fallout 4 “Just One Life™” character, along with some Elder Scrolls Online gameplay, hoping to get up to 24 hours in Total. I’ll also post more Screenshots next Update. Here I go!
Total Gameplay Time: ~ 5.0 hrs


Update, Monday 9:30 AM MST: Well I played as much as I could… 
In Minecraft, I continued my Hardcore Mode world (actually Marathon 2017 World 2.0, as I died without even leaving the first Biome in the first one (above)), making a nice Garden along the shore of a River nearby…
When night fell upon the world, since I was out on a ‘walkabout’, looking around the Biome, I quickly dug into the nearest hill, making myself a small mudhut house to Craft and Cook in… I should have maybe stayed in it all night, but I thought I would get started on collecting more Food, by killing a few Spiders and using their silk to make String, crafting a Fishing Pole.. And what happened? Two Skeletons came out from behind a tree and as I ran back toward my little ‘second mud hut’, they cornered me and filled me full of arrows, as I weakly flailed my Rock Sword back and forth… I hope my ‘Deeds Will Be Remembered’ [hehe Diablo2]
To make myself feel better, I popped in an out of a few games for the next few hours… I tried out Need for Speed: Most Wanted, which seemed like an open-world racing game, with good graphics.
Playing that game reminded me of a ‘test’ I wanted to do (I love running Benchmarks and Tests, heh) with Grand Theft Auto Five (GTAV), where I saw a video of someone running it on High Settings, to test out the differences between how it performed on two different CPUs (Processors, referring to the ‘main engines’ of a computer). So I started up GTAV and ran the Benchmark (to see if I got similar results) and drove around the city a bit.
While the game looked good, I felt a little weird playing such a ‘mature’ game during a Marathon for children’s charities [lol shouldn’t I be playing ‘family friendly games’? or does it matter?], so I just took a few Screenshots (of course), and then left it for now, for something else.

The Beta for Paladins, a MOBA-slash-FPS game by the makers of Tribes:Ascend and Smite, was going on, so I popped into that game, going through the Training and playing for a while afterward.


Total Gameplay Time: ~ 10.0 hrs

Alas, just like before, I couldn’t quite make the 24 Hours on my own… My own illness [where I am sore a lot and get tired easily] keeps me from playing for very long at one time. However, as I stated earlier, what I like to do, is include the game playing time that My Better Half does alongside me, as part of a “Household Total”… If I include her generous contribution, the new total becomes:

Total Household Time: ~23.0 hrs


Haha – even with her inclusion, I did not ‘quite’ make the 24 Hours in total… But, as stated above, I hope that in the spirit of the Marathon and its’ intention – and mine – I hope that what did accrue would be acceptable… In fact; I do not think that ‘total game time’ is the main goal of this Marathon… This time is perhaps to literally ‘take time’, to think about those that are much more unfortunate than us, and in the case of this Charity, much younger than most of us… During this Day or Weekend, whichever it is, I think, we remember those out there, those that are in need. In this spirit/state-of-mind; I thank you Dear Reader, for following along in this small adventure. Whether you donated at all or not, I hope that you played a little bit of some game, took a little bit of time, to think about those that are in much more pain and need than most of us are. And I thank you for following me on this small journey. Take care, my unmet friend – and perhaps See You In The Game.

Teenager’s Room Rockstar Design For Real RockStar

Design of this room is reserved for your child who likes to play music and have a dream to be a rockstar. where in this room like rockstar there are some tools to play music, like a music studio in the bedroom. with a very attractive color design coupled with music playing equipment such as guitar, drums and other. expected to design the rooms in such a way to make your child feel more comfortable at home and hone his ability in terms of playing music

Teenager’s Room Rockstar or Musician Themed

Teenager’s Room Rockstar or Musician Themed

Teenager’s Room Rockstar Design For Real RockStar

Teenager’s Room Rockstar Design For Real RockStar

Teenager’s Room Rockstar or Musician Design

Teenager’s Room Rockstar or Musician Design

Knoxville News Sentinel featuring Kurt and April Nitzsche

Knoxville News Sentinel featured WORKOUT ANYTIME owners Kurt and April Nitzsche.
The online article includes a great picture of April showing one of her clients, how to use one of many exercise machines at the Maryville location. The story also ran in the print edition on the front page of the business section with a large two picture spread of Kurt and April.
April Nitzsche explains to Robert Ridenour how to use one of many exercise machines at the Workout Anytime in Maryville on Thursday, January 16, 2014. April and her husband Kurt Nitzsche are the franchise owners of the Workout Anytime in Bearden and are now expanding into Maryville with their second location.         (SAUL YOUNG/NEWS SENTINEL)
You can view the online article here. 

And More: The EULA Keeps Popping Up When Starting Sony’s Vegas Video Editing Applications (FIX)

Since the most popular answer on the ongoing poll I have running here at the blog (“what type of posts would you like to see more of in 2014” [top right, it will run until the middle of the year]) is “Tips And Tricks Of Video Capturing And Editing”, I thought I would start more of these types of requested posts by sharing this fix for a problem that seems to pop up intermittently with Sony’s Vegas line of products.

Whether you have just re-installed it or whether it has been on your system for a while, ‘something’ is causing the EULA (End User License Agreement) to pop up and require you to agree to it, even if you have already done so and/or Registered the program. This question comes up once in a while on the Sony Creative Software Official Forums and I have seen it elsewhere. I was recently reminded of it again because it is also something that just happened to me on my system! I didn’t re-install Vegas or make any large changes related to Vegas, yet this little guy started popping-up every time I started up Vegas Movie Studio HD**:

The popup that comes up for some people, every time they start Vegas

The fix is a simple one, originally suggested by a Sony Forum Moderator and quoted/forwarded frequently on the official forums, to those who come and ask the question there. Although it seems more like a ‘workaround’ than a ‘fix [in my opinion], it works just fine and since it is officially supported by Sony and I just tested it for verification myself [that it does indeed solve the problem], so now I share it here with you:

  • To stop the EULA popping up every time you start Sony Vegas, simply open Windows Explorer and navigate to the folder where you installed it on your system. 
  • Then, find the file that is titled, simply, “eula”. There will be no Extension showing, even if you have the Windows option to ‘Hide Extensions For Known File Types’ turned off. 
  • Rename (or delete) the file. That’s it! 

Now the EULA cannot pop up anymore and won’t, every time you start up Vegas to edit your game captures.

**Although this example shows steps for the Movie Studio version of Sony’s Vegas Video editing line, the EULA ‘fix’ is the same steps for Vegas Pro, Vegas Edit or other versions of Vegas

Enjoy popup-free video editing once again – and See You In The Games!

My Trip to Bangladesh June 2011

The assignment in Bangladesh is to evaluate the performance of a department within an organization. The interesting aspect is that the objective / mission of the department is, Organization Development of its other departments as well as partners of the organization. It’s going to be an interesting assignment. This will be a long assignment where I will be staying for 4 weeks in Bangladesh and travel to the north of the country.
The journey here was uneventful and arrived at my hotel tired but happy to be here. I am staying at the Asia Pacific Blossom Hotel; http://www.blossomhotel.net/ this will be my second stay at this hotel. I stayed at this hotel in 2006 during my first assignment in Bangladesh.
The assignment itself got off to a tuff start as the day of the launch of the assignment was a “Strike Day” in Bangladesh and apparently there are more strike days planned in the coming weeks. I am no stranger to Strikes / Harthal in Bangladesh and was in the thick of them when I was here on assignments in 2006 and 2008. At least this time it’s in support of oil and gas committee on the ConocoPhillips deal. The once planed during the week is for political issues; these tend to get violent and can be dangerous.

WORKOUT ANYTIME on CNN Money

WORKOUT ANYTIME on CNN Money in an article titled, “What’s next for Blockbuster’s empty stores.”  The article gives information about the recent announcement that Blockbuster will be closing their remaining locations, and how this benefits franchises looking for real estate in growth markets. WORKOUT ANYTIME is featured at the beginning of the article with info about WORKOUT ANYTIMEopening 20 locations in former Blockbusters and looking to open more. Randy is quoted about why the locations are ideal and how easy it is for them to convert the real estate. Jeff is quoted about the great location and how easy it is to tell members of the community where to find the gym. The article also states that WORKOUT ANYTIME is looking for more Blockbuster stores to convert to WORKOUTANYTIME locations.  Click here for the entire article or begin below.

What’s next for Blockbuster’s empty stores
By: Patrick deHahn

Blockbuster’s closing signals the end of an era, but it also means there’s a lot of retail space to fill.

Last week, Blockbuster announced plans to shutter its remaining 300 U.S. locations. It was the final nail in the coffin of a steadily declining brand, which was bought by Dish Network (DISH, Fortune 500) in 2010 after the retailer went bankrupt.

(Read More)

BEDROOM INSPIRATION DESIGN STYLE AWUTAN

Bedroom Inspiration Design

Bedroom Inspiration series today, I decided to post some new designs that room I found in my daily online surfing. Here are the last 5 new chamber design that come in our bedroom inspiration series, now at number 7 If you want more inspiration room, you can start from here and keep the links in these posts.

Bedroom Inspiration Style

Bedroom Inspiration Modif

Bedroom Inspiration Awutan

Bedroom Inspiration Mantrap

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

Hülsta German Furniture Maker showed some really incredible ideas of life that may be adopted by the style-conscious people who want to give their house a futuristic look and ergonomic. The perfect blend of stylish design with bright pink and black give the whole to create a very refreshing, but a look of the space age. The leather was added to an authentic touch and royal with a minimalist effect adding to the “cool factor”. You can either go all black look metallic or deliberately throwing red and white, while maintaining the class and elegance.

LIVING ROOM LAYOUTZ FROM HÜLSTA

LIVING ROOM LAYOUTZ FROM HÜLSTA

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

DESIGN ROOM HOTEL LE ROYAL MONCEAU

DESIGN ROOM HOTEL LE ROYAL MONCEAU

DESIGN ROOM HOTEL LE ROYAL MONCEAU

Parisian palace since 1928, the hotel Le Royal Monceau offers a revival directed masterfully by Philippe Starck Different! Parisian palace Since 1928, The Hotel Royal Monceau Dining Room Offers revival has masterfully directed by Philippe Starck Different! It is the feeling that one can have by browsing the different areas of the vast Royal Monceau A desire a little crazy and infinitely poetic break with custom, to avoid chokepoints, to welcome the shift, and while cherishing the precision and perfection, displaying a fondness for the panache and daring, fantasy and excess It Is The Feeling That One Can Have by browsing The Different Areas Of The Will to VAST Royal Monceau sample christmas tree decoration and Slightly Crazy With infinitely poetic break custom, to Avoid chokepoints, to Welcome the shift, and while cherishing The precision and perfection, displaying a fondness pour la panache and daring, fantasy and excess.

37 Avenue Hoche, 08. 37 Avenue Hoche, 08. Champs Elysees, 75008 Paris Champs Elysees, 75008 Paris

My trip to New Delhi & Hyderabad Cont……..

I finished the 5th and final OCA for this assignment. The organization assessed is rather a small one but with a track record of substantial outputs. The 3rd organization Indian Institute of Dalit Studies, the 4th organization Yugantra (www.yugantra.org.in) and the 5th organization Institute of Social Studies Trust (www.isst-india.org) had fewer economists as researchers than the 1st and 2nd organizations assessed. This resulted in their research being more focused on the softer aspects of development such as gender, education and inclusion. This meant that they had more interactions with civil society organizations. In a country that is looking to grow at 8% on an annual basis it is good to have this perspective brought in to the policy making process.

I finished the OCA by 4 PM and made my way to he airport to take the flight back to Colombo. To my surprise the flight was on time and we were able to board and are ready for take off on time. I dreamt of sleeping in the plane and getting home at a decent hour and taking a shower and going to sleep so that I can start a new day in Colombo without the effects of travel. This however was not to be. As the air stewardess counted the passengers there was one passenger missing. This meant that the airport staff had to look for this idiot all over the airport. As they could not find him then they decided to offload him; so this meant that they had to offload his baggage as well. As the Delhi airport did not have a bar coding system that meant that all the baggage had to be manually processed to identify the missing passengers’ baggage. This took one and a half hours.

Apparently the passenger was a phantom as he has been checked in (as part of a group) transferring to this flight with his luggage but he was physically not there. I hope they throw the book at the counter staff that did this horrendous mistake. And fix the system to ensure that transfer baggage is not loaded on to the aircraft until the passenger physically checks in. I really thought that this type of kinks in the system would have been sorted out long time ago; apparently not.

So what promised to be a nice ride back to Colombo turned out to be the longest flight between New Delhi and Colombo. The silver lining is of course that we arrived safely!

Have to finish all my reports for the India assignment and apply for my Philippines visa next week as I have to leave for Bangladesh on the 24th of March.

And More: “An Internal Error Occurred When Overlapped Buffer Is Full” in VideoStudio X10 [Error Workaround]

[This post is currently Text-Only for speed of Posting. I may return and add example Screenshots and more, Soon™]


Update 2017-05-02: While not a ‘Fix’ for this issue, I have done more testing and found what is essentially the issue

Go to “Update 2017-05-02


Just a quick bit of information, for those using Corel’s VideoStudio X10 to edit and render their video projects and running into this error…

I was working on trying to finish some of the many, many, many projects I have in various stages of completion, and ran into an odd error when trying to render a Project in VideoStudio X10. The error said only:


“An Internal Error Occurred When Overlapped Buffer Is Full”


This is somewhat odd, as this is more of a generic Windows Application error than it is a VS (VideoStudio) error. So, I went to the Official Corel Support Forums and did other online searching…






I found a lot of people who have experienced this error, but none that had any solutions, sadly.
So, it was Time To Go Troubleshooting! /maskandcape

Now initially, I was trying to render in 1080p using the more common MPEG-4 Part 10 (h.264/AVC) format. VSx10 offers GPU-acceleration (where it utilizes the power of the videocard), like many video editing programs do these days, to help render and compress the output – and the quality of MPEG-4 can be quite good for the size, when it comes to compression.

BOOM, the error pops up, interrupting the rendering process.
Okay, time to see what could be causing it.

First, I tried to render in the other Formats that VSx10 offered (MPEG2, WMV, etc) and nothing would finish rendering without this error – except for Windows Media Video format (WMV).

Since WMV does not require GPU-acceleration to render, I disabled all GPU-powered optimization in the Preferences of the application (disabling ‘hardware acceleration’ where I could). I was hoping this would render with other formats without acceleration (MPEG-4 does not ‘require’ hardware acceleration, for example, but it renders much faster with it). Still, the error came up in any other format than WMV…

So, to dig in a bit of a different hole than the WMV format to find answers, I took out all elements of the Project except for the first video files (taking out the audio files, the Text added, images, etc) and tried to render again. It worked!

I then added in the Text elements (made with Corel’s built-in Title tools). It worked!

Since it worked with Text and all video files now, I added in the Audio Files.

BOOM, the error popped up again.
That’s okay, it’s progress – now we know that something related to the Audio is having troubles.

I was looking at the Audio Files and noticed that I had some ‘Audio Filters’ and ‘Speed/Time-Lapse’ adjustments on them (to help them synchronize somewhat in the Project), so I took those effects out and tried to render again. It worked!

Okay, so since it works with the Audio Files present – without ‘FX’ on them – then it might have something to do with the Filtering/effects…
I enabled only the Speed/Time-Lapse adjustments and left out the Audio Filters for the Audio Files that utilized them. It worked!
I then enabled the Audio Filters again and BOOM, the error reared up and roared in my face.

So, it appears that there may be something with the Audio Filters in VideoStudio that does not play nicely when you go to render the Project (for those experiencing this problem..). Nothing but WMV would produce output for me, at the time of this posting (this is with VideoStudio X10 Service Pack 1).


My advice then, is to try to utilize audio files that do not require Audio Filters in VSx10, for now (until the source of this problem is fixed in full).


If you must apply some sort of affects or filtering, there are many audio editing tools out there that can be used, at least until this gets looked at/fixed someday. Some suggestions off the top of my head are:

  • Sony’s Sound Forge (recently acquired by MAGIX, I think).
    This is a pretty capable application, with lots of effects, pitch shifting, fading and filtering available – I have used it a lot in the past when it was run by Sony. It costs some money, however.
  • Audacity.
    This is a free (Open Source) audio editing application that is popular and has many of the features and filters that Sound Forge has – I have used this too, before I could afford to buy any editors at all.
  • Adobe Audition.
    Adobe acquired the older-but-popular Cool Edit Pro audio editing program, which I personally used to use and like. I have not used it since Adobe took over, so I cannot vouch for how this one is – I assume that it is similar to how CEP was – which was quite capable. It is not free, however.


For now then, I will bring this up with Corel Support and see what they have to say about it – until this gets ‘fixed’, avoid utilizing Audio Filters in VideoStudio, if you can – for now…


Hopefully this information will be of use to those who, like me, were running into this annoying error in an otherwise decent video editing application – and hopefully it gets fixed soon!


If I remember, I will come back and Update this Post when a ‘Fix’ has been released!



Update 2017-05-02: While not a ‘Fix’ for this issue, I have done more testing and found what is essentially the issue with Corel’s VideoStudio x10 and how it handles some Audio formats (sample rate / bit depth). I am in contact with Corel Support at this time via e-mail, discussing this issue.




Here is what I have found after further testing:


I did some further testing on the audio files, looking at their specific properties. 
I found that the files giving this error were in 24bit depth, 96000Hz format. 

Just to experiment/investigate, I converted the audio file to 16bit depth, 44000Hz format (Standard Compact Disc Audio WAVeform format) and it worked! 

Here is what I found then, during more testing on the bit depth:

– 16bit audio file = Audio Filters and Speed Adjustment can both be used at the same time
– 24bit audio file = Only one or the other can be used at a time

Both Audio Filter and Speed Adjustment added = Error with 24bit audio file at 96000Hz sample rate
(I found that the 24bit depth audio files were also 96000Hz..)

Testing 24bit audio files at 44000Hz resulted in NO ERROR = it worked
(when using both an Audio Filter and a Speed Adjustment at the same time)

The error was repeatable however, with a 96kHz 24bit audio source file (having both a ‘trouble’ Audio Filter (one of those three listed above) and a Speed Adjustment on it).

Although this is not a ‘game breaking’ issue (I personally don’t mind converting any of my 24bit audio source files that are at 96kHz into 16bit depth versions but it is more work), this may be an issue for more novice users, who may not know how to do so. 
[Hmm, maybe I will make a Quick Tip on this, to help those people out…]

Related to this, many commercially available Samples (sound source files) are distributed to the customer as 24bit audio files, for higher fidelity. 
(Example: I purchased Sample Packs from Sony Creative Software and they came in a bundle as 24bit audio files. Another purchased Pack from BigFishAudio also had the source files being delivered as 24bit sources)
If any of those are at 96kHz (I see that most are at 44kHz anyway…), then it may bring up this issue. 

I realize too that it may be my machine, or my specific combination of hardware, interacting (CPU/Sound/etc) and also there does not seem to be many 96kHz 24bit audio files floating around in general usage (from what little I have seen, perhaps there are, but as I stated above, commercially-purchased packs seem to come in 44kHz 24bit format, at most).

Although this is not a ‘Fix’ directly dear readers, hopefully this information can help you VideoStudio users to avoid it, ‘stepping around it’ at least, for now – and perhaps this testing and information can even be utilized improve VideoStudio for the future… (I am in contact with their Support now, discussing these occurrences).






[Note: I am not affiliated with Corel or any of the other companies mentioned herein. I have not and I will not receive any compensation of any kind, for mentioning VideoStudio here. I am merely a user of the product and have used many of the other products mentioned above, including other video editing programs, not omitting Open Source / Free applications. I simply share information I have discovered, in hopes that it will help others.]

Quick Tip: Fallout 4 – “Get Rid Of Someone You Don’t Like” in Your Settlement (Without Killing Them or Using Cheats) [Suggestion, Text-Only Mode]

Just wanted to share something that came up, in answering a Question someone asked in the Official Steam Forum for Fallout 4 – in case anyone has a Settler in one of their bases that they really, really don’t like…

A person asked in the Forum, how to ‘get rid of’ Jezebel‘, whom for those who do not know, is a Robo-Brain type automatron, from the Automatron Official DLC. Without getting into any Spoilers, I’ll just say “she has an attitude”…

However, because she is a Resident of your Settlement, you cannot easily get rid of her, as attempting to just kill her will set all of the other Settlers gunning for your head in retaliation/defense.

Also, although she can be Assigned to the Task of, say running a Shop at the far end of Town and ‘stay there’, she is not of much use in that respect – because Robots cannot run Shops/Stores [sadly].

I thought of using her to start a Supply Line (so her Task/Job will take her out of town almost all of the time and you’ll rarely ever have to see her) – and saw that another helpful Fallout 4 player thought of the same thing – and already posted it as a Reply in the Discussion…

Still, I could add (as a Tip perhaps); that you can ‘send her away’ even more so by first Moving her to a Settlement that you rarely go to (using the MOVE menu bar command, at the bottom of the Workshop Mode interface).

You could Move her to Oberon Station perhaps, or The Slog [those are where I normally send ‘people I don’t like’ lol] – anywhere that you normally don’t ‘check up on’ as much as you do your other Settlements…

Then, after that, Assign her to become a Provisioner and start up a Supply Line (using the SUPPLY LINE menu bar command, in Workshop Mode) between the starting place of where you sent her (“far away”) and another place you rarely go to – that way, you will REALLY never have to see her again!

[Actually, you may still run into her, as you run into your Provisioners if you journey into the paths between the Settlements you have Supply Lines set up for – but still, if you pick two remote places that you don’t really visit often as her Supply Line nodes (start and end points), then you’ll really rarely ever bump into her]

Either way, I hope these ideas help any of you ‘get rid of someone’ you don’t like, from a Settlement (and you don’t want to kill them or use cheats/commands to do it). Have fun in Fallout 4!

Popcorn Cart, Warren, Ohio, circa early 1910s

https://www.facebook.com/neatoldphotos.m.lucas2/photos/a.400823796751664.1073741829.400758923424818/908779272622778/?type=3

Becoming a GI Joe

All carbohydrates have a value on what is known as the `glycaemic index’ (GI), which indicates how quickly that carbohydrate is metabolized by the body and converted into glucose. The lower a food’s GI, the longer it takes to be converted. Foods with the highest GIs are the ones that will have the most profound and immediate effect on your blood-sugar levels. All the carbohydrates on a weight- loss and insulin-balancing regime should come from the lower ranges.

There are two indexes: the glucose standard, which rates glucose as having a GI of 100 and the white bread standard, which is based on white bread being equal to 100. Other carbohydrates are assigned comparative ratios based on these figures. It doesn’t really matter which index you adhere to, for they both give a pretty good – and sometimes surprising – insight into the speed with which certain carbohydrates are assimilated into the bloodstream.

Diet Start

Below are a few GI values of common foods, based on the glucose standard. Of course you are not expected to remember each specific food’s value, so to make things easier, opposite are two simple tables showing you how to classify fruit and vegetables into those with a low GI value (under 20), those with a medium value (20-60) and those with a high value (over 60).

Density values

Each carbohydrate can also be evaluated by its density value. This is the amount of usable carbohydrate in relation to fibre and water content – the more fibre and water a vegetable or fruit contains, the less usable carbohydrates it will have. The most dense carbohydrate foods are pulses, wholegrains and starchy vegetables, particularly when they are cooked and their fibre is broken down, these will raise your insulin levels, so always be aware of this. The table opposite contains a list of low-density carbohydrates that should form the basis of your carb intake on a low-carb diet.

Not only do many fruits feature highly on the GI scale, but a few should also carry a carbohydrate density warning sign. Bananas, dried fruit and concentrated fruit juices are all a bad idea if you are trying to balance your blood sugar levels. It is best to avoid these totally until your blood sugar and weight have normalized, and then carefully re-introduce them into your diet.

Focus on fibrous vegetables that can be eaten raw or steamed – the type that lose a lot of water whilst cooking. This will mean increasing your intake of leafy green vegetables, such as Swiss chard, green cabbage, kale, bok choy, rocket, spinach and endive.

Game Recording with MPEG-4: using H.264/AVC in Programs such as Dxtory, Bandicam and MSI’s Afterburner (Text-Only, Long Version)


This article is a Text-Only version, showing how to use a few programs (one of them completely free) to utilize this efficient codec in game recording, using steps and settings that I personally found optimized performance and showing which ones slowed things down when recording. 
For a video example of how to set the x264/AVC codec recordings to be editable in
Sony’s Vegas or Adobe’s Premiere video editing applications, see my post about it here:
http://gametipsandmore.blogspot.ca/2013/06/and-more-how-to-record-with.html

The MPEG-4 video codec has been around for over a decade now. I remember recording TV shows to watch later on, on a system with an ATI All-In-Wonder videocard (back when videocards had only 8MB of VRAM!) and the joy of the changes I was seeing, going from compressing the shows in MPEG-2 format to MPEG-4 using either Quicktime or DivX (or it’s open-source competitor, XviD). Smaller file sizes and still decent quality? Awesome. Those were MPEG-4 Part 2 or ASP (Advanced Simple Profile) iterations of MPEG-4. Today, we are up to MPEG-4 Part 10 or AVC (Advanced Video Coding) and great times are to be had by all who record their video game adventures, as modern hardware and capturing apps allow not only for h.264/AVC to be used for video compression and archiving – it can also be used for small filesize ‘live’ game recordings and great retainment of detail, if desired.

Dxtory, Bandicam and MSI Afterburner all provide the ability to utilize the various codecs installed on your system to record with (others do as well, I am merely choosing these more popular game recording apps as examples). To record with MPEG-4/h.264/AVC, it is simply a matter of installing that codec on your computer [if it isn’t already], then choosing it inside of whichever game recording app you prefer. The codec’s interface (GUI, Graphical User Interface) will allow you to change whatever settings you wish – but these settings will be quite different from what you may be used to, if you have done any h.264/AVC video compression in the past. Why?

Because we are going to be balancing the settings – not just for retaining quality at a small file size (as you would like to when archiving a movie to keep on your computer) – but now also for recording speed. For instance, if we try to set things for high compression and attempt to keep detail at the same time (as we would for archiving a movie), it simply takes too long to process and compress the changes between frames ‘on-the-fly’ and save them into a file, when attempting to record game output. This would result in the game ‘lagging’ and dropping frames to try and keep up, as it falls behind dealing with analyzing and compressing and then writing the data, resulting in a video with ‘choppy’ playback as well. So, when recording our gameplay ‘live’, we must now consider the various settings and their affect on how fast we can put through the processing of frames and writing it to a file at the same time.

I will be addressing most of the settings in the h.264/AVC codec, but not all of them. I will be concerned mainly with the ones that will slow down processing, so that things do not take too long and fall behind and cause ‘lag’, both in the game and the resulting video file itself. This differs from compressing for archiving our own movies, because instead of being only concerned with Quality (setting everything on ‘high’ and letting it take as long as it needs), we must now balance Speed of the compression as well, being now more concerned with each of these settings and how they can possibly slow things down when recording the ‘live’ game rendering. As is the nature of live recording, we want it to easily and quickly process the frames and save them to a file. I will explain how to do all of this.

Recording with H.264/AVC

“x.264” is a free/open-source utilization of the h.264/AVC codec (the XiWave GNU GPL MPEG-4 Codec). It is normally a command-line driven executable [when you run it, you type things in, to get it to do things], so what we want for game recording with these programs, is a version with an ‘interface’ so that we can just tell our apps what to do with the mouse and buttons/sliders and it translates it into commands for the codec. All we would have to do is choose a few settings and checkboxes (what most people are used to – a nice, easy, graphical user interface).


Doing a search for ‘x264+windows’, there are a few places you can get the installer/setup program for x264 and Windows, here are the main ones:

This is the “Official” Open-Source Video For Windows version of the x264 codec (Red Logo) at the time of this writing:
http://sourceforge.net/projects/x264vfw/

This official codec is what is covered in the “Easymode” sections of this article


This is an “Unofficial” x264 Video For Windows Codec (Black Logo), at the time of this post, that allows for far more settings to be edited via checkboxes and pulldown menubars, but is more difficult to use (these two links are both the same thing):
http://www.digital-digest.com/software/x264_VFW_Codec.html
http://komisar.gin.by/index.html

This unofficial codec is what is covered in the “Hardmode” sections of this article


Basically, you can see that what we want is a “Video For Windows” version, which (thanks to all those great people that have worked on it over time!) has a nice, easy-to-use interface for picking the settings you want to use, without typing in a long line of commands every time. After installing the codec/interface into Windows, it’s just a matter of opening whatever game recording program you prefer and selecting it to use it.

Here’s how to select it for usage in these three game recording programs:

Recording with x264 and Bandicam

  • Once the codec is installed, run Bandicam and go to the Video tab and click on the Settings button
  • In here, under the Video category, next to Codec, click on the pull-down menu bar (with a little triangle at the end) and choose External Codec, which allows you to use other codecs installed in your system
  • Then, click on the three ellipsis (““) button and it will let you “Select external video codec”
  • Select the “x264vfw” H.264/MPEG-4 AVC codec from the list and click on the Configure button
  • This is the x264vfw configuration interface and in here are all the settings we will talk about next…

Recording with x264 and Dxtory

  • Once everything is installed (Dxtory requires dotNET 4.0, a download link is on their main Download page), run Dxtory and click on the Movie settings button (which shows a little handy-cam with it’s lcd screen hanging out the side)
  • Under the Video Codec category, next to the word Codec, click the pull-down menu bar (with a little triangle at the end) and choose “x264vfw” H.264/MPEG-4 AVC Codec from the list and click on the little pen icon/button to the right, which opens the Configuration dialog box of the codec
  • This is the x264vfw configuration interface and in here are all the settings we will talk about next…

Recording with x264 and MSI Afterburner

  • Once the codec is installed, run MSI Afterburner and click on the Settings button at the bottom 
  • In here, go to the Video Capture tab and under the Video Capture Properties category, click on the pull-down menu bar (with a little triangle at the end) and choose “VFW compression”, which allows you to use the other codecs installed in your system
  • Then, click on the three ellipsis (““) button and under Compressor, click on the pull-down menu bar (with the little black triangle at the end) and choose “x264vfw” H.264/AVC codec from the list and then click on the Configure button to the right
  • This is the x264vfw configuration interface and in here are all the settings we will talk about next…
» Note:  To record with x264/h264/AVC and have it easily-importable and recognized properly in NLE’s (Non-Linear video Editing applications, such as Sony’s Vegas and Adobe’s Premiere lines of products [for example]) without having glitches or corruption or other problems, one setting for MPEG-4 codecs must be changed from the Default Setting right from the start. I created a video example of how to change this setting in Bandicam, Dxtory and MSI’s Afterburner and the post with that video can be found here at this blog:
http://gametipsandmore.blogspot.ca/2013/06/and-more-how-to-record-with.html
To understand some of the concepts and settings utilized by this codec (and helpful information to know for game recording and video compression in general), a quick word on Bitrate:

[This section is highlighted in green headings for navigation, to assist you whether you are re-reading this article or you feel you know a lot about bitrate in video editing and wish to skip it]

Bitrate (in Layman’s Terms)  /start

When talking about game recording, bitrate is an expression of the amount of data we are using to create the recorded file [literally, how many bits of information we are using]. It is usually expressed as how much information per second we are telling the codec to use, to represent the frames that are getting pushed through, and save them to our output video file.
The main thing to remember is that More Bitrate = Bigger Filesize

For example, if we record using a 1MB per second (1MB/s) setting, then after 2 minutes of recording (120s), our recorded file size will be 120MB. At that bitrate, if we recorded for one hour straight (3600 seconds), our recorded file size will be 3600MB (3.6GB).
If we record using a larger amount, let’s say 2MB per second (2MB/s), then after 2 minutes of recording (120s), our recorded file size will be 240MB. At that bitrate, if we recorded for one hour straight (3600 seconds), our recorded file size will be 7200MB (7.2GB).
It’s that simple. The more bitrate we use, the bigger the recorded file will be. 

For those used to video compression and editing, or even general users of multimedia, you may be more familiar with data rates in the realm of:

MP3 (MPEG-3 audio) song bitrates such as: 128kbps, 192kbps, 320kbps
PSP (PlayStation Portable) video bitrates such as: 768kbps, 1500kbps
DVD (MPEG-2) bitrates such as: 8000kbps, 9800kbps
Blu-Ray/HD bitrates such as: 16000kbps, 25000kbps, 50000kbps

All of these are usually expressed as Megabits/Kilobits/bits over time (in seconds), hence the “ps” at the end.
eg. 16 Mbps = 16,000 kbps = 16,000,000 bps (bits per second)

~bits (lower-case ‘b’) and Bytes (upper-case ‘B’) are different~

There are 8 bits (lower-case ‘b’) in 1 Byte (upper-case ‘B’)
8 bits in 1 Byte
8000 bits = 8 kilobits (‘kilo’, which is 1000 Bytes) = 1 KiloByte
8000 kilobits = 8 megabits (‘mega’, which is 1000 KiloBytes) = 1 MegaByte 

For example, if you were rendering out a movie to upload to YouTube and you chose an output bitrate of “8000 kbps” in your editing/compression application, that is 8 Mbps (bits, lower-case ‘b’), which means 8 Megabits per second. Converting that into Bytes (upper-case ‘B’), means that video will be running at 1 MBps, which is 1 MegaByte per second (upper-case ‘b’). 

At that bitrate (1MB/s), it is the same bitrate as our example above [just under where it says “More Bitrate = Bigger Filesize”] and it will take up roughly 60MB of space on your hard drive every minute of recording. Thus is the interaction between Bitrate and File Size and how to convert between the two. The higher the bitrate setting used, the bigger the output file size will be (the recording). 

There is one other formula to remember: More Bitrate = Better Quality. This formula applies to almost everything digital: video (DVD/BluRay), audio (MP3/MP4), pictures (PNG/JPG), any multimedia that is digital. If you allow/use more bitrate, the picture/music/video is represented better [or to be more precise, closer to the original input] because there are literally more bits used to create the picture/sound/etc.

Quick example – think of a square that is divided up into 9 sections. Now pretend it is trying to ‘represent’ a painting, any painting you can think of. With only 9 blocks of data available (each one can only be a certain color), then it would look like nothing but some colored blocks and barely look like the painting at all. Now, imagine a square divided up into 80 sections. Pretend it is trying to represent the same painting. Even though it will be ‘blocky’ still, if each section can be only one color, it will still look ‘more like the original’ than the 9-sectioned block, right? 

That’s the interaction of bitrate and quality.

Which means, for digital compression, it is essentially a ‘balancing act’ between Quality and File Size, with Bitrate being the tool to measure with. Do you want a high-quality output? Then turn up the bitrate and you’ll end up with a large file size. Do you want a small file size? Then lower the bitrate and you’ll get lower quality as well. That’s the essence of bitrate, in a nutshell.

Bitrate (in Layman’s Terms)  /end



The x264 Interface and Configuration in “Easymode”
(The Official interface with red x264 logo)

With the official version of the interface for using the x264 codec (“x264vfw”), there is only one screen, with pulldown bars to adjust most settings.
The Basic Section

To start with, under the Basic category, there is a Preset setting. This is a very handy setting, which makes many of the more obscure/hidden choices within this codec (there are dozens, behind the scenes) easy to configure. By clicking on the question mark near the bottom right corner (“?”), you can see the intimate details of the different Profiles and Presets that can be selected in these pull-down menu bars within this first “Basic” section of the interface.

For game recording, we are more concerned with speed. We don’t want the codec to break out it’s magnifying glass and scrutinize each frame coming through in strict detail, because that would cause it to slow down, which will cause it to ‘lag’ behind, not only in the game, but in the recorded file itself as well (“choppy-ness”). 
So, the first thing to do, when using this codec for ‘live’ game recording, is to change the Preset setting from it’s original default of Medium to “Ultrafast“. This is the fastest option for this setting.
The other options, such as Superfast, can also be used, but be aware that the more you go down the selections available, the more options are being ‘turned on’ behind-the-scenes with this codec, and while some of them do help apparent quality of the video, they are geared more towards a slow, steady, long-term compression session (like when you might archive a video/movie) with high-quality settings and slow, scrutinizing analysis of the frames. While not a bad thing, for game recording, we don’t want that. We want it to save what we are seeing on the screen fast, to a file. We want speed. Feel free to take a look and learn about the various options the other Presets turn on [many of them are covered in this article further down], but for optimal speed, Ultrafast is the setting to use.
The next pull-down set of options to choose from is Tuning. These are also a set of pre-selected options that, depending on which one you choose here, will enable or disable certain functions in the codec. These choices are helpful is easily fine-tuning the codec to compress a movie/video/clip of each certain type, as it enables options in the background that will help with efficient, detail-oriented compression of that certain type of material. 
For game recording, again we are more concerned with speed. These options, while helpful in a slow, ‘leave-it-overnight’ compression session of clips or movies of ours we want to save; for live game recording we want to leave it at it’s default setting of “None“, so that the codec keeps it’s magnifying glass put away and doesn’t spend any extra time analyzing the frames coming through.
There are two checkboxes below these first two pull-down menus and they are titled “Fast Decode” and “Zero Latency“:
Fast Decode turns off a few options [behind the scenes] that help by reducing the processing ‘load’ of the video stream, such as CABAC and Deblocking [these are explained in more detail further within this article]. These are options that help keep some quality (especially at lower bitrates), but as the name proclaims [“Fast”], for optimal speed of recording we want this option “Checked“, to enable it (which will turn off these extra options for now).
Zero Latency also turns off a few options behind the scenes, ones that increase compression time, such as B-frames [explained later in this post] and how far to ‘look ahead’ at frames coming in, for analysis. Since we want speed for recording our game footage and less analysis [remember, more analysis slows things down], we want this option “Checked” to turn off the extra options that are ‘behind-the-scenes’ with this setting.

The rest of the settings in this Basic section of the interface need not be adjusted for game recording, but a good Wikipedia page, talking about the various Profiles and Levels and their capabilities can be found here:
http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC

The Rate Control Section

All of the below paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

The main thing in here (and really the only thing to adjust for game recording in this tab) is the longest bar right in the middle, the main datarate control and compression decision to make, is all in that one bar. I cannot even make a suggestion on what to use [ok, I can actually], since it will partially depend on what type of game you are recording, your hardware, what kind of compression you are looking for and many other factors. I will attempt to simplify it however and give a suggestion at the end. (More importantly for game recording, there is one choice that is slightly faster than all the others).

To begin, since we are going to be using x264 for game recording, we cannot use the Leeloo Dallas Multipass Options. Multiple passes (usually 2 or 3) when compressing/archiving video can greatly increase quality, but that means 2-3 times the analysis, double-checking and then further compression by the codec. Literally processing every frame twice (for 2-passes for example). That’s great when we want to keep a movie in a small, ‘as-good/high-as-we-can-get’ quality, forever. When recording games however, we want [one guess] speed. We can only accept “Single pass” as our option, because we just want the codec to see what frames are coming in, take a quick glance, and compress them into our output video file. One pass.
Starting with ABR (Average BitRate), the “bitrate-based” setting, this setting allows you to punch in the average bitrate you want to record at and it attempts to stick with it (it will go lower, but try to never go higher than what you set here). This setting basically tells the codec, “Keep within this bitrate, I don’t care if the quality goes down”, because as the bitrate ceiling is reached, it will quickly degrade in quality, as more/high movement occurs on the screen/frame. It is good for keeping within a certain file size, if that is your desire, but it also causes a bit of ‘lag’ and is not seemingly optimized for ‘live’ capturing.
CQP (Constant Quantizer Parameter) is a setting where you are basically telling the codec, “Keep this level of Quality”, and it will do it’s best to keep that level of quality for all frames/scenes. However, it will spend more time (and bitrate) on fast-motion/high-action scenes. This is good if you want to keep a movie visible clearly when a lot of things are going on, but it will also result in the higher usage of bitrate, which means larger file sizes. This may sound like a good thing for game recording (and for quality, it is), but the time spent analyzing the faster-motion scenes means that it is actually slowing down (in terms of the codec breaking out it’s magnifying glass and scrutinizing the frames that are passing by), which results in ‘lag’, both in the game and in the recorded video file itself (“choppiness” on playback).
Lossless should attempt to lose no quality, processing only very little and passing all of that nice detail directly to the recorded video output. While sounding good in theory, in practice the utilization of ‘lossless’ in x264 must be geared towards slow, analyzed video compression and not ‘as fast as we can get to avoid lag’ “live” game recording, because the result of this setting [at this time] is actually a lossy, compressed (it does not seem to go far beyond 100,000kbps), low bitrate (compared to ‘true loss-less compression’ which is much higher) capture. It does look decent, but it is also very demanding on the system and causes a large framerate drop for the level of detail that should be coming out of it [and doesn’t]. This codec does not seem to be optimized for lossless recording at this time and I do not suggest using the Lossless setting here.
CRF (Constant Rate Factor) is sort of a combination of ABR and CQP. At any given rate factor, a certain bitrate is maintained, and when the motion on the screen goes very high and the bitrate gets too high to represent what is occurring in the frame (or hits the ‘ceiling’ bitrate that it is restricted to, which can be set), then the quality begins to suffer, as the codec ramps quality down and compresses the fast-moving (“not as easy for the human eye to see”) material, until things settle down on the screen and there is slower motion (such as a person walking). Then the quality ramps back up (the bitrate staying with the specified parameters) to keep the apparent quality high to the human eye. This is how CRF is supposed to work, and it seems to do a good job of that. 
Game recording with CRF isn’t as cut-and-dry as slow, long-term video compression/archiving with CRF, where it has time to figure out how to compress the fast/blurry scenes and make the slower/clearer scenes look better and change the bitrate/quantization respectively. Quantization can be thought of as ‘apparent spoilage’ of the material, where a certain amount isn’t even noticeable to most humans, and in some fast-moving-high-action scenes, it is even preferable to some eyes. Low bitrate and/or high quantization would both result in loss of detail and ‘blurring’ or ‘smoothing’ of video most of the time and can result in compression artifacts such as Macroblocks and Gibbs Effects (“mosquito noise”), as the codec tries to decide ‘what to keep’ and ‘what to lose’ (lossy compression). With CRF, it usually will try to keep a slow-moving scene (someone walking, people talking) detailed, without much quantizing (‘spoilage’), so that it looks good. It will take high-motion (fast action, fast changing) scenes and quantize them more (smoothing, blurring, ‘spoiling’) since the human eye won’t notice it as much on fast-motion, already-slightly-blurred changes on the screen.
To summarize the differences between the types of data rate controls (the choices in this pulldown bar):
CQP is like stating, “Keep this quality, I don’t care how big the bitrate/file gets” and ABR is like stating, “Keep this bitrate/filesize, I don’t care how crappy you have to make the video look to stay within that”, CRF is more like stating, “Try to keep this bitrate, but change it a little as you need (within a certain amount) and make the video look slightly crappy if you need to as well, but don’t let either one get too out of wack”. As CRF seemed to also be the one with the least amount of effect of the system in the form of ‘lag’ [only slightly less than the other ones in testing], being so highly configurable (compared to the other choices, where you can state a bitrate to stay within and it adjusts itself), I suggest using CRF for your x264/AVC game capturing.

Some Data / Bitrates seen with CRF

Since it looks like we are going to be sticking with CRF as our main datarate control factor [it performs slightly better than the other choices in tests], here’s an example of some bitrates that can result from using it (in kilobits per second):

Recorded game: Hitman: Absolution Benchmark [grainy, panning, high and low motion areas]
Recorded codec: H.264/AVC (MPEG-4 Part 10) using the x264vfw interface
Recorded settings [some]: No Deblocking, No Max Bitrate, No CABAC, adjusting only CRF

CRF 51  ~1200 kbps (lowest possible quality setting for CRF)
CRF 42  ~1600 kbps
CRF 32  ~6000 kbps
CRF 29  ~8500 kbps
CRF 26  ~14000 kbps
CRF 23  ~22000 kbps (codec default setting for CRF)
CRF 22  ~23000 kbps
CRF 21  ~32000 kbps
CRF 18  ~45000 kbps
CRF 15  ~64000 kbps
CRF 13  ~79000 kbps
CRF 10  ~101,000 kbps
CRF 5    ~119,000 kbps
CRF 1    ~119,000 kbps (highest possible quality setting for CRF)

As you can see, the higher the CRF, the lower the bitrate, so the lower the recorded file size will be (but also the lower the apparent quality). If you desire a higher-quality recording, then a lower CRF is what you want (even with a very low CRF, the bitrate is nowhere near as high as say, a FRAPS or YV12 recording (which can both easily be over 500,000 kbps), but that is the nature of the codec as it tries to slightly compress everything that passes through it.

It can also be seen, that is it is not a strict/hard-and-fast rule of evenly-spaced steps, when it comes to the CRF setting and Bitrate. It cannot be easily calculated that “two steps up in CRF equals this much more bitrate”. That is partially the nature of the compression and partially what occurs using CRF as a datarate control. When there is more motion on the screen and as it changes, the datarate will change as well, to try to keep within certain bitrate/quality boundaries and still accurately represent what is occurring on the screen/in the frames. With almost any form of compression/codec, only if the recording was using a completely fixed bitrate, or recording a static picture/view, would it be easy to calculate the adjustments required for a certain bitrate change. It is built into the codecs to adjust themselves as needed.

What CRF setting to use

So, what CRF setting to use? The general rule is: the lower the CRF number, the more bitrate/quality you are allowing it to use, but the bigger the recorded file size will be.

The choice is somewhat objective, as CRF18 may look good to me to record a first-person-shooter game with (the default is CRF23), but you may not like how it looks and want to use CRF10 to keep more details that you want to see.
Someone may not like the compression artifacts they can see when recording Minecraft using CRF18 and want to turn it up to CRF15 so that it is crisper, with less ‘mosquito noise’ around the edges or corruption that they can see; but you may think it looks good enough at the default of CRF23 and leave it there like someone else may do. You see?
Those are two very different types of video/games mind you, one is dark and grainy and the other is smooth, with hard edges, like animation; but you get the point. It can vary, not only person to person, but also game to game. A few short tests is all it will take however, and you quickly will find a CRF setting that you are happy to record with. You’ll find your own balance between, what will essentially be, these considerations:

The higher the bitrate (lower CRF number) the higher the quality and file size will be
The lower the bitrate (higher CRF number) the lower the quality and file size will be

You will eventually decide, with just a couple tests, what is ‘good enough’ quality for your eyes/uploading, and what CRF to use on that game (remember the ‘balancing act’ of bitrate vs quality mentioned at the beginning?). You will also find that the quality recorded isn’t even kept, after compressing the final/edited video to upload at a video sharing site somewhere.

All of the above paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

That’s about it for the nice-and-easy one-panel official graphical interface for the x264vfw H.264/AVC codec. Just a few small changes and a decision of what quality/bitrate you would like to use and it is all ready  for you to record with whatever game recording program you prefer. Have fun with it!

What follows below, is the unofficial, more detailed, three-tabbed version of the x264vfw H.264/AVC codec interface. If this version is not installed on your system, or you do not care to use the more complicated version (you definitely don’t have to), then please skip down to the section called 
“Slash-whew-sweating-emoticon”. No version is better than the other, by the way, they both utilize the same codec, one just gives you more options to set [and I happened to install it by accident when learning about recording with the x264 codec in the beginning], that’s all.

The x264 Interface and Configuration in “Hardmode”
(The Unofficial interface with black x264 logo)

There are three main tabs in this version of the x264 Video For Windows interface: 
Main
Analysis and Encoding
Rate Control and Other
Each Tab has many different settings. We will talk about most of them – but not all of them – we are mainly concerned with the ones that will affect game capturing. I am going to be going through the Tabs in reverse order. This will help to explain the concepts in a more logical order [believe it or not].

Rate Control & Other Tab

In the ‘Rate Control and Other’ Tab, our main attention need only be on the VBV bitrate/buffer settings in the first Rate Control area. The other settings can be tweaked, but this need be the only one to change – when concerned only with game capturing – as it can dictate the final output filesize of our recording. 
Why all that math and talk about bitrate above? Because of the very first setting we are going to cover, part of the Rate Control section:

The very first setting in this third tab of the x264vfw interface is something called “VBV max bitrate” and it is expressed in “kbit/s”. Yay, we just learned about that! It means that the value typed in here will be accepted as “kilobits per second”.

What does the “VBV” mean? It stands for “Video Buffering Verifier” and this setting will let us state the overall maximum bitrate we want to restrict the video recording to be, so that it does not go over it. 
Why would we want to do that? Remember that the amount of bitrate (per second) that we are using to record with affects the output video file size. If it is a large amount, the file size will be bigger. If we wanted to restrict the recorded output file size and keep it smaller, we could put an amount in here and it will do it’s best to keep within that amount, allowing us to control how much bitrate it uses to record with (and thus control how big the game recording output will be).
So, to use our example just above, if we wanted to restrict the bitrate of the game recording output to be only 1MB/s (1 MegaBytes per second), what do we do? 
That’s right, we convert it to lower-case (small-‘b’) bits, first:
We want 1 MegaByte per second of a bitrate
1 MegaByte is 1000 KiloBytes
since 1 Byte = 8 bits
then 1000 KiloBytes = 8000 kilobits
so to restrict the maximum bitrate allowed for our capture to 1MB/s (taking up 60MB of drive space per minute of recording) we would put “8000” in the ‘VBV max bitrate’ box.
This box then, gives some control over how much diskspace you want to devote to the game recording file output. If you do not want to restrict the bitrate, do not put anything in these first two boxes on this third tab. 
If you do want to set a restriction here on the bitrate, set a “buffer size” as well (the box just below the first one). This ‘buffer size’ gives a sliding-window-view of how much the codec will keep track of what is going through and ‘watch’ to make sure that it stays below the amount in the box above (the ‘max bitrate’ box). It is used more for compressing for portable devices (which have less RAM and are not able to buffer/keep track of a large amount at a time and therefore must have a restricted amount set here).  
For our purposes – game recording – remember that we must be more concerned with speed (to reduce lag), so in this box, we cannot put a very large amount. Why? Because the larger the buffer, the more that the codec will try to ‘store up’ in RAM, in order to ‘watch it’ (process it) and keep track of how big the bitrate gets, in order to keep our restriction of the ‘max bitrate’ box on it. So, a smaller amount such as “2000” up to maybe “4000” in this ‘buffer size’ box is a good amount. The overall buffer size also allows room for the video to ‘go over slightly and come back down to within’ the amount we set, but the larger the amount is, the more data will be held behind for processing that will be done on the game recording and the slower everything will get – and we don’t want that – we want as close to ‘Lag Free’ recording as we can get. A “0” then, would be the optimal amount to put in here, when speed is a concern; but then we would not be able to set a maximum bitrate… more on this later in the article…
That’s all we will adjust on the Rate Control & Other tab.
Analysis & Encoding Tab
Here’s where we will do the most adjusting, as these settings in here are the ones with the most impact on speed and game recording.
In the Analysis section, the first few adjustments are checkboxes concerning Partitions. Partitions are exactly what they sound like: it is how much the codec will divide up the screen, into sections, so that it can analyze each section and look at what is changing, decide how to compress it, how much to compress it, and so on. For game recording, remember we are more concerned with speed, than messing with how the codec is going to scrutinize the screen, so we are going to uncheck everything in the Partitions sections. Really. We are also going to uncheck the Adaptive DCT setting (which will deselect/lock out/grey out some of the checkboxes for us).
For game recording, we are going to leave a checkmark in the “Fast P-skip” setting.

Frame Types (in Layman’s Terms)  /start

There are three main types of frames in video encoding:
I-type frames
P-type frames
B-type frames

I-frames are ‘Intra-coded Frames’, sometimes called Information Frames, because they hold the most information in a ‘group of frames’ (which is what makes up a video) and therefore I-frames take up the most space (as far as the amount of space it will take up on your hard drive). They also look the best as well, as they usually use a higher bitrate (which is why they take up the more space). They are utilized by the codec to indicate a large change in what is going on in the video/on the screen, like a sort of ‘reset’. They can usually be identified by the screen being ‘cleared up’ of blocks/glitches from video compression, as the compressed video is played back. 

For instance, if you are running down a dark hallway and turn a corner and there is an explosion, in order to more accurately represent that large change in color and motion in the game recording, the codec will most likely decide to insert at least one I-frame and use a larger amount of data to keep more detail as it tries to represent all of the huge changes going on, on the screen and in the frames.

I-frames also serve some other purposes: the ‘intra-coded’ means that they are not dependent on other frames around it in the video  [which is a collection of frames], as they hold all the information needed to represent the frame all within itself [remember ‘inter-murals’ in school involved other schools and ‘intra-murals’ was contained all within your own school, this is the same thing]. 

They also are usually used as Keyframes. Since I-frames contain all the data need to represent the entire frame, on it’s own, video applications can use it as a ‘starting point’ or ‘reference point’ (“keying off of it”) and allow for more compatible cutting/editing on them and use them to start ‘seeking’ from, when editing a video. The two main things to remember about I-frames/Keyframes [the same thing] is that (1) I-frames can stand alone all by themselves, as they have all the information needed to display an image/frame, and (2) I-frames allow video editing programs [like Sony’s VegasVideo/MovieStudio/Pro and Adobe’s Premiere/Pro] to ‘reset’ and show you where you are starting to edit from – if there are a large number of frames between these I-frames (“keyframes”), it will take longer for the program to read between all of them and then show/allow you to start editing from where you have selected in the video editing program (it will take longer overall to edit by hand as the program starts and stops and you have to wait while editing).  

MJPEG game recordings are made up entirely of I-frames, as every frame in the captured video is it’s own JPEG compressed picture and it is the most editing-friendly and compatible codec to capture with, no matter what game capturing program you use. In fact, most video editors can read MJPEG without installing any other codecs on your system 

P-frames are called ‘Predicted Frames’. They hold far less information in a group of frames (video) and take up far less space. They actually only hold the differences from the Previous I-frame, that is, they only keep track of the changes on the screen/what has changed on the screen since the last I-frame, which is why they are far smaller than I-frames. 

For instance, if you are playing a character in a game and you are just standing at the mailbox reading an in-game message, there isn’t much changing on the screen at all. Perhaps on the side of the mail window, there is only someone running by and that is all that is happening on the screen, nothing else is moving at all. P-frames will only keep track of the movement that person running by and not keep track of the mail message or anything else going on in the frame (things that aren’t moving) and it will save only those changes to the game recorded file as P-frames. Hence, they can indeed take up a much smaller amount of space in a game recording, since they are only recording the things that are changing on the screen.

B-frames are ‘Bi-directional Frames’ (called ‘Bi-Predictive Frames’). They hold even less information than P-frames, as they are only keeping track of the differences between any frame before or after itself (even using P-frames that are around it and not needing an entire I-frame to start from). This means they are only only keeping track of very small changes (only one frame ahead or behind) and can therefore be extremely small and take up very little space in a video file. B-frames are one of the reasons why we can archive/compress movies in such small file sizes – only the differences of what is going on, on the screen/in the frames, is being kept track of. Both P and B frames help to save a ton of space when it comes to video compression.

Frame Types (in Layman’s Terms)  /end

Why all that talk about the different types of frames in a group of frames (video)? Because now we can easily understand the next few settings in the configuration window. 
Fast P-skip is a setting that allows the codec to look at P-frames and decide if there are enough changes to analyze it further, or ‘skip’ over them and just process them as they are. This is decided on by the codec when it looks at some other settings on this tab (such as the “ME” settings) but for the most part, it helps speed – our main concern with game recording – more than it helps things to ‘look good’, so we will leave a checkmark in it, as we briefly stated above.
Max frame refs and Mixed refs are talking about Reference Frames and how many to use in a group of pictures/frames. When encoding, a codec can use frames in front (P-frames) or in front and behind (B-frames) of the current frame it is working with, to keep tracks of what has changed between frames. When encoding for movies, we want as many as possible (or as many as the codec decides to put in) in order have things keep a lot of detail wherever it is needed, especially for scene changes; but for game recording, we want things to run faster (so that the game capture does not lag the game or cause lag within the recorded file (“choppy-ness” in playback), so we actually want the codec to use as little number of Reference Frames as possible.
Remember, every time the codec has to ‘think’ or analyze the frames more, it will slow down to break out it’s magnifying glass and scrutinize, so what we want for this setting is the lowest (one) Reference Frame (put a “1” in the Max frame refs box) so it doesn’t have to do much more work than just looking quickly one frame ahead or behind, when when figuring out what has changed. 
Mixed reference frames allow the codec to compress frames based on changes in frames that are also being referenced by other frames [if you can follow that]. Again, the codec is going to have to slow down and take a look, and for game recording, we want things to stay lean and mean (fast), so uncheck this bad boy (if you make the Max frame refs a “1”, it will be disabled anyway, since it does not have enough frames to deal with to look around at them anyway).
The next few settings down that all say “ME” refer to Motion Estimation. This is the process of keeping track of where things are moving on the screen and how to deal with compressing the changes it is keeping track of. For game recording, we want the codec to analyze as little as possible (so it doesn’t lag behind what is going on, on the screen) so we must choose the lowest settings for all of the “ME” options. 
That means “Diamond” analysis as the ME algorithm (pulldown menu choice), an ME range of the smallest we can choose from (“4”) and the lowest amount of Subpixel ME refinement we can have (“0” or no subpixel refinement). Remember, we want the codec to just save what is happening on the screen and analyze as little as possible, so it doesn’t fall behind.
With the choices above, Chroma ME and the Psycho-visual Rate Distortion Optimization strength will be locked out/not applicable, which is good for game capturing, as it scrutinizes the frames that are coming from the game even less.
The next couple settings, in the middle column of the tab, that say GOP in them, are talking about the size of the Group Of Pictures we want in our capture. If you can recall the things we have already said about how a codec decides to compress frames, it looks to frames ahead and behind at times, looking at the differences between them, and then decides how to compress the frames based on what it finds (and the settings we set). For movie compression, we want a large number, so that the codec mainly keeps track of the differences only between frames, as much as it can, and a large GOP size allows it a lot of ‘room to move’ and look around. For game capturing, we don’t want it to be quite as big, as the more frames on it’s plate it has to deal with, the more it will slow down and take time to decide what to do with them. 

There is also a chance that some video editing applications will not like the large (or any) Groups Of Pictures and may see the video stream as corrupted or give wierd artifacts/effects when it plays it back. This is one reason why using MJPEG as a game recording codec is suggested often, as it’s built-in GOP is “1”, as evey frame is it’s own self-contained ‘group’ and no editing app has to mess with it or over-analyze it. It is the most compatible, but you can use any codec you wish, but you may have to change the codec’s Keyframes or GOP to “1” for compatibility [more on this in future articles!]


Hence, we will set a nice low number [I personally used “50” around the time of this post]. Be aware that if the number is a multiple of the framerate you are recording in, Videophiles may notice the screen ‘shifting’ or having other odd effects ‘in time with’ the framerate (eg. if recording at 60fps and the GOP size is 60, some people notice the screen ‘correcting’ or ‘shifting’ or ‘flickering’ every second, as it ends the group or frames and starts a new one every second).
You can use “1”, which will make the codec act like MJPEG in a way, but then the codec will not have any room to analyze/compare/compress anything, and the resulting file will require much more bitrate to keep detail (to accurately represent what is going on in each frame)… more on that later in this article…
Weighted P-frames and Max consecutive B-frames is yet more analysis for the codec to do (especially B-frames, which remember, is a frame that ‘looks both ways’ for changes to frames in front and behind it, therefore can slow down recording a lot). For game capturing, we gots’ta keep setting things for speed and not letting the codec analyze too much. Change the Weighted P-frames to “None” (via a pull down bar) and the B-frames to “0” if they aren’t already. This is effectively telling the codec “you ain’t got time fo’ B-framez” so the rest of the settings that say “B-frames” should be locked/greyed out after that.
[In tests, enabling B-frames would actually crash the x264vfw app]
Under the Encoding section, the last column of this tab, the first section has to do with Deblocking
Deblocking is a way to try and ‘hide’ areas where the codec has cut out detail or ‘let go of data’ (lossy) in attempts to conform to the other settings in the codec and/or compress the frames highly. I’m sure almost everyone has seen Compression Artifacts like macroblocks or Gibbs Effects (mosquito noise) in high/over-compressed video and video streams. It’s not very pretty and turning on the Deblocking filter is one way of masking these artifacts, so that the video overall looks nicer to the human eye. 
The problem with Deblocking is that the codec will smooth things out, when trying to hide artifacts (especially ones that occur with lower bitrates/quality). It can be forced to keep detail with negative values (useful for movies/games with film grain), but overall it still takes more compression time to use, as the codec stops and analyzes the frames, looking for what to Deblock. So, for game recording for the most part, for optimum speed, Deblocking should be disabled, that is, “No Checkmark” in the box for In-loop deblocking filter (which will disable the two Deblocking settings below it).

[In my own trials/experiments, I found that a low amount of deblocking (as in “1”) for these two recording settings is acceptable and helps to hide some otherwise icky-looking compression effects that occur at lower bitrates (bitrate control is covered more in the next section), but for optimum speed (it is not needed at higher bitrates anyway) and especially for older/less powerful systems, turning deblocking off will always speed things up.]
CABAC is extra analysis that can really make a difference in compressing video. Some mobile players cannot even use it though, as it requires more processing power. The optimal setting for this, as it is extra analysis/processing being done – for game recording – would be “Off” (unchecked).

 [I have successfully done many recordings with CABAC on, as it seems to have only a slight effect on recording ‘lag’ on my system; but for optimum speed/less lag when recording (and at a slight loss for keeping some quality), it should be disabled.. for speed. ]

The only other thing to adjust in this tab, when game recording, is the Trellis setting. Trellis is a way of analyzing and attempting to keep certain detail when compressing, especially at lower bitrates, but as many times already mentioned, we want speed for game recording, so set the Trellis analysis to “Off” (via a pulldown bar). 

Main Tab

All of the below paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

The main thing in here (and really the only thing to adjust for game recording in this tab) is the longest bar right in the middle, the main datarate control and compression decision make, is all in that one bar. I cannot even make a suggestion on what to use [ok, I can actually], since it will partially depend on what type of game you are recording, your hardware, what kind of compression you are looking for and many other factors. I will attempt to simplify it however and give a suggestion at the end. (More importantly for game recording, there is one choice that is slightly faster than all the others).

To begin, since we are going to be using x264 for game recording, we cannot use the Leeloo Dallas Multipass Options. Multiple passes (usually 2 or 3) when compressing/archiving video can greatly increase quality, but that means twice the analysis, double-checking and then further compression by the codec. Literally processing every frame twice (for 2-passes). That’s great when we want to keep a movie in a small, ‘as-good/high-as-we-can-get’ quality, forever. When recording games however, we want [one guess] speed [I just realized this whole article can be it’s own drinking game]. We can only accept “Single pass” as our option, because we just want the codec to see what frames are coming in, take a quick glance, and compress them into our output video file. One pass.
Starting with ABR (Average BitRate), the “bitrate-based” setting, this setting allows you to punch in the average bitrate you want to record at and it attempts to stick with it (it will go lower, but try to never go higher than what you set here). This setting basically tells the codec, “Keep within this bitrate, I don’t care if the quality goes down”, because as the bitrate ceiling is reached, it will quickly degrade in quality, as more/high movement occurs on the screen/frame. It is good for keeping within a certain file size, if that is your desire, but it also causes a bit of ‘lag’ and is not seemingly optimized for ‘live’ capturing.
CQP (Constant Quantizer Parameter) is a setting where you are basically telling the codec, “Keep this level of Quality”, and it will do it’s best to keep that level of quality for all frames/scenes. However, it will spend more time (and bitrate) on fast-motion/high-action scenes. This is good if you want to keep a movie visible clearly when a lot of things are going on [I hate watching a low-quality video stream online and it goes absolutely-stupid blurry at high-motion scenes just because there are many things happening on the screen], but it will also result in the higher usage of bitrate, which means larger file sizes. This may sound like a good thing for game recording (and for quality, it is), but the time spend analyzing the faster-motion scenes means that it is actually slowing down (in terms of the codec breaking out it’s magnifying glass and scrutinizing the frames that are passing by), which results in ‘lag’, both in the game and in the recorded video file itself (“choppiness” on playback).
Lossless should attempt to lose no quality, processing only very little and passing all of that nice detail directly to the recorded video output. While sounding good in theory, in practice the utilization of ‘lossless’ in x264 must be geared towards slow, analyzed video compression and not ‘as fast as we can get to avoid lag’ “live” game recording. The result is actually a lossy, compressed (it does not seem to go far beyond 100,000kbps), low bitrate (compared to ‘true loss-less compression’) capture. It does look decent, but it is also very demanding on the system and causes a large framerate drop for the level of detail that should be coming out of it (and doesn’t). This codec does not seem to be optimized for lossless recording at this time and I do not suggest using the Lossless setting here.
CRF (Constant Rate Factor) is sort of a combination of ABR and CQP. At any given rate factor, a certain bitrate is maintained, and when the motion on the screen goes very high and the bitrate gets too high to represent what is occurring in the frame (or hits the ‘ceiling’ bitrate that it is restricted to, which can be set), then the quality begins to suffer, as the codec ramps it down and compresses the fast-moving (“not as easy for the human eye to see”) material, until things settle down on the screen and there is slower motion (such as a person walking). Then the quality ramps back up (the bitrate staying with the specified parameters) to keep the apparent quality high to the human eye. This is how CRF is supposed to work, and it seems to do a good job of that. 
Game recording with CRF isn’t as cut-and-dry as slow, long-term video compression with CRF, where it has time to figure out how to compress the fast/blurry scenes and make the slower/clearer scenes look better and change the bitrate/quantization respectively. Quantization can be thought of as ‘apparent spoilage’ of the material, where a certain amount isn’t even noticeable to most humans, and in some fast-moving-high-action scenes, it is even preferable to some eyes. Low bitrate and/or high quantization would both result in loss of detail and ‘blurring’ or ‘smoothing’ of video most of the time and can result in compression artifacts such as Macroblocks and Gibbs Effects (“mosquito noise”), as the codec tries to decide ‘what to keep’ and ‘what to lose’ (lossy compression). With CRF, it usually will try to keep a slow-moving scene (someone walking, people talking) detailed, without much quantizing (‘spoilage’), so that it looks good. It will take high-motion (fast action, fast changing) scenes and quantize them more (smoothing, blurring, ‘spoiling’) since the human eye won’t notice it as much on fast-motion, already-slightly-blurred changes on the screen.
To summarize the differences between the types of data rate controls (the choices in this pulldown bar):
CQP is like stating, “Keep this quality, I don’t care how big the bitrate/file gets” and ABR is like stating, “Keep this bitrate/filesize, I don’t care how crappy you have to make the video look to stay within that”, CRF is more like stating, “Try to keep this bitrate, but change it a little as you need (within a certain amount) and make the video look slightly crappy if you need to as well, but don’t let either one get too out of wack”. As CRF seemed to also be the one with the least amount of effect of the system in the form of ‘lag’ [only slightly less than the other ones in testing], being so highly configurable (compared to the other choices, where you can state a bitrate to stay within and it adjusts itself), I suggest using CRF for your x264/AVC game capturing.

Some Data / Bitrates seen with CRF

Since it looks like we are going to be sticking with CRF as our main datarate control factor [it performs slightly better than the other choices in tests], here’s an example of some bitrates that can result from using it (in kilobits per second):

Recorded game: Hitman: Absolution Benchmark [grainy, panning, high and low motion areas]
Recorded codec: H.264/AVC (MPEG-4 Part 10) using the x264vfw interface
Recorded settings [some]: No Deblocking, No Max Bitrate, No CABAC, adjusting only CRF

CRF 51  ~1200 kbps (lowest possible quality setting for CRF)
CRF 42  ~1600 kbps
CRF 32  ~6000 kbps
CRF 29  ~8500 kbps
CRF 26  ~14000 kbps
CRF 23  ~22000 kbps (codec default setting for CRF)
CRF 22  ~23000 kbps
CRF 21  ~32000 kbps
CRF 18  ~45000 kbps
CRF 15  ~64000 kbps
CRF 13  ~79000 kbps
CRF 10  ~101,000 kbps
CRF 5    ~119,000 kbps
CRF 1    ~119,000 kbps (highest possible quality setting for CRF)

As you can see, the higher the CRF, the lower the bitrate, so the lower the recorded file size will be (but also the lower the apparent quality). If you desire a higher-quality recording, then a lower CRF is what you want (even with a very low CRF, the bitrate is nowhere near as high as say, a FRAPS or YV12 recording (which can both easily be over 500,000 kbps), but that is the nature of the codec as it tries to slightly compress everything that passes through it.

It can also be seen, that is it is not a strict/hard-and-fast rule of evenly-spaced steps, when it comes to the CRF setting and Bitrate. It cannot be easily calculated that “two steps up in CRF equals this much more bitrate”. That is partially the nature of the compression and partially what occurs using CRF as a datarate control. When there is more motion on the screen and as it changes, the datarate will change as well, to try to keep within certain bitrate/quality boundaries and still accurately represent what is occurring on the screen/in the frames. With almost any form of compression/codec, only if the recording was using a completely fixed bitrate, or recording a static picture/view, would it be easy to calculate the adjustments required for a certain bitrate change. It is built into the codecs to adjust themselves as needed.

What CRF setting to use

So, what CRF setting to use? The general rule is: the lower the CRF number, the more bitrate/quality you are allowing it to use, but the bigger the recorded file size will be.

The choice is somewhat objective, as CRF18 may look good to me to record a first-person-shooter game with (the default is CRF23), but you may not like how it looks and want to use CRF10 to keep more details that you want to see.
Someone may not like the compression artifacts they can see when recording Minecraft using CRF18 and want to turn it up to CRF15 so that it is crisper, with less ‘mosquito noise’ around the edges or corruption that they can see; but you may think it looks good enough at the default of CRF23 and leave it there like someone else may do. You see?
Those are two very different types of video/games mind you, one is dark and grainy and the other is smooth, with hard edges, like animation; but you get the point. It can vary, not only person to person, but also game to game. A few short tests is all it will take however, and you quickly will find a CRF setting that you are happy to record with. You’ll find your own balance between, what will essentially be, these considerations:

The higher the bitrate (lower CRF number) the higher the quality and file size will be
The lower the bitrate (higher CRF number) the lower the quality and file size will be

You will eventually decide, with just a couple tests, what is ‘good enough’ quality for your eyes/uploading, and what CRF to use on that game (remember the ‘balancing act’ of bitrate vs quality mentioned at the beginning?). You will also find that the quality recorded isn’t even kept, after compressing the final/edited video to upload at a video sharing site somewhere.

All of the above paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

Slash-whew-sweating-emoticon

That was a lot to take in at once – but you made it through – and now you are set to record using H.264/AVC, whether you prefer Dxtory, Bandicam or use the completely free-to-use Afterburner from MSI. You are also now knowledgeable in both the Official and an Unofficial version of the x264 Video For Windows graphical way of setting up the codec, to change the settings.

Other than the Rate Control setting above (CRF) which you can adjust and set how you want it, the rest of the settings I have personally tested and found which ones allow for the faster recording performance and which ones negatively affect the speed of recording, utilizing the x264vfw interface (which these programs use to record in H.264/AVC). Turning off/down the ones I have stated throughout the article should give you the fastest/closest to ‘lag-free’ recording you can get with this codec, while still taking advantage of it’s compression capability. [My own Personal Notes/Opinions/Settings are below]

Please note that if your system is older or not as capable (perhaps you have a notebook/laptop which has less capability than a full desktop system with it’s own dedicated videocard and soundcard), you may have to do things like lower the recording resolution (or the resolution you are playing at in the game), increase the CRF number (so that it uses slightly less system resources to process the recording and will then use less bitrate and less disk space).

There are many things that can be done to help with speed, make for smoother recording, less lag, etc.
Here is a link to an article I wrote earlier on this blog, with general Tips to help with game recording:
http://gametipsandmore.blogspot.ca/2012/05/tips-for-game-recording-currently-text.html
No matter what game you play or what program you are using to record, these Tips will help you overall, with trying to record your games.

Lastly, please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you will. 

As always, do some of your own testing, see what works the best for you on your system and get things looking exactly how you want them to look – and have fun with it!


Personal Short Version/Opinion
and 
Settings I use:

H.264/AVC (MPEG-4 Part 10), is not normally a recommended codec to record with, for most people. It does not have the capability of super-high-almost-what-you-see-is-what-you-get quality that other codecs like FRAPS1, YV12, Lagarith or RGB Raw would give you. 
Heck, the highest bitrate possible (using the CRF setting, the fastest of the Rate Control settings in my tests) is only about 100,000kbps. That’s still about 2-4x the bitrate of the average BluRay movie mind you, and it seems fine to me, to look at the recorded videos of it.

Even if I had Terabytes of hard drive space to record to, I would still like to record in as small a filesize as I can, attempting at the same time to keep ‘good enough’ quality. Gone for me, are the days of filling my drives with FRAPS recordings (which have very high quality though) when today, with the more powerful CPUs and GPUs, I can record in a high MJPEG setting (for compatibility with editing apps) or a high MPEG-1 setting (which saves a lot on diskspace as well and has decent compatibility with video editors) – and now I can save even more space and record with MPEG-4 AVC, if desired. 
For instance, on my older system, a dual-core cpu with an NVIDIA GTS250, recording with x264/AVC brings my framerate down by about ten frames per second and sometimes more. On my newer system, a six-core cpu with an AMD HD 6870, recording with x264/AVC, with the same settings, brings my framerate down by only a couple of frames per second with my settings. Wonderful stuff.

I did many, many tests to find out what specific settings made differences (especially with the Unofficial version of the interface) and for the most part, it turned out as intuitive as it seemed at the outset: any setting that increased analysis and processing of the frames slowed things down. 
I had to test it all of course, and I found many settings that didn’t make a ‘huge’ impact on performance, and with more powerful hardware these are able to be used and enjoyed, helping to compress the frames even further, keeping decent detail and resulting in a very small recorded file size. As you can adjust/optimize settings far more in the Unofficial interface (at least a bit easier/graphically), I tend to use that one more than the Official version; but in essence, both are the same thing. Here’s some of my findings [my settings are in these square brackets]:

For the Official (“Simple”, red x264 logo) interface:

I found that, on a more modern desktop system, the Preset can be turned ‘down’ a bit (the amount of analysis going up a bit), to Superfast or even sometimes Veryfast, since many of the hard-cpu-hitting options like Trellis and larger Motion Estimations don’t kick in at these settings. Anything lower/slower than that makes it lag behind too much as it processes frames.
[I usually use Superfast]

While Zero Latency is pretty much required for live game recording, Fast Decode is not entirely needed, especially if you have a faster rig to power the game and record at the same time on. My computer isn’t even top of the line but it can handle NOT using Fast Decode (which disables CABAC, and a couple other things). CABAC can have quite a bit of an effect on quality, and since it doesn’t seem to have a huge performance hit, I use it. Fast Decode also disables Deblocking and that leads into my next setting…
[I always use Zero Latency]
[Even though it helps with speed, most of the time I don’t use Fast Decode]

The only other thing I change in the interface is deciding on the main Rate Control type and Rate Factor. In my own tests, CRF seemed to have the least amount of effect on framerate out of them all, and I fluctuate on what CRF I use, depending on the game I’m recording and what the recording is for. If I’m recording a high-quality test, of course it will be a low CRF, but it need not be a 1 to look good. I am quite satisfied with a CRF of 15-18 for decent-quality captures. The bitrate of a 1080p capture at that CRF ran about 45,000kbps, which is a high-quality BluRay movie’s bitrate. For just average gameplay for fun, I usually run a CRF of 21 up to 23. The quality is ‘good enough’ then, especially with a low Deblocking setting helping out (the Preset of Superfast leaves Deblocking “On” at the default 0:0 setting). I don’t recommend going below CRF23, with deblocking or not, as it just becomes too ‘garble-y’, to use a more technical term… Web broswer/low-motion games or hard-edged/animated games that look like Minecraft also need a higher bitrate (lower CRF), so that the hard edges aren’t messed up and the smooth/flat areas aren’t too compressed and get ‘blocky’.
[I use a CRF in the range of 18 for higher-quality capturing, going up to 23 if disk space is low, and don’t suggest higher than 23, so that quality doesn’t suffer too much] 

Nothing else need be adjusted in the Official x264/red logo interface, but I sometimes add “–keyint 50” or “–keyint 20” into the area (no quotation marks) ‘for advanced users’ at the bottom. This is a command that will force a keyframe/I-frame after that many frames have gone by. This helps to keep the seeking time low when editing and allows for closer cuts when not recompressing the clip when editing. If you having a problem with editing MPEG-4/AVC files, try using a –keyint setting of “1”, so that every frame is an editable/seekable keyframe. A higher GOP is better for file size but can take longer to seek when editing and Vegas or Premiere might have ‘trails’ or ‘corruption’ so might need a GOP setting of 1, see here for more info). You may want to increase the bitrate to keep quality then though, as the codec can’t really compress/do much of it’s ‘magic’ then, without room to work between frames. As stated above, the optimal codec for editing is MJPEG, but many do not like the quality (try turning it up to 100%).
Leaving it blank and not using any “–keyint” command will allow the codec to use many more frames (250 is the default I believe) for compression and the resulting recorded file size will be very small.

For the Unofficial (“Complicated”, black x264 logo) interface:

The first tab is just the Rate Control setting. CRF seemed to have the least effect on framerate.
I also sometimes add the –keyint setting to the command box at the bottom, just like I talked about a couple paragraphs up.
[I use a CRF in the range of 18 or less for higher-quality capturing, going up to 21 or if disk space is low, up to 23 at the most and don’t suggest higher than 23, so that quality doesn’t suffer too much]

For the second tab, there is a lot to change, but I mainly talked about why up in the article, so I’ll just state what I like to use here, after this paragraph on Deblocking:

Deblocking can be forced to ‘leave things in’/keep details, by using a negative value, especially when dealing with effects such as film grain and minute details and noise; but for the most part deblocking will ‘smooth things out’, especially trying to hide where a lot of detail has been lost, where compression artifacts like Macroblocks and Gibbs Effects (mosquito noise) around edges would show up. I don’t recommend putting deblocking up too high though, as it can really make things downright blurry. With deblocking completely off, all of the detail is kept, but many things can look like they have a ‘wood grain’ pattern on them. With a high bitrate/low CRF, there is no need for deblocking at all anyway, as there would be a lot less compression/artifacting. When recording a high-quality test or something like that, I leave it off. When just recording random gameplay or myself doing something, I turn it on at a low setting, to help with keeping things looking slightly more ‘clean’.
[I use Deblocking at 1:0 (CUDA default) up to 3:0, when I use it, but any more and things start to look ‘too smoothed out’ to me]

For this second tab then:
[No Partitions (all unchecked, Fast P-skip checked, 1 Max reference frame, ME algorithm on Diamond, ME range of 4, Subpixel ME refinement of 0 or 1 (any higher causes more lag), GOP size of 20 or 50 (this is the –keyint setting from above, higher is better for file size but can take longer to seek when editing and Vegas or Premiere might have ‘trails’ or ‘corruption’ so might need a GOP setting of 1, see here for more info), No Weighted P-frames, Max consecutive B-frames to 0 (none), In-loop deblocking filter unchecked (off) or checked (on) with a 1:1 deblock, CABAC on (it’s slower for less-capable systems), DCT decimation checked (on), Trellis set to Off]

In the third and last tab of the Unofficial (black x264 logo) interface, I sometimes set a VBV max bitrate of about 40000 (kbps) just to keep the filesize down, especially when I’m going to edit and recompress for uploading somewhere (which usually gets rendered out for upload at that bitrate or lower anyway), it looks ‘good enough’ for me (this also requires a buffer of some sort, to allow it to check the bitrate as it goes up and down, so I put in 4000 or 10000 if I set a VBV max bitrate)
[No maxbitrate usually, unless you want to save some harddrive space (eg. 50000k)]

That’s all I change for both of those interfaces, from their defaults, as of the time of this post. 
Keep in mind that as games are updated and Re-Optimized, drivers are Updated, and new hardware is released/purchased, I may change these settings (and I advise you to try some tests too, if you wish, when things change). Also, I am not a stickler for the utmost quality and don’t mind things getting compressed a bit, so you might want tighter/higher settings. 
Mainly, I hope that this info helps some of you to either record with less lag (many people report that with more optimized MPEG-4/AVC settings they have less apparent lag) or just learned some terms and concepts that may help when editing and compressing your own videos/shows/etc and overall just help you record better/smoother. I actually enjoyed testing all of these things out and learning about it and I hope it helps anyone that is recording their gameplay adventures.


See you in the games!

WORKOUT ANYTIME on Entrepreneur.com

Bill Aicklen, owner of four WORKOUT ANYTIME locations in Georgia, was recently featured in Franchise Players, Entrepreneur.com’s Q&A interview column! Bill discusses his background as a franchisee, challenges he’s faced and why he chose WORKOUT ANYTIME as the business model to get behind. Read the full interview here!

Fallout 4 – “Starting Out: On Settlements, Building, Crafting, Materials And More” – A Beginner’s Guide of Tips and Concepts to Settlement Building and Development [UNDER CONSTRUCTION]

Update: Added images for Main Concepts sections (Food, Defense, etc)
Update: Added steps for How To Assign a Settler to a Work Station/Shop/etc
Update: Added how to Give Yourself Any Building Components, or Food, with Commands (Cheats Section)
Update: Added how to Build past the Size Limit in Settlements (Not a Cheat, Doable on Console as well as PC)

[Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there is a Steam Sale on now (go get it! heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]




I have been having a ton of fun playing Fallout 4 lately… and while I am taking forever to finish up a ‘First Impressions’ of the game [I keep playing and building up my Settlements instead of writing!], I wanted to share some Tips on handling Settlements; some concepts and ideas that might help new users to the game, players that may not have developed their Settlements very much yet, or players that are looking for ways to possibly improve or increase their Settlements and their Production and associated benefits (Bottlecaps income from Stores, Settlers roaming around and finding/providing you with Supplies, Clinics for healing and removing Radiation, and more).

Screenshot showing the Workshop Area of The Sunshine Tidings Cooperative, Decorated (Work In Progress).
(High Resolution Texture Pack enabled [not 100% sure, sorry, but I think it was at this time]
The Automatron DLC Robot Workbench can be seen, center background. Minuteman Flag seen, left wall, foreground)
Click to see Full Size

[Settlements and their development and growth is one of my favourite aspects of the game, not only because it supplies you with Junk/Scrap/Materials to build with and Money as well, but also because of the ‘life it breathes into the game’… every Settlement becomes ‘alive’ with people coming and going, working and resting, asking for help or talking amongst themselves around you. After getting a few Settlements set up and running smoothly, they become a place to restock, sell and collect, modify and improve gear, rest and maybe enjoy some scenery, taking a break from the action by building and re-working, improving and creating a place of solitude and pride, in each little ‘town’ in The Commonwealth…]

Example of the Workshop Mode interface bar, normally seen at the top of the screen in Workshop Mode (Building mode)
Click to see Full Size 

Here then, are some main ideas to start off with or to keep in mind  – hopefully helpful to fellow gamers who are either starting out in Fallout 4 [from the latest Steam Sale], or are looking for ways to improve their currently-undeveloped Settlements (colour-coded somewhat-by-importance to help separate them for easier reference):

1.  In the very beginning, build Food and Water and Beds, as much as you can.  

These three things (Beds, Water, Food) are the main limiting factors to how many people will come to live in a Settlement. 

 [The maximum amount of people that can ‘live in your town’ is supposed to be your Charisma+10 (so if you have 5 Charisma, that would be 15 people); Provisioners who run Supply Lines (more on them later on down further) don’t seem to count towards this calcuated total (by my experience so far). Also, this limitation is stated in many places online – however, I have Settlements that are much higher than this number (over 30!) so I have not finalized the concept of Settlement Limitation Amount, at this time] 

Don’t worry about Guard Posts and Turrets, at least, as much as you might think at the start – because although they do help with the overall safety of your Settlement; reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in the Raids, and setting a higher Security rating (which seems to affect Happiness, but not Immigration rate – more on Happiness later on…) – you can actually put the responsibility on yourself to take care of Raids at first [and get the bonus experience and loot that comes with it!] by Fast Travelling to the Settlements as soon as you see the ‘Help Defend’ tasks come up – or making ’rounds’ between your Settlements as they are starting up, as Raiders sometimes attack while you are there and you can then help clear them out – and get all the Loot they drop, too! 

[The game leads you towards building Turrets at your Settlements near the beginning, too – in the form of a ‘tutorial’ of sorts, somewhat-early on]


2.  Plant any Food (Corn, Tatos, Mutfruit, Gourds, Watermelon and Razorgrain) you find, at first.

Starting out, you want to maximize your growth, so re-planting food you pick up not only increases how much food a Settlement can produce/feed for the Settlers, it also multiplies how much you can harvest!

You can harvest any plants by ‘picking them’ (hitting the Action key while close to them). You can then immediately re-plant the food you just picked, by entering Workshop Mode and going to the Resources>Food section.

A while later, you can start to Cook with your Food – not only do the meals you prepare have special bonuses (they are all different!) but boiling up some VEGETABLE STARCH, made from all materials that you can gather at any Settlement, is a great way to create your own Adhesive building material. Used for almost everything, Adhesive is a very important material to have!



Vegetable Starch, a source of Adhesive, you can create yourself by cooking together Corn (3), Mutfruit (3), Tatos (3) and using Purified Water (1). Purified Water, you can either find as you travel, cook yourself [3 Dirty Water can be boiled up to make 1 Purified Water], or use Water leftover from your Water Sources in your Settlement – as any extra Water that is not used by your Settlers will be ‘kept by the Settlers in the Workshop inventory’ [in the Workshop Bench]. You need Adhesive for Modifications to Weapons and Armor and even for Building – it is used for almost everything and is therefore very important to keep stocked!




3. Tied for the third most important thing/things to start thinking about, are these two concepts:

    • As you can, increase your Turrets and Guard Posts, to increase the Security of the Settlements, and as stated above, reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in Raids, and keeping your Settlers ‘feeling secure and more relaxed’ (Happier), too. 

    Although the Security Rating of a Settlement (“Defense”) does not effect the speed at which Settlers will immigrate to your little town, the Defense Rating of a Settlement affects the Happiness Rating – which affects how ‘Productive’ the Settlers are in that Settlement (speed of gathering resources, amount of Caps earned, etc) – more on Happiness later on…

    If you have more Guard Posts than you have assigned Guards, they will ‘patrol’ around the Settlement, going between them, back and forth. If you have the same amount of Guard Posts to Guards, they will each stay at one, standing ‘on guard’, most of the time.

    [I personally like to have a couple extra Guard Posts created in my Settlements just to have the Guards move around more… It creates more movement in the Settlements overall and makes them ‘feel more alive’ – something I really like in my Settlements!]

    • Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, “automatically” for you to then use!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time – they will even ‘break down’ the items at the Scavenging Station – and you can watch them do it! 

    [If you have the Automatron DLC/Expansion, you will find that robots Assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    ‘How do you Assign Settlers to Scavenging Stations?’
    Further down, there are Steps with Screenshots for each,
    in the Section “How To Assign Settlers To Work Stations”


    After a while, with more Settlers coming in (sometimes they will migrate to your Settlements quite fast, seeing a solid place to find food, water, beds and have some security/safety), you’ll start to see Junk/Scrap/Materials pile up slowly, even Bottlecaps flowing in, sitting there waiting for you in the Workshops of your Settlements. 

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    Don’t forget to ‘make your rounds’ and periodically travel around to check all of the Workshops, grabbing these extra ‘Caps and ‘Mats, snatching-up the extra Purified Water you’ll see in them, to sell for even more Bottlecaps (especially if you are more desperate for money sometime). Purified Water is created by extra Water production of the Settlement; water that the Settlers aren’t using from the Sources you have set up. This extra Water gets placed in the Workshop for general use and Supply Line provisioning to other Settlements – but since it sells for a decent price and ‘piles up for free’, grab it and Sell it, if you really need ‘Caps!



    4.  As you find more Settlements, start up Supply Lines between them all…

    Supply Lines are ways to ‘share’ the resources of the Workshops between Settlements. You assign a Settler to create a Supply Line between two Settlements, and they then become a “Provisioner”, leading a Caravan between the two Settlements, taking supplies between them so that you can effectively ‘use the Junk/Scrap/Materials/Components of both of them’, no matter which one you are in!

    Supply Lines are started by entering Workshop Mode, then going up to a Settler (one that is Unassigned with no ‘job to do’, or one that you want to make run a Supply Line instead of the job they are currently assigned to) and choosing Supply Line from the bottom menu bar.

    That townsperson will then become a Provisioner, leading a caravan and a wacky Brahmin through the wilds of The Commonwealth… between the Settlement that they originated in and the one that you assigned them to make a Supply Line to.
    Between these two Settlements then, you can utilize any* Junk/Scrap/Components between them, in their Workshops.

    *Note that it appears you cannot share any Weapons or Apparel that you put in [I have not tested Miscellaneous items yet]; you can only share Junk [as of the time of this posting, this may change in a future Update/Patch in the game, of course].

    Requirement: Supply Lines require the Local Leader Perk to be able to ‘organize the people’, which requires a Charisma of 6 – but it has no Level requirement, so you can get it at the start of the game if your Character has a Charisma of 6. If your Character does not have a Charisma of 6, you can also put Perk Points into Charisma as you Level – you get one Perk Point every time you gain a Level – thereby slowly increasing your Charisma to 6, eventually. You can also put on Gear and Clothes that ‘accentuate your Charisma rating’ [eg. Apparel that says “CHR 1”], to get your Charisma up to 6 ‘instantly’!

    [With places like Tenpines Bluff, a Settlement you find somewhat-early on, that has barely any resources at all and barely anything to Scrap for Building Materials – the game seems to even be encouraging you to think about Supply Lines… at least, this is my interpretation..]

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!


    Workshops will create Scrap building materials (Components) for you ‘automatically’ from any Junk Items you store in them – just ‘keep building’ and if you have the Junk that can be broken down into the Components you need, it will do it for you!



    What I mean by the above Tip is, if you put in a bunch of Forks and Knives you have found (for example), and you want to build something in your Settlement that requires Steel to build with, just go ahead and start Building – your Workshop will ‘smelt/breakdown the Junk items (in this example, the Forks and Knives) into Steel’ automatically, so you can essentially ‘use the Fork and Knife to build with’ – you do not need to “drop the items on the ground and then go into Workshop Mode and Scrap the items one by one” to get the Materials from your Junk items to Build; just select your part to Build and it will let you build it – if there is enough “components from junk parts” to do so!

    [I’m not sure if this changed from an early Patch or something, but I see a bunch of people asking in forums, even recently, if there is an easier way to get Scrap (building materials) from Junk items besides manually ‘Scrapping them one-by-one on the ground in Workshop Mode’ – there should have been a better Tutorial for this, in a way, in the game itself; but I hope this information above clears it up and helps people out]

    Remember: 
    Junk Items = Scrap Components = 
    Building Materials!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!
    • Repeated, Scavenging Station concept from above, as a Reminder:

      Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, ‘automatically’ for you!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time.

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    [If you have the Automatron DLC/Expansion, you will find that robots assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    How To Assign Settlers To Work Stations (To Get Them To Perform Jobs In Your Settlement, Such As Running Shops/Stores Or Gathering Items For You To Use)

    Below, are the five simple steps to Assigning a Settler to any Work Station, getting them to utilize it and start contributing to the income of Supplies/Income of the Settlement. In this example, we are going to Assign a Settler to a Scavenging Station:

    1. When you first build/place a Station or Store/Shop or other useable buildings in your Settlement, it will show up as “Unassigned”, in the Workshop Mode interface. All buildings that are Assignable in a Settlement will show a ‘person icon’, in Red, to show that the building has a Requirement that needs to be fulfilled, for it to begin functioning.

    2. Find a Settler that you want to Assign to the Station. This can be a Settler that is already “Assigned” to something (so you can change their Job they are Performing in your Settlement), or a Settler who is “Unassigned” (doing nothing specific). Highlight the Settler by looking directly at them, then press the ACTION button to begin to ‘COMMAND them to do something’…

    Settlers who are Unassigned still gather Junk Items they find while walking around and put them in the Workshop Inventory for use by everyone. However, this happens slower than if they were Assigned to a Scavenging Station (which gives them ‘access to tools’). “Unassigned Settlers” contribute to ‘making people feel uneasy’ in the Settlement – which negatively affects the overall Happiness of that Settlement (resulting in lowered Production for that Settlement). Assign all Settlers to Tasks, or Relocate them to another Settlement (“Move” them), if there are no Jobs/Tasks for them to do.

    3. Go back to the Station/Shop/Building that you want to Assign the Settler to, and highlight it by looking directly at it. Then click the ACTION button to ASSIGN the Settler you just started COMMANDing, to ‘utilize this Station’ (in this example, the Scavenging Station, shown below).

    4. After clicking ASSIGN on a Station/Shop/Building, the ‘person icon’ should change from Red to Green, to show that a person is now assigned to the Station/Shop/Building (for example, the ‘Requirement for the Station to function’ is fulfilled). You should also see a message in the upper-left saying, “This resource is now assigned.” – that’s it! In this example, you have now Assigned a Settler to the Scavenging Station.

    5. If you go back to the Settler, you can check to make sure they are properly Assigned, by looking at them directly in Workshop Mode. They should now show the Task they are Assigned to (in this example, the Settler now shows a “Scavenging Station Icon” (a Buzzard, ‘the scavenger bird’)).

    Perform the above steps whenever you want to Assign a Settler to any Work Station, Guard Post, Shop or Store – the steps are the same, no matter what you need to have Assigned.

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Example of a Crafting Station, which allows you to create or modify items in the game. This is a Weapons Workbench (from Sanctuary), used to Modify found Weapons, adding higher capacity, faster firing rates, more powerful scopes, and more.
    (Click to see Full Size)


    Starting out with Weapons (Similar Concept to Armor, Below)

    In the beginning, other than the best Weapons you can save for yourself to use (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Weapons to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Weapons you find and improve them as you Unlock Perks with your Points (using the Blacksmith skill) – it will also let you find other parts/materials as you ‘break down’ the Weapons you find into typical weapon-type-materials like Steel, Wood, Plastic and Screws – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Example of a Crafting Station, that allows you to create or modify items in the game. This is an Armor Workbench (from Sanctuary, seen in the rain), used to Modify found Armor, adding bonuses like more defense (adding more material to armor), or putting pockets in it (to allow you carry more weight), and more.
    (Click to see Full Size)




    Starting out with Armor (Similar Concept to Weapons, Above)

    In the beginning, other than the best Armor you can save for yourself to use, (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Armor to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Armor you find and improve them as you Unlock Perks with your Points (using the Armorer skill) – it will also let you find other parts/materials, as you ‘break down’ the Armor you find into typical armor-type-materials like Rubber, Cloth, Leather and Steel – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Short Story/Example About Armor: Because I could Modify and Customize Raider Arm armor near the beginning, I gave up the higher-protection “DC Guard Left/Right Arm” armor pieces that I picked off of a poor dead DC Guard, [because it does not seem to Modify-able in the game and] because I ‘knew how to Modify’ the Raider Armor to be POCKETED for higher Inventory/Carry space [you need to ‘learn how’, by putting Perk Points (‘skill points earned every Level’) into Armorer, a Strength 3 skill]. I put the DC Guard Armor in a Dresser at the beginning for the time being, using the ‘Pocketed Raider Arms’ I could Modify, then – a higher Carry Weight Limit is a valuable commodity – especially at the beginning!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Did someone say CHEATS?

    Sick of trudging around The Commonwealth like a Brahmin with two heads cut off, looking for junk to break down into materials to ‘just build’ with? Tired of picking up every piece of Junk you find, trekking in and out of town constantly and thinking “I just want to build up my base…” or “can’t there be an easy way of getting junk” or “there’s gotta be a faster way to get junk”..?


    Then wonder/wander no more – there is a way to instantly get all the materials you want!

    In Fallout 4 [and most Bethesda games], you can type the item you want and how many you want, of any item in the game, into the Command Console. However, you need to know the item’s Unique Identification Number, first (known as the “Base ID” of the item, in Bethesda games). 

    One way to find the Base ID of any item or object in Fallout 4, is to open the Console (by hitting the Tilde key, “~”, usually found next to the Number 1, in the line of numbers across the top of QWERTY keyboards), and clicking on the item or object in the game. It will then show the BaseID of the object at the top/center of the Command Console area.
    For an example; if you wanted to find out the Base ID of that Deathclaw running at you (and since we are in the ‘Cheat Section’ of this article, say… you want to kill it instantly), then you would find out the ID for it by opening the Console (“~”) and clicking once on the Deathclaw (it should be ‘frozen’ by opening the Console), which would show the BaseID of it just below, at the top of the Console area. Now, for this example of ‘killing it instantly’; you just have to type in “kill”, then a space, then type in the BaseID you see on the screen, and hit Enter. BOOM. That Deathclaw that was running at you (and you were unprepared for, full of inventory and unable to run, no doubt)? It’s dead. “First Crack At The Gear!” 

    [Note1: If you try ‘clicking on the enemy, then typing KILL, then just hitting ENTER’ right away; it may not work as desired. You may end up killing yourself… Although those steps do work, they do not seem to work 100% of the time [in my testing], therefore, the Suggestion of doing the steps from just a bit above (“clicking to get the ID, but typing in KILL and the ID number”), is recommended – to save from accidentally killing yourself and having to LOAD…]

    [Note2: The BaseID seems to change [in my testing], as in, when a Deathclaw (from our example above) ‘spawns’ (comes out of the ground), it will have one ID (and it seems to be ‘unkillable’ for a short time), and then when it starts to come at you and attack, it will change to another ID – which can then be used in the Command Console to ‘kill’ it. Also, Base Identifiers may be ‘Procedurally Generated’, which is, automatically and repeatedly created and changed, as a game goes on. Although this does not seem to happen for items like Food and Materials, it does seem to happen with Enemies and Gear (Weapons/Armor) – so be sure to take the steps above when trying to manipulate objects around you (eg. ‘kill’-ing an enemy), finding the BaseID each time, to be sure that there will not be a mistake or missed opportunity, to utilize the BaseID in the Console.]

    Want nearly-infinite food?
    Want nearly-infinite materials to build with?
    Want to ‘just build and not worry about going around collecting Junk (to build with)’? 

    Then wonder/wander no more – here is a way to instantly get all the building materials you want!


    [WARNING/Suggestion: Although getting all of the items you could ever want, whenever you want, to ‘Just Build’ – effectively turning the game into “Fallout 4: The Sims Apocalypse” where you just Build and Decorate and work on keeping your Settlers at bases Happy (not that that’s a bad thing) – it can potentially contribute to making the game ‘less exciting’, as it takes away much of the need to go anywhere or do anything (other than keep your Settlers’ Happiness maintained). This isn’t a bad thing necessarily (I have one Character I created just to play around and learn the Build Mechanics with and have fun just building and decorating..). I only mention this because I would like to Suggest to create a separate Character to do this with, or remember that when the game ‘gets kind of boring’, to create a Character where you ‘don’t cheat at all’, to create suspense/tension within the game. No matter how you prefer to play though, I hope you enjoy Fallout 4 as much as I have – and still do… Have fun!]

    I have some Batch Files for Fallout 4 below, which will allow you to ‘type in to the Console what you want’ [Materials to build with, or Food (so you won’t have to worry about Farming or feeding your Settlers)] and you will instantly have a ton of those items on your character.
    With the Items in them listed in Alphabetical Order, I have one file that is for getting Materials (Scrap/Junk to Build with), one file that is for getting Food (to Eat/Cook with) and one that is for getting huge amounts of both in one shot…

    To use these Batch Files in Fallout 4, simply download the Text file(s) and place them into the Fallout 4 game directory/folder, where the game data/files are.
    [Don’t worry, they are just Text Files, but I give directions on how to make your own further down, if you ‘don’t like to download things unknown very much’.]


    To quickly find the Fallout 4 game files location [in Steam, on PC]:

    Go to the Library section in Steam and Right-Click on the “Fallout 4” listing, choosing ‘Properties’.

    In the Properties window that comes up, click on the ‘Local Files’ tab.

    It shows you what Drive the game is on; but to quickly get to the game files themselves, click on the ‘Browse Local Files’ button, which will open a new File Explorer window (Windows).

    This location is where you want to Save the Text Files to (the ‘Batch Files for Fallout 4’), usually it will have a Path like “SteamLibrarysteamappscommonFallout 4” on whatever Drive/Partition you installed the game to.

    In that folder, Download/Save (or ‘Paste’, if you ‘Copied’ the files from another location) the .TXT files, to be able to call them up from the Command Console in-game. 

    Example of how the ‘Batch Files’ (Text Files) look, after being placed in the Fallout 4 Game Folder
    (Click to see Full Size)
    Here are the steps to use the .TXT-format ‘Batch Files’ once they are in the game directory (shown for the file for getting Food, the file for getting Building Materials, and then the file for getting Huge Amounts Of Everything To ‘Just Build’ if you want...):

    1A. To use the file that gives you 1000 of all types of Food (so you don’t have to worry about Farming or Feeding your Settlers for a long time); type in

     bat allbasefood

     in the Command Console and hit Enter. That’s it!  

    1B. You can now close the Console and you’ll find you have 1000 of every type of Food in the game, on your person.

    1C. Go to a Workshop to Store the Food there (otherwise you will be ‘overburdened’ with all of that Food in your pockets) – you will find the Food items under the AID section in your Pip-Boy, as shown below:

    2A. To use the file that gives you 1000 of all types of Materials to build with (all of the Crafting Components, so you don’t have to worry about going out and looking for and collecting Junk items to Scrap for a long time and can ‘Just Build’, if you want to play that way for a while); type in

    bat allbasematerials

     in the Command Console and hit Enter. That’s it! 

    2B. You can now close the Console and you’ll find you have 1000 of every type of Building and Crafting Material in the game, on your person.

    2C. Go to a Workshop to Store the Materials in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Crafting Components in your pockets) – you can just hit the STORE ALL JUNK button, to do it in one step.

    For the last one, which gives 9001 of every single type of Food AND Crafting Component in the game [maybe I should have named it “IJUSTWANTTOBUILD.txt”], use the steps below:

    3A. To use the file that gives you 9001 Of All Types Of Everything To ‘Just Build’ With (all of the Crafting Components in the game, so you don’t have to worry about going out and looking for and collecting Food OR Junk items to Scrap, for a long time and can ‘Just Build’); type in

     bat allyourbase9k

    in the Command Console and hit Enter. That’s it! 

    3B. You can now close the Console and you’ll find you have 9001 of every type of Building and Crafting Material in the game, on your person.

    3C. Go to a Workshop to Store the Junk Items (Materials) and the Food (from the AID section in the Pip-Boy), in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Every Frelling Thing In The Game For Settlement Building in your pockets).  

    Here is where to Download the Text Files to place into the Fallout 4 directory/folder (the ‘Batch Files’ to use), from the GoogleDrive for The Blog:

    allbasefood.txt file
    allbasematerials.txt file
    allyourbase9k.txt file

    If you don’t like to normally Download things ‘from unknown places/people’ [aren’t we just ‘Friends That Haven’t Met Yet, though, my dear reader?], here is what the Google Drive link looks like when you click on it:

    Still, feel free to Scan the files with your installed Anti-Virus Program(s), or online through something like Virustotal.com (this is actually a good idea to do with anything Downloaded..).

    If you you rather create your own Text Files, to place into your Fallout 4 directory/folder, to run as ‘Batch Files’, to give yourself an amount of these items, instead of fully Downloading the Text Files offered above – then here are the steps to create your own files:

    Is There A Way To Build More, Past The Limit?

    Sadly, there is a limit to how much you can Build in a Settlement – indicated by the SIZE bar in the Upper-Right corner of the screen in Workshop Mode. While this limitation is there to stop us from building so much that it makes the game go down to 1fps in that area, the SIZE limit is pretty conservative [in my opinion] and I found out that there is an easy way to ‘Build More’ – getting past that Build Size Limitation….

    When you see the message, “Nothing More Can Be Built.”, you can just press your lips together and blow, making that weird trumpet sound, after reading the steps below. No Limitations for you! Just follow these steps and you can continue to Build in that Settlement:

    (Note that this is not a Cheat, it does not affect Achievements and it is doable on Console as well as PC)

    • Get some Weapons together on your Character (specifically Guns, as this specific technique does not appear to work with Melee or Thrown in my testing). Apparel and Junk does not work for this either.
    • Bring up the Pip-Boy and Drop the Guns on the ground
    • Close the Pip-Boy and enter Workshop Mode (by Activating the Workshop Bench or holding ‘V’ (on PC) to open Workshop Mode)
    • Look down at the Guns on the ground and STORE them in the Workshop Inventory (careful not to SCRAP them, that is not what we are doing here at the moment!)
    • You should now see your SIZE bar going in reverse and it will even change from Red to Yellow to Green. BOOM. More Room To Bloom. 

    That’s it! You can now build more in that Settlement. Enjoy! If you want to retrieve your Weapons, you can just go into the Workshop Inventory (“Transfer”) and get them back – which means you can repeat these steps over and over, as needed! (Don’t forget to Share your Screenshots on Steam or elsewhere – other people want to see what you can do – and it gives them new ideas, too)

    Although it is possible to get past the Build Limit by simply dropping ‘any item’ and Scrapping it [I recently learned this on the Steam Forum for Fallout 4], this is still not what I was trying to do, with the Steps above. My intention was to STORE the Guns, so that they can still be utilized later – selling them for Bottlecaps, or ‘Breaking Them Down’ and taking their Modifications off to use on other Weapons, or just using them as Weapons in the game on the Character (or given to Settlers to help them fight off Raids/Attackers) –  that is why the Steps above utilize my method. Storing the Guns allows you to continue to use them (as opposed to Scrapping them into Components to Build/Craft with).



    [……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful, for either starting out in the game or improving your Settlements (there are more advanced concepts to come….. Have fun with Fallout 4!]

    Speedrun – Hitman: Blood Money – A Vintage Year (Silent Assassin, Pro Difficulty, Suit Only, Targets Only, “No Coins”)

    Messing around trying another Speedrun, this time booting up some good’ol Hitman: Blood Money, “A Vintage Year” level.

    Hitman is a wonderfully crafted, enjoyable game. In my opinion, every single installment in this series has been. People have enjoyed the ‘puzzle-play’ aspects of it, people have enjoyed the gunplay, the stealth. Players have also enjoyed trying to run as-fast-as-they-can through levels that were probably not designed with this intention. Now, Hitman: Blood Money may not win any awards for “realism” in some areas of gameplay, but I personally have something against the concept that an Assassin, wearing a nice suit, most likely a millionaire, is carrying around twenty dollars in pocket change. Heck, I am sometimes annoyed at the jingle in my own pocket of a couple of quarters when I come across them. Thus, my personal aim with this level: to do a Suit-Only, Targets-Only, Silent Assassin, ‘No Coins’ Speedrun (on Professional Difficulty). I am probably not the fastest at this sort of thing, I have only done a couple of intentional Speedruns in the past; but it was still fun to make and I figured it was ‘decently fast’, so I wanted to share. Enjoy!

    Recorded game:  Hitman-Blood Money, First/Third Person Shooter/Stealth/Action
    Recorded with:  Bandicam (Registered Version) @ 1080p
    Recording codec:  MPEG-1 @ 80% Quality (Default Setting), 30fps

    This was actually not as hard as I thought it would be – after finding out that Delgado.Sr is snipe-able up out on his balcony. It was his Son that gave me trouble (as it seems to do with everyone, after a few forum finds on the subject). I started just pushing him down the stairs and also setting up the Barrels to fall on him; but eventually I settled on just a good-old-fashioned-assassin-stand-by: the single bullet to the head. This felt ‘right’, after sniping dear-ol’Dad, anyway. Instead of pushing the Guards at the bottom into the water, I just walked non-chalantly by them, as they didn’t seem to care anyway.
    [On the actual Playthrough, I seem to get some guards’ attention, but I assumed this was for going into the areas I wasn’t supposed to, not for being witnessed killing anyone]

    I also wanted to do things like ‘leave nothing behind’, such as ‘just dropping weapons’ (like the Sniper Rifle) to save time. This sort of stems from the multitude-of-coins thing… Don’t get me wrong by the way, I appreciate the time so many have taken to figure out their own ways to complete Hitman levels by using distractions. I just for some reason [OCD?lol] find it hard to extend my fantasy thinking within the game ‘that far’ – to where a so-called Silent-Assassin-slash-Hitman is always carrying around and actually utilizes enough laundry money to make the homeless cry on every mission. [I didn’t actually mean to rant here, hah] I just think if an assassin wanted to throw anything around to distract guards, it could more realistically at least be a found weapon of some sort, as opposed to a ton of coinage everywhere (pebbles could even make more sense).

    At any rate, whether you use coins (a mechanic that is indeed offered directly within the game) or you don’t, there you have it; not the fastest run [or the most ‘Silent’ lol], but hopefully an enjoyable little watch, nonetheless.

    See you in the games!

    Curing the carb on a vegetarian diet

    Adapting the Fast Track, No Backtracking and Keep on Tracking plans for vegetarians raises all sorts of issues. It certainly isn’t impossible, but your level of choice will be somewhat restricted in the initial phases of the plan — especially if you are a bona fide vegetarian who doesn’t eat fish or eggs, as well as meat. A balanced healthy diet is the ultimate aim of these plans.

    Many people adopt a vegetarian diet for reasons of health rather than ethics, but unless you are careful about menu-planning, the average vegetarian diet isn’t necessarily any healthier or less fattening than that of a non- vegetarian. There is often a tendency to combine too many complex carbohydrates with high levels of saturated fats — think pizza, jacket potato and cheese, fries with manufactured mayonnaise or sugar—ridden ketchup. In fact the chances are your diet could be less healthy. This is because vegetarians need to eat a variety of plant-based foods to provide all the essential amino acids that are readily available in animal protein. If just one of the essential amino acids is low or missing then protein synthesis will fall to a very low level or stop altogether.

    Diet Start

    Complimentary proteins

    The key to ensuring that you recive the full compliment of essential amino acids on a vegetarian diet is to combine beans and grains. If you always choose a protein and a grain from the two lists below then your protein intake should be balanced.

    The risks of a diet too low in protein

    If you arenot careful then you may not have enough protein in your diet. Protein deficiencies in adults may result in lack of vigour and stamina, mental depression, weakness and poor resistance to infection. Antibodies will not function as well as they could — a condition that impairs the healing of wounds and recovery from disease. If you have been through a period of ill health then a higher intake of protein is vital in order to rebuild or replace tissues that are no longer functioning properly.

    Good nutrition

    In addition to making sure that you eat enough protein, a vegetarian diet may also be lacking in iron, zinc, calcium and vitamin B12 and D — all of which are normally found in animal products. However, these vitamins and minerals can all be found in alternative animal-free sources, and these foods should be staple foods on a vegetarian diet.

    Low-carb plans for vegetarians

    You may think that it is impossible to follow the Fast Track, No Backtracking and Keep on Tracking plans if you are vegetarian, but you would be wrong. If you want to create vegetarian versions of these plans then there are a number of simple rules that you will find it helpful to follow:

    • Eradicate all processed and refined carbohydrates from your diet.
    • Follow all the general guidelines for the individual diet plans, such as drinking lots of water and eating the bulk of your fruits and vegetables raw.
    • Use the individual plans as a starting point and adapt the recipes to suit your diet.
    • Use tofu, whey protein drinks, certain cheeses, eggs and nuts to provide adequate levels of protein and help you to balance your blood sugar levels.
    • Always carry snacks such as nuts, protein drinks or hard-boiled eggs with you as it may sometimes be difficult to stick to your diet when you are eating out.
    • Try to avoid situations where it would be very easy to break your resolve, such as when you are hungry and the only lunch option available is a sandwich.
    • If a book exists called A million and one things to do with tofu — buy it.
    • Make food as interesting as possible by experimenting with fresh herbs, spices and oils rich in omega-3 fatty acids such as flaxseed oil.
    • Boost the nutritional value of your food by adding fresh sprouts, such as alfalfa, to your salads, soups and smoothies.
    • If you start to feel tired and lacking in energy, add small amounts of brown rice or other wholegrains to your meals.

    Quick Tip: Medieval II Total War – ‘Fatal Graphics Error’ [Possible Fix]

    I first bought this great game as a DVD Retail Box and then later on purchased it through Direct2Drive [when Direct2Drive was around, then that service became GameFly (2015 Edit: and now it’s D2D again)]. I also have it on Steam as a backup digital download source – it’s too hard to resist those really cheap Steam Sales! Recently, I was Re-Installing M2TW, to begin conquering the world once again… However, I was surprised to see nothing but an error message (on Windows7):

    The “Fatal Graphics Error” message, when starting MTW2

    I personally found this error humorous, as it complained about Graphic Settings – and I couldn’t even start/get into the game to change or even set them in the first place! So, I started Troubleshooting….

    Apparently, a lot of people, on many forums, have been getting and asking about this error – and still are – so here is a great chance to share this Quick Tip on a simple ‘fix’ for it I eventually found, simply by playing with the Shortcut Properties:

    Right-Clicking on the Shortcut for the game and editing the Compatibility Tab to match these settings,
    is how I fixed the Fatal Graphics Error problem when I played M2TW recently. Try it out!
    Click image to see Full Size

    After making these changes to the Shortcut that runs the game (adding two quick checkmarks in the checkboxes shown above), after launching it should show a black screen [detecting settings?] momentarily and then load up the game properly (you may have to click on the icon in the Taskbar [Windows] to bring it up a second time) but that’s it!
    Hopefully that works for you all, as it did for me.

    See You In The Games!

    Cellulite Breakdown and Essential Detoxification part 1

    Waist Disposal

    `Excess fat is nothing less than a poison depot in an over-acid organism.’ These words were uttered half a century ago by Danish physician Kristine Nolfi — an expert in healing the body through diet. They lie at the core of the cellulite phenomenon. One of your body’s most effective ecological mechanisms for protecting itself from excessive poisons taken in through food, air and water or produced from within as a by-product of metabolism is to lock these toxic materials into fat cells. In the case of cellulite this natural protective mechanism goes one stage further — encasing these wastes in the interstitial fluids and ground substance by binding them within hardened connective tissue. There they sit year after year producing jodhpur thighs.

    Diet Start

    Personal Energy Crisis

    This whole self-protective process is perfectly normal and, all in all, functions rather well, except for two things. First, in the presence of a high level of female hormones it tends to turn intocellulite. Second, it tends to deplete your energy — not only on a cellular level so metabolic processes don’t function in an optimal way but overall so you are prone to fatigue and need stimulants such as coffee to get you going and to keep you going. For in any body which has a high level of waste stored in its cells, much of the available energy is channelled into trying to cope with these wastes instead of being used to keep metabolic processes functioning at a high level of efficiency. In broad terms you sense a lack of overall vitality and over the years develop a tendency to become chronically tired — sometimes so much so that it can even become very difficult to make the effort to help yourself. To shed cellulite you need first to help your body detoxify itself and eliminate the pockets of static tissues where, like stagnant ponds in a meadow, toxicity has been allowed to accumulate.

    A lot has been written in recent years about detoxification. Some of it can sound quite mystifying. But the whole process is really quite simple. The reason you have built up these pockets of wastes is simply that your body is continually having to cope with more poisons than it can eliminate in the normal day- to-day course of events. Remove some of the burden of what is creating this excess toxicity in your system by laying aside coffee, alcohol and over-processed foods complete with chemical additives for a time, and you are halfway there. Add to that a very simple and temporary regime designed to trigger rapid detoxification, some movement and some external help, and quite naturally you trigger your body’s own mechanisms for clearing out the junk. This is the first step in the Cellulite Revolution. There are lots of ways you can do it but the simplest of all to begin with is to go on a two-or-three-day applefast.

    Applemagic

    The apple has long been valued as health tonic, medicine, cosmetic and bowel-regulator all in one. Apples are low in acidity to help balance stored bodily wastes which tend to be acidic. They stimulate the flow of saliva in the mouth and clear away debris from the teeth. Eating raw fresh apples stimulates circulation in the gums too. In folk medicine the apple was traditionally used for eliminating obesity (in part no doubt because of its detoxifying ability) as well as for the treatment of skin problems, bladder inflammation, anaemia, insomnia, intestinal parasites and even bad breath. In recent years we have come to appreciate the kind of fibre apples contain. In addition to cellulose (the most common variety of fibre such as that in bran which binds water and increases faecal bulk), apples are also rich in pectin — a special form of fibre with exceptional detoxification properties. Unlike cellulose, pectin does not bind water. It is water-soluble. Pectin has no influence on faecal bulking, but it can be an excellent substance to help lower cholesterol and for eliminating bile acids from the intestines. Also, and in many ways most important of all for keeping cellulite away, pectin is a natural chelating agent for binding dangerous heavy metals in the body such as aluminium, cadmium, mercury and lead, and eliminating them.

    12 Days of Fitness with WORKOUT ANYTIME

    12 Days of Fitness with WORKOUT ANYTIME

    Are you in need of a little inspiration to hit the gym this holiday season? Here’s a great workout routine to give a try this holiday season provided by the experts at WORKOUT ANYTIME. Enjoy! 

    Week 1

    4 days of exercise

    2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 
    2 days of body weight or weight training for 12 min per day
    Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

    Squats
    Push-ups 
    Walking Lunges
    Jumping Jacks
    Burpees
    Ab half roll backs (seated position, roll half way back, come up and exhale)

    Week 2 

    4 days of exercise

    2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with their moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

    2 days of body weight or weight training for 12 min per day
    Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

    Pop Squats
    Push-ups w/alt knee
    Forward Lunges with bicep curl
    Plank Jacks
    Mountain Climbers
    Ab full roll up (lying position, roll all the way up, and exhale)

    Week 3

    4 days of exercise

    2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

    2 days of body weight or weight training for 12 min per day
    Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

    Squat swing with overhead tricep press
    Spider-Man Push-ups 
    Reverse Lunge with bicep curl
    High Knees
    Shoulder push-ups
    Navy Seals (Ab exercise)

    Number Talks Chapter 1 – Thumbs Up for the Silent Thumb

    I’m linking up with my friend Misty over at Think, Wonder, & Teach for her summer book study of Number Talks: Helping Children Build Mental Math and Computation Strategies, Grades K-5

    Given that I’m wrapping up a K-5 Math Endorsement this month, this is a timely book for me. I love to teach math far more than I ever anticipated that I would when I entered this profession, and I really enjoy getting students to share and discuss their mathematical thinking. I’ve noticed, however, that many students lack strong mental math and computation strategies, relying instead on memorization to get them by. By the time they get to 4th grade, that’s not really a viable strategy anymore. They’re starting to work with much larger numbers, and they subsequently have more parts and steps to keep straight in their heads. If they don’t have great mental math strategies going, then it’s likely to become a mess pretty quickly. They can always solve problems on paper, but unless they have the good number sense that goes with doing mental math, they’ll never be able to gauge the reasonableness of their answers. In those regards, this book seems like a great idea.

    Chapter 1 really just introduces the concept of a number talk, and Misty does a great job summarizing it, so I won’t go into that here. One of my favorite teaching ideas from the book so far, however, was the idea of the “Silent Thumb.” When students are given a mental math problem, they need some “think time.” But every class has 2-3 students who are super math-letes who have the answer before the rest of the class has even processed what problem they’re being asked to solve, and those kids with their proud “I know! I’ve got it!” hand-waving typically end up dominating the conversation. The “silent thumb” solves that problem. All students hold their hand in a fist over their chest as they solve the problem. When they’ve got an answer, they move their hand from a fist to a “thumbs up.” They then think of another strategy to solve it while the other students are thinking, and for each additional strategy they come up with, they extend a finger. Awesome, right? I love how this gives all students some think time without creating pressure for some kids to hurry up because the fist is held close to the body — not waved in the air for everyone else to see. It also validates those super math-letes for their mathematical thinking by allowing them to communicate to the teacher that they have multiple strategies for solving the problem. And if they don’t have multiple strategies, then they have something to think about while the others are working.

    I’m definitely interested in learning more about Number Talks, and I’m excited to delve into this book a bit more. I’ll be posting more about this book in the weeks to come as I link up with Misty’s book study.

    If you don’t currently have a copy of Number Talks, you can still read the first chapter online. The book is a little bit pricier than most professional development books, but it comes with a DVD full of examples and it has a lot of resources packed in the text. If you’re looking to increase students’ mental math abilities, then this could be a great resource to use.

    Be sure to check out Misty’s Number Talks chapter 1 linky party where you can add some ideas of your own or read what other teacher bloggers are saying about the book. I promise you’ll find some great ideas there!

    And click here to see my review of Chapter 2!

    Have you ever done Number Talks in your classroom? I’d love to hear about your experiences in the comments section!

    Thanks for reading,

    CONCEPT KIDS ROOM PAINT COLORS DESIGN

    KIDS BATHROOM PAINT COLORS

    Looking for ideas for decorating Kids Room Paint Colors? Enter a space about the longevity of choosing background elements that are long lasting. Then use the equipment, bedding, area rugs and cheap to create themes easily hangeable. Unlike other rooms of the house, which mainly reflects your personality, decor rooms children requires slightly different approach. If you are a first time parent or a veteran, decorating baby rooms are not childs play.

    This is a very complex process in which an adult is to incorporate all the safety features and mix with a childhood fantasy. The room is a device identification of the child, not yours. But the change of the children, then you need to think ahead: the design is easy to change a child of five years or two? There is room for storage, research, animal or doll collections, or a wrestling match?

    First, consult with the child. Be sure to consider the child likes or dislikes when decorating their space. Decorating the kids room paint colors is a work in progress – planning begins before birth and continues throughout childhood. You can be as creative and on top of your child you are dynamic and playful colors work well in a child’s room. Always paint childrens rooms with a semi-gloss, if the walls are easy to dry without being too bright.

    Regarding storage, check your local do-it-your-own for a wide range of affordable solutions. As children grow, learn, play and explore their environment should respond. Children will love the exciting makeover, because they focus on their preferred interests in all age groups. As your child grows, ask for their input for kids room paint colors.

    KIDS ROOM PAINT COLORS
    KIDS BEDROOM PAINT COLORS

    Workout Anytime Daily 10 Prehab Routine

    Everyone knows that prevention is better than dealing with an injury, and part of injury prevention is spending time working on what are commonly referred to as “corrective exercises” or “Prehab”.   10 minutes a day spent doing 10 basic exercises can prevent many injuries, improve results from exercise, and dramatically improve movement.
    Ideally do these exercises barefoot or in socks – your feet will be working very hard during these exercises and shoes reduce ground feel.  If possible do them in front of a mirror to see your form!
    Hip Hinge – Hip Hinging is one of basic primal movement patterns, and it is also the movement pattern most frequently done incorrectly.   The best way to groove this movement pattern is practice it using a wooden handle or PVC Pipe held vertically against your back touching the back of your head, the top of your shoulders, and your tail bone.  By keeping contact with all three points as you hinge it teaches you to maintain a flat back which is essential for preventing low back injuries and developing proper movement mechanics that allow you to effectively load and unload the glutes and hamstrings.
    It is also a phenomenal dynamic warm-up for the hamstrings!   Here is a video showing how to do it:  https://www.youtube.com/watch?v=PG67O49Hsso    Do 50 reps per day and you will see and feel positive changes in your posture, movement, strength and mobility!
    Downhill Skier Exercise– This exercise contains elements of the squat and hip hinge.  Start by placing the hands palm down on the top of the thighs.  Keep the back straight slide the hands down until the palms are resting on the knees with the hips back like you are a second basemen.   You should begin to feel a stretch in the hamstrings.     Continue to hinge from the hip forward and slide down until your elbow are resting on the inside of the knees with back straight and hips back like you are a downhill skier.  This will require your knees to track forward over and maybe even slightly beyond your toes (this will generate a stretch in the calf muscles and specifically the single joint soleus muscle).    Keep your heels down the whole time – do not let them lift up off the floor!
    Keeping the back totally straight extend the knees as far as possible – you should feel a strong stretch in the hamstrings.  Your hips will rise but keep your elbows on the knees and do not move the upper body!  Then drop the hips, flex the knees and let them move forward over toes as you drop back down to the downhill skier posture.
    Start slow but as you get the hang of it you can move faster – as long as you maintain proper form.     Do 30 – 50 reps every day.   You will start to notice that your squat and your hip hinge movements all get easier along with improved mobility in the ankle knee and hip!   Click here for a great video of how to do this exercise properly:  https://youtu.be/nXKWtlr3rBQ
    Goblet Squat – Squats are another primal movement pattern and goblet squats help emphasize the best form.   They should be done daily with a relatively light weight for a good 20 – 50 repetitions.    Keep the dumbbell, kettlebell or Sandbag held against the chest the entire time. If you have difficulty getting thighs parallel to the floor spread your feet farther apart, and also rotate out at the hips so that your feet are pointing outwards.   This can make a huge difference.   By doing this and holding a light weight against your chest you may find you can squat to a decent depth while maintaining an upright torso.  It should look like this:  http://cfitness.me.formecdn.com/2016/12/goblet-squat.jpg  
    Alternatively you can hold a kettlebell/Dumbbell with both hands letting it go straight down between the legs as you squat down like this:  http://workoutlabs.com/wp-content/uploads/watermarked/Pile_Sumo_Dumbbell_Squat1.png
    Single Leg RDL – Romanian Deadlift – is one of the most important corrective exercises you can do to help self-identify and correct muscle imbalances that are the most common cause of movement dysfunction and injury.
    The best way to do this exercise is barefoot in front of a mirror where you can see your whole body throughout the entire sequence of the exercise.  Ideally you should be on a firm and level surface as well.
    Start by facing the mirror standing on one foot with the other leg flexed so your thigh is parallel with the floor and knee flexed to 90 degrees with hands on your hips.  Look in the mirror and make sure your hips are perfectly level and if not fix that!   
    Next, without moving the upper body extend the flexed leg down and hinge forward at the hip of the standing leg.   As your swing leg passes the other leg you should try to straighten it, and ideally you hinge forward at the upper body while keeping your swing leg and upper body in a straight line the whole time.
    As you hinge try NOT to let your swing leg hip drop and keep your stance foot pointing directly forward with no angle.  The stance leg should flex slightly but the knee should NOT move forward – rather you should “sit” back into the hinge at the hip. Pause when you reach at or near parallel with the floor with your upper body and swing leg then smoothly return to standing and flex the swing leg.    Slower is harder AND better and do NOT use any load/weight.
    10 repetitions on each side each day!   Do all 10 on each side one time per day and you will see some amazing changes in your strength, balance and athleticism! 
    Here is a great single leg RDL tutorial:  https://www.youtube.com/watch?v=vc21IwnIcwk
    Hip Thrusts – The hip thrust simultaneously develops the glutes while enhancing mobility in the hip flexors (both key because this counteracts the negative effects of sitting all the time!).  These can be done on the floor or with shoulders on a bench, bed or sofa to make it a bit harder.   You can do hip thrusts with two legs or one leg at a time to create additional load.   Here is a good shot of the exercise:  http://cdn-www.womenshealthsa.co.za/wp-content/uploads/2015/02/hip-thrust-hold.jpg
    Important NOT to arch lower back at all and concentrate on squeezing glutes at top and NOT using low back.    Even without any load this exercise can produce great benefits – 20 – 50 reps each day!
    Plank – The plank is a simple functional core exercise that produces great benefits.  It can be done on toes and hands (upper push-up position), Toes and Elbows, Hands and Knees, etc to adjust the difficulty.    Do a version of the plank that challenges for one minute per day while maintaining good form.   Here is a great article on some of the many variations:  http://www.health.com/health/gallery/0,,20813896,00.html/view-all
    Side Plank – The Side Plank is also key to building core strength, but in the front plane (side to side stability and strength).   30 seconds to a minute on each side each day.   Like the plank there are many variations and one of the best when you are ready is a side plank with leg lift: https://rutheburke.files.wordpress.com/2015/05/side_bridge_abd.jpg
    Static Lunge – Lunges are another primal movement pattern, and there are many different variety of lunges.  A static lunge is done with feet in a split stance like this:    https://www.google.com/imgres?imgrefurl=http://thefitnesslink.uk/exercises/static-lunge/&tbnid=J1sOV9EYH0PmVM:&docid=lgeVWz3ThLe7OM&h=1417&w=1890   
    The exercise is fantastic for simultaneously developing strength and mobility in the foot, ankle, knee and hip.  Best done barefoot on a firm surface.  Keep your front heel down the entire time and rear foot is up on ball of the foot with rear knee, hip, back and head kept in alignment the entire time.    Do 10 reps at a time on each side per day – no weight is necessary. 
     
    Side to Side Skater– This exercise develops hip mobility including providing an excellent dynamic stretch/warm-up for the adductor (inner thigh muscles).  Feet should be wide apart with feet facing forward – not angled out. Keep feet flat on the floor and flex forward at the hip keeping back straight (only flex forward as far as you can while maintaining a flat back and keeping both feet on the floor with entire foot kept down in contact with the ground).   Push the hips directly to the side and pause as you feel a stretch in the trailing leg’s adductors.  
    Ideally your head and torso stay perpendicular to lower body and centered during the entire exercise just like a speed skater.  Then push your hips back in the other direction to the other to the other side.    NOTE:   Do NOT go up and down – your hips should go back and forth in a straight-line parallel with the floor.   Do 20 – 30 reps each day.
    Ankle Circles – This exercise improves ankle mobility and is great before just about any activity.    Stand on one foot.    These can be done seated, standing or lying down – best done standing to simultaneously work on balance and stability.  The action is simple:  holding foot and leg in the air draw a circle with your toes for 10 circles in one direction and 10 circles in the other direction like this:  http://web.eccrsd.us/christy/public/athletic_training/ankle_sprain_rehab_beginner_files/Picture%201.jpg   
    You will notice that one direction is much harder than the other and you will feel much less coordinated and same thing with one leg vs the other leg.  Do more repetitions in the direction that is challenging and more on the leg that is more challenging.  Ideally do the exercise while you stand on one foot while you pull your other leg up with knee bent so that your thigh is parallel with the floor.    This is more challenging than it looks but will provide big benefits in terms of balance and stability.

    Done daily and before workouts these 10 exercises will provide big benefits including improved posture, stability, strength and mobility.   You will also notice that you improve at many other exercises and movements.

    Paperless Mission #12: Collecting Student Work

    This is the twelfth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

    Mission #12: Collecting Student Work

    Recently, I shared how I distribute student assignments through Dropbox. Today I’m going to share how students turn in those assignments. To do that, I primarily use Edmodo.

    Once you’ve created an assignment in Edmodo, students will be able to see it as they log-in.

    If it’s just a text-based assignment, they can type the text in the comment section and submit it.

    Often, however, my assignments tend to require them to include an attachment of some sort. These can fall into a couple different categories.

    Photos & Movies

    The Edmodo app allows you to load photos directly from your camera roll as an attachment. Just select “Attach: File.”

    Documents produced in other apps (e.g., Pages, Keynote, etc.)

    This process has a couple extra steps, but it’s still easy to accomplish. First, students will need to load the item into their backpack. This is normally accomplished through the “Share and Print” option in the original app. For example, in Pages, you have the option to “Open in Another App.”

    This will result in the file being added to the student’s Edmodo “backpack.” Once it’s there, students can attach it to an assignment by choosing “Attach: Backpack.”

    Once the items are selected, students get to rate the assignment using the emoticons and click “Turn In Assignment.”

    From my perspective, it’s a dream. I don’t have to worry about receiving “No Name” papers, and I can quickly grade and comment on student work that’s turned in.

    Apprentice Guides

    One of my back to school projects is to make step-by-step tutorials to help students (and teachers) with some of these iPad tasks. The first one is on Turning In Assignments from Pages to Edmodo and you can download a copy of it here.

    I apologize that the image quality isn’t perfect — it lost something when I uploaded it to Google Drive for sharing, but it’s still very functional. (I’ll share higher-quality imaged versions later when I get more completed.)

    What programs do you use to collect student work electronically in your classroom? I’d love to hear in the comments section.

    WORKOUT ANYTIME on FOX 56 Lexington

    WORKOUT ANYTIME on FOX 56 Lexington

    Head Trainer Carl Flotka of WORKOUT ANYTIME Lexington was recently featured on FOX 56 Lexington. In the segment Carl talks about how to portion control during the holiday season and highlights a few exercises that viewers can do to stay active.
    View the full segment here.

    Mt Trip to Manila, Philippines cont……..

    I returned to Colombo on the 19th morning without any delays. On the way I met one of my colleagues at Bangkok airport and that helped pass the time as well as chat on the plane.

    I found an interesting article on the web regarding “don’t know that you don’t know” I found the article to be spot on and very helpful in understanding this phenomenon. http://www.doceo.co.uk/tools/knowing.htm Now I can start to develop some strategy to work around this problem so that I am better prepared to face such an issue the next time around.

    I finished documenting the results of the workshop in Manila and sent the results for comments from the client. I am still waiting for the results. Hope I am able to finish this assignment this week as it has the potential to get delayed and get ugly.

    In terms of my future travel plans there are no assignments where I need to travel overseas at present. The assignments I have lined up are in Colombo. However things can change very quickly.

    Franchisee Profile: Marc Flame

    Franchisee Profile: Marc Flame

    Marc Flame is originally from the Bronx in New York, specifically Riverdale. Growing up, Marc spent every summer on Long Island at his grandmother’s beach house and loves the outdoors. After graduating from JFK Highschool, Marc’s parents moved to South America where Marc learned to speak basic Portuguese. After living in Brazil for a while, Marc moved back to New York where he attended New York University. He graduated in 1981 with a degree in Economics and International Business. Upon graduation, Marc spent much of his time on Wall Street starting his career Bankers Trust Company. Marc eventually became Chief Financial Officer at the banks Technology subsidiary. During Marcs’ tenure he established a successful record of improving operational efficiency and profitability. After fourteen years at BTCo, Marc left and joined Citigroup. Marc spent ten years within the Finance Organization of Citigroup. He then joined the CBS Corporation where he served as CFO of the CBS Technology organization.

    After doing some traveling, Marc decided to relocate from Chicago to Atlanta where he began researching franchises to invest in. After much research Marc decided that Workout Anytime was where he wanted to be. Not even three weeks after watching the Workout Anytime franchise video, Marc signed for his first franchise. He now owns the first Workout Anytime located on the South side of Atlanta.
    How did you learn about the brand? 
    I was researching different franchises and was heavily focused on the fast-food industry when I came across Workout Anytime. I watched the franchise video and was immediately hooked. I knew right then that was what I wanted to invest in. Not even three weeks after seeing the video I met with Randy the entire senior WOAT team. It felt like a family and I signed with Workout Anytime after that meeting.
    Why did you choose an opportunity with Workout Anytime? 
    I’ve always wanted to own my own business. I worked at a Baskin Robbins in high school and it was some of the best times I’ve ever had. I have always enjoyed doing my own thing which is why I started looking into franchises. I chose Workout Anytime because I am very interested in the Workout Anytime model and I really wanted to do a franchise in a market that really needed it. 
    Do you have any development/extension plans? Add units? Timeframe? 
    I would like to eventually expand. I do not have a multi-unit sign at the moment, but the goal is to have 3-4 locations within 4-5 years. I am trying to open one every year and a half. Currently, I am working to be the most successful location rather than building out more units. When you talk about franchises people have glass ceiling expectations with what you can achieve with any one location. The Workout Anytime model allows me to push the boundaries, and ensure the opportunity for many members to enjoy all the advantages provided to Workout Anytime members.
    Are you involved in any charities or involved in the community in any way? 
    I am learning more about the Riverdale area each day and would love to work with charities and get involved with the community once I get to know it better.
    Do you have any other interesting hobbies or passions?
    I love spending time outdoors. Anything outdoors such as going to the horse stables with my daughter, 
    watch my son dirt bike on the trails, and go to the beach as often as possible.

    Solving the Weight Loss Puzzle Part 1

    Have you tried to lose weight and failed? If so, you are not alone. 95% of the people who try to lose weight fail to reach their goal, and even less are actually able to maintain their weight loss once they achieve their goal. Obesity and the associated disease diabetes are increasing exponentially in the America despite the many published health warnings about the health risks associated with being overweight.
    Why are people unable to lose weight? People are hopelessly confused about the factors controlling bodyweight regulation. This is not surprising when you understand that every single program, book, and guideline developed by various diet “experts”, including our own government, lacks crucial information, contains misinformation, or contains myths. The list of experts and programs seems endless: Dr. Atkins, Dr. Andrew Weil, The Pritikin Diet, Sugar Busters, Protein Power, Dr. Dean Ornish, the Paleo Diet, the Ketogenic Diet, and all the rest. To make matters worse much of the “information” from different experts seems to be completely contradictory.
    Take this short True/False quiz to see how much you really understand about controlling your weight and bodyfat levels.
    Eating a low fat diet is the key to losing weight
    Eating a low carbohydrate diet is the key to losing weight
    Most obese people have a slow metabolism
    Obesity is a genetic disorder
    Some people have a slow metabolism and some people have a fast metabolism
    Exercise is not really effective for weight loss
    You can eat all you want and lose weight if you do not eat carbohydrates
    Low carbohydrate diets are unhealthy
    If you eat foods in the right combinations you will lose weight
    The key to weight loss is eating healthy not counting calories
    Americans are eating more fat than ever before
    Americans are eating less fat than ever before

    Sound familiar? It should. All these statements have been made by various “experts”. Unfortunately, all but the last one is FALSE. If you want to control bodyweight you have to understand ALL the factors that govern bodyweight regulation and how they apply specifically to you. Stay tuned for part 2 of this article to learn more!

    My Next Assignments…………

    Never have I experienced a hectic period leading up to an assignment like the past few days. I returned from my assignment in Vietnam on the 3rd of February. I was supposed to leave for Indonesia on the 8th for another assignment. However the client was not able to process my visa on time and the assignment was cancelled / postponed. During this period I had to finish 6 Organizational Capacity Assessment Reports. So I was running around trying to process my visa as well as trying to complete the reports before I left for Indonesia.

    Once it was clear that I was unable to go to Indonesia I was requested by 3 more clients to submit proposals. One assignment was in Bangladesh and it went very fast; I have already set the travel dates, booked the tickets, got my visa and everything is a go. The other in India went very quick even though I had to finish contracting, setting the travel dates, booking the ticket, and getting my visa to be able to start the assignment in India on the 21st.

    The other is indeed a nightmare! I have been discussing with this client since October of 2009. Well believe it; some times a contract can take even longer. I have already done 5 versions of the proposal; and the last. This kind of procrastination by a client signifies all or some of the following:

    • The client is not clear about what they want
    • They are haggling about rates and costs
    • The client is unsure about you and the organization you represent
    • Does not know / have the resources / decision making power to use the results of the assignment

    I must say that this client does not know me and the organization. That is why I went through the process of doing 5 versions of the proposal. However now I know it is to do with the rates and costs. This has a critical issue that most consultants do not see; which is the client is likely to not be satisfied with your work no matter how well you do your assignment. This also has the possibility to creating a problem when collecting final payment for the assignment.

    My advice (which is what I am doing right now) is to stop doing anymore changes to the proposal and wait for the client to come back to you with a contract with any changes that they feel are important. This way you push the client towards closing (sales cycle) and stop you from spending time (which is money) on an order which may not be profitable.

    Spotted in a hoarders driverway

    the front yard was covered in a variety of junk.

    Just run across this while out walking about. I think behind it’s a Corvette, and in front of it was a 1990 is Firebird GTA 

    WTH ? How do both front tires blow up simultaneously?

    for the original version, click though on the video below, which will only play on youtube itself

    After a review, the team discovered a suspension arm defect led to the entire right front upright collapse, which snapped the wheel tethers and created the dramatic effect

    Spending Your Money Wisely with Quality Food

    Wherever possible, it is best to grow your own food. This is a help with the family budget. But many excellent articles of food may not grow well in your particular locality. They must be brought from a distance and exchanged for cash. If you are on a limited budget, how can you spend your money for the greatest value in food? This is a very practical question.

    Foods which are manufactured and refined usually cost much more than those in the natural state. At the same time there is danger that some of the minerals and vitamins have been lost in the manufacturing process. In such a case you lose out in two ways, first, by paying much more for the product, and second, by the loss of essential elements from the food. This is not a wise way to spend a large portion of your money. Do not be carried away by all the glowing advertising material on the package or container.

    Take the question of breakfast cereals so widely advertised today, particularly those flakes that have been coated with sugar. Such breakfast food is scarcely worthy of a place on your table and in your family budget. Dry cereals in any form offer less nourishment than do the raw materials from which they are made. Much of real value is lost in the manufacturing process. And when a sugar frosting is added, the effect on young children is far from good. That sugar coating is the worst feature of all. This excess sugar increases the possibility of dental decay and often results in chronic indigestion as well.

    Diet Start

    Cereals and similar products that are cooked at home are much less expensive than those that are already prepared. The same is true of breads baked at home. They, too, are more nutritious. It does take time to prepare such food. But in the end this saves money, and the whole family will be healthier and more satisfied.

    People in well-to-do households may not have much trouble in selecting an adequate diet, provided they take the time to do so. Unfortunately, most of them do not bother. They just eat what comes their way or what is advertised over radio or television. This haphazard way of living is likely to result in serious deficiencies.

    The family with limited means must be even more alert to the problem of selecting a diet that is suitable, but not too expensive. They must not allow themselves to be swept away by the flood of advertising so prevalent today. They must buy wisely and well.

    Those who live in the country may find the situation a little easier. A small garden, with a few hens and a cow, may enable such a family to live far better than one whose means are not limited. Everything depends on the choice that is made.

    Actually you can feed your family better than you think you can. But it does take a little planning. However, people who live on a well-balanced diet are naturally happier and healthier. Such a diet need not be an expensive one. In fact, there are many experiments in rats and other animals showing that a less liberal diet tends to promote a longer life. Many modern nutritionists believe that we live on only about half of what we eat. The rest only compels our hearts and other organs to work that much harder to get rid of the extra food.

    Experiments at Cornell University seem to bear this out. A certain number of white rats were used. Some were allowed to eat all they wanted whenever they felt like it. Others were placed on special diets when they were in a rat’s “middle age.” Those rats which ate as they pleased lived 600 days or less. Those on the diet in middle age lived over 1,000 days. The oldest rat lived 1,400 days, and he never had a square meal in his life! It is not the quantity of the food, but the quality, that counts.

    Planning Better Meals

    Some people become confused over such scientific terms as calories, vitamins, minerals, and so forth. This is quite understandable. But don’t let this scare you too much. Today you can balance your diet fairly well without knowing very much about these various terms. Without going into too much detail, you can reach a good middle-of-the-road plan that is almost foolproof.

    During recent years nutritionists have worked out what is known as the “basic seven” food groups. If these foods are included in the diet each day, they will meet the needs of the whole family very well. One does not have to bother with all the endless details of a complicated diet. Just follow this basic plan.

    These seven food groups are easily recognized. They should become the foundation of each day’s meals. Some foods from each should be in one meal, others in another. But these essential things should always find a place at some time in the day. Other things may be added as desired. But it is best not to get too far away from this simple daily program. If any of these basic groups are missing in your daily planning, your diet is likely to be deficient in some things that are vitally important to good health.

    CONCEPT INTERIOR DECORATORS NYC

    Interior Decorators NYC

    Interior Decorators NYC, there are many different benefits to live. Here, culture, food corners, training, and last but not least, the lounge and bar. If you want to spend a night in the city that never sleeps, then to New York City is a great bar, club and lounge, in particular to go. There are several rooms, and also spread throughout the city. live musicians are the best features of these lounges and bars. You can find indie rock band a lot of volume, and other local bands. Part of the show in New York City, a tremendously well. They are tastefully decorated, and the crowd, which is very appealing. These amazing living space in this late night to win the House, hip hop and youre likely to find one that will fit your musical taste.

    They offer large crowds and expensive liquor and very elegant. The interior decoration of these rooms are for lights, big boost mood of the series, in fact, people also benefit from seeing the crowd warm with loud music and too much light. Interior Decorators NYC always find some very funny and what’s better than a bar, club lounges and especially where you can make your night of fun. Once your stomach is full with the best drinks in the theaters of New York, then is time to rock and roll music and if so, what better than a living room and also in New York, where fun begins.

    In addition, these shows are also very useful during the time of the wedding reception. People are now tired of planning parties in hotels and other places. now part of wedding reception is poured into large halls, where people enjoy the maximum level. New York reception halls are simply incomplete without drinks. Here you can plan a cocktail, and also a bachelor party incurred prior to marriage. You can enjoy unlimited drinks which is great taste and you can also enjoy the loud music here. This part of reception or a cocktail can be fun with friends and other relatives. You know some reception includes dancing and fun, and this is the basic ingredient and that is what makes a great party for everyone. It is therefore the reception of the show is so famous in Interior Decorators NYC.

    Interior Decorators NYC
    Interior Decorators NYC

    It’s Not Just You™ – Paladins (Beta), Having Issues Not Starting or Not Running In 64-bit Mode, Battlegrounds [Notification, Updated As Encountered]

    [Currently, this post is mostly in Text-Only Mode, to speed up the ability to publish it… 
    I may return to add some Images and/or Screenshots in the future.
    This post will be Updated for the next few days, as I encounter new related information.]

    If you are trying to play the newest addition to Paladins, Battlegrounds, which is being released in Alpha Testing Stage in their Latest Update – and you are having issues with either (1) the game not launching/starting or (2) the game running in 32-bit mode [which stops you from being able to enter the Battlegrounds, which requires 64-bit mode] – just letting you know, It’s Not Just You™…

    For the past little while, I have been trying to get into Paladins and try out this new Game Mode, and take a look at any new changes; but I have been running into multiple issues with the game itself. If related Paladins Forums ‘everywhere’ (Steam, Reddit, Official Forums, etc) are any indication, many, many others are having issues as well.

    I wanted to take a moment to make this posting because, even though it seems there are a few people that have ‘gotten it running’, there are many others, like me, that have not. I wanted to share this experience and related information, so that others may know that, well… It’s Not Just Them.

    Since I have run into multiple issues and have tries multiple steps so far, I will share them here in Point Form as a list:

    Issues Seen/Encountered:

    • Game not starting [Launcher will start, but game itself will not show up]
    • Game not stopping [Game will not Terminate, Steam says it is Running still, but it is not, or has not started]
    • Game not running in 64-bit mode [Game starts in 32-bit Mode and therefore The Battlegrounds can not be tested/run, as it states in-game “64-bit Mode Required”]
    • Cannot Verify Integrity Of Game Files, via Steam [Steam states to ‘exit any game files or tools’ related to the game, but none are running]

    Steps Taken/Tried:

    • Put “-Use64 [without quotes] into Optional Game Command Line Parameters (Options/Commands) in Launcher
    • Put “-dx11” [without quotes] into Optional Game Command Line Parameters (Options/Commands) in Launcher
    • Checked “Use 64 bit Client” in Launcher Options [this has never been ‘unchecked’ by me]
    • Verified Cache [‘double-checked’ the game files through Steam, to see if they are what they are supposed to be]
    Unfortunately, since I cannot make the game ‘run in 64-bit Mode and enter The Battlegrounds’ in a repeated a reliable manner – I cannot make a section containing a ‘Fix’ at this time… I will continue to observe various Forums and Support Responses, try various Suggested Steps (from the Developers and other helpful Paladin Players (there are a lot of them out there!)), and see if I can make any progress that results in stable and repeatable game launching and gameplay. If I do, I will return here and add it as a ‘Fix’ section. 
    For now, despite them not working for me/on my system, there are a few isolated people that have had success with some of the Steps listed. If you are experiencing any of these issues with Paladins at this time, try some or all of them above. Perhaps one of them will work for you, too. 
    Good Luck with it – and try to stay positive, remembering – It’s Not Just You™!

    Battlefield Play4Free – PlayTesting The XM8AR LMG (3 Full Rounds – Myanmar, Dalian) Raw Gameplay [Unedited] Gameplay Video

    Battlefield Play4Free is a Free-To-Play title, where it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money by purchasing Tokens (now called Play4Free Funds) that you can then use in the in-game Store. There is also a nice feature where you can win prizes (weapons, armor, clothing, etc) from a game called The Daily Draw, where you choose a card from a random draw of eight and it will generate an item for you.

    The items range from temporary one-day use weapons and clothing, to seven day usage, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future.

    I recently won the XM8AR in The Daily Draw (for one day of use) on my Medic and thought I’d try it out and see how it felt and quickly write a post about it [I’ll call these PlayTests]. I am not a gun expert or know a lot about the statistics of the guns, but I will discuss briefly here how the gun actually feels and plays, especially compared to the Medic default, the MG3 Light Machine Gun. I played a few rounds with XM8AR LMG and recorded the first three full rounds. Here they are, shared unedited for you [a ‘Raw Gameplay’ video]:

    Recorded with: Bandicam @1080p (HD) using the x264/H264/AVC Codec
    Recorded game: Battlefield Play4Free (MMOFPS, a F2P game/Microtransactions)
    Recorded levels/maps: Myanmar (Jungle, Assault), Dalian Plant (Rural Industrial Port, Defense then Attack)

    [YouTube did something with the Aspect Ratio of this video and I had to use a command in the Tags section to fix it. Let me know if anyone has problems viewing this video properly]

    Normally locked until Level 15, the XM8 felt great to use on my Level 10 Medic. It’s ammo box is a little smaller at 60 rounds (vs. the default Medic’s MG3 having 80 rounds), but it never felt ‘cramped for shots’ and didn’t feel like it took too long to reload.

    The XM8AR Light Machine Gun is normally locked and cannot be used until your Soldier is Level 15, unless it is bought outright or won in The Daily Draw. Click to see Full Size

    The nicest thing about the XM8 was the accuracy. You could really tell you were going from the “Low” rating of the Medic Default MG3 to the “High” rating of the XM8AR.

    Comparison of basic stats between the default Medic gun, the MG3, and the XM8AR

    Looking down the sights, the three-prong irons of the front sight are quite thin and easy to line up in the view of the rear sight, which is in the form of a circle. There is only a little bit of a pull up and slightly to the right, but the recoil is very small and easy to compensate for once you get used to it. I even felt comfortable shooting from the hip and at a distance because this gun felt so darn accurate compared to the starting weapon for a Medic.

    The thin front prongs of the iron sight feel easy to line up for targets farther away and the XM8AR feels like it is very accurate, as can be seen by this Headshot from across a courtyard in Myanmar. Click to see Full Size

    An all around great gun, it was fun as hell to use for a day. For only 300 Credits you can try out for a day of play, too. If you have 1250 spare Play4Free Funds you can purchase it permanently. It is a nice accurate gun to run with and may be worth it. Try it out for yourself sometime.

    Have fun and See You In The Game!

    Disclaimer: Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material. This information exists for entertainment and educational purposes only and is not a substitute for medical attention.

    Back to School – Math Edition

    It might be time to think about renaming my blog, because I’m really excited about teaching math this year! It all started when I read the book Number Talks over the summer.

    I’ve always understood the importance of mental math and computation strategies, but I’d never really understood how to teach it. It felt like something kids either had or they didn’t. This year, however, I decided that we’d start doing number talks from day #1, and I’m already blown away by how my students are developing as mathematical thinkers. They’re able to solve complicated addition problems in their heads — no paper allowed — and they’re articulating their strategies well. I’ve been introducing a new strategy every 2-3 days, and it’s been awesome. We’ll be moving on to subtraction strategies in a few days, and I have high expectations for that to.

    To help students with the mental math strategies, I made a set of posters that describe each strategy with an example of how it works. There are 20 posters in all — one for each strategy described in the book.

    The complete set is available in my TpT store, and they’ll be on sale for 28% off this weekend as part of the Teachers Pay Teachers back to school sale if you use the code BTS13.

    As I’ve been working on order of operations and number sense with my fourth graders, I also introduced the four fours problem. The premise of the problem is this:
    Using some arithmetic combination of four 4’s, can you write an equation for each of the numbers from 1-100? Here are the rules:
    • You may use any combination of addition, subtraction, multiplication, and/or division
    • You may combine numbers, e.g., use 2 of the fours to make the number 44
    • You may insert decimal points
    • You may use a four as an exponent
    • You may use square roots
    • You may use factorials, e.g., 4! is equivalent to 4 x 3 x 2 x 1 = 24
    • You may use overbars to make a decimal repeat
    • You may NOT use any digit other than a four
    • You MUST use all four 4’s in each solution

    Before I go on, let me give two caveats. 1) I didn’t expect all of my students to be able to handle all of these rules. Square roots, exponents, and factorials are WAY above my fourth graders heads generally, but I did have a handful that could handle it. And there are plenty of solutions to be found that don’t require those operations. 2) This problem freaked out the parents more than it scared the kids, I think. I had a few panicked parents that I had to talk down while we were working on this, but in the end, it was well worth it. My students were so excited about math and problem solving as we worked through this problem. It was homework each night to try to find a few more solutions, and then we’d add to a chart during math class. Look at all that my students accomplished after just two days!

    We’ve filled in a bunch more solutions since then, but of course I left my camera at school this weekend…
    Finally, in honor of the big back to school sale on TpT, I’ve bundled four of my favorite math resources into a back to school math pack for this weekend only. 
    Sold separately, this is $17 worth of products that I’m selling this weekend for $10, but after Monday, the bundle will no longer be available in my store. So if you’ve had any of these on your wish list…

    Hope everyone had a great week! I’m still learning how to juggle grad school with teaching, but I’m hopeful that I’ll still be posting at least once a week.

    Off to start catching up on blog reading and filling my cart for the TpT sale! Have a great weekend!

    Franchisee Profile: Bill and Bob Aicklen

    Franchisee Profile: Bill and Bob Aicklen

    Bill Aicklen and his brother Bob, who is currently based in Texas, will be opening their fifth Workout Anytime gym in May. The brothers opened their first gym in Decatur in November 2009; bought the company’s flagship store in Dunwoody in 2012; purchased the brand’s first franchise location in Douglasville in 2013, and built their fourth store in Rome in June 2013. 

    Bill, 63, received a Bachelor of Arts in philosophy from Old Dominion University in Virginia, and landed his first job in the banking industry working in the operations and financial systems department. From there, Bill moved on to spend the next 30 years of his career in the computer software business, performing various roles including post-sales, training and support. 

    In 2006, Bill decided that he wanted to get out of corporate America and Bob, who was interested in investing in businesses, invited Bill to manage the operations. 

    The first business that the brothers partnered in was an express oil change franchise. They built and operated two stores in Woodstock before selling in 2012 to focus their time and effort on Workout Anytime. 
    How did you learn about Workout Anytime? 
    We were looking for other business opportunities, and Bob came across Workout Anytime on the Internet. A business broker also presented the concept to us. 
    Why did you choose an opportunity with Workout Anytime? 
    From a franchise standpoint, it’s an easy business to get into; it’s simple. There’s not a lot of moving parts and you can staff the gym with just one or two people. Also, we both have strong customer service backgrounds and understand the importance of hiring the right people and providing excellent service. 
    How has business been since joining the brand? 
    We have between 1000-1700 active members at each location. Since we took over the Douglasville store and invested money into upgrading the equipment, we have turned it around. Our club in Rome is based in a small city with very little competition in terms of big name brands, and we have been very successful there. I expect Suwannee to also do well because it’s in a highly concentrated residential area. 
    Are you involved in any charities or community outreach?
    We localize our charity work depending on the club, and we usually donate free memberships for silent 
    auctions. We also partner with Red Cross by allowing them to park their blood drive buses in our parking lots every quarter – the next drive will be in Douglasville at 3pm on May 12. We have also previously put buckets in our gyms for people to donate pet supplies for the Humane Society.

    Teenager’s Room Artist Theme

    Teenager’s Room Artist Theme

    Teenager’s Room Artist Theme

    “Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Starts Again Today! [Updated 2018-02-01 – Answer Image]

    It’s the 15th of the month – and it is time for something that I want to start up again (and not only because I have over 50,000 Screenshots burning a hole in my pocket, but mostly that) – something that I had going for a short time, three long years ago…

    The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

    “Can You Guess Where The Screenshot Below Is From?”

    (A Game Screenshot Identification Contest)

    Having a ‘grand re-opening’ once again today – January 15th, 2018!

    All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
    below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

    1. Your guess for the game the image is from.
    2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
    That’s it!
    **[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


    Correct answers submitted by the end of the month (beginning at the time of this posting) will be chosen from randomly, where one Skillful Identifier will receive this month’s contest prize – which is: a gifted game from the Steam online store!

    [Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
    due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
    of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
    Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

    Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

    Can You Guess Where The Screenshot Below Is From – Contest #1
    Can You Guess Where The Screenshot Below Is From – Contest #2
    Can You Guess Where The Screenshot Below Is From – Contest #3

    Are you ready? Here then, is the Screenshot image for this month, below:

    [As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    Update!

    A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the Screenshot for this month’s Contest)! Ready?

    Here is the HINT image (with enlarged portion revealed), below:

    [Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is a larger portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

    Update!
    It has been two weeks since the Contest began and there have been no correct submissions! Aww….

    To end The Mystery, here is the answer for this month’s edition of
    ‘Can You Guess Where The Screenshot Below Is From’ (2018-01):


    The Answer for this month’s Contest could have been: “Marvel Heroes” or “Marvel Heroes Omega” or “Marvel Heros” or “I can’t believe they cancelled this great game that I only just recently discovered existed especially with all the future Marvel movies coming out what happened this timeline sucks”. Click to see Full Size

    Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Fifth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

    See You In The Games!


    (The Game Tips And More Blog Contest Game #2018-01)

    Fads Pose Dangers, Don’t Listen to Dietary Fads

    However, we need to be careful on this question of diet. Many different ideas are prevalent today. Don’t believe all you hear. There may be some elements of truth in a few of these dietary fads, but usually there is some foolish notion hidden underneath that is neither in harmony with science nor with common sense. Don’t be misled.

    Regardless of the many fantastic claims that you may hear, there is no one perfect food. There is none that will meet all the needs of the body any more than there is one perfect material that will serve every purpose in building a house. The best diets are those in which there is plenty of variety. Then if any particular element is lacking in one food, it may be amply provided in another. This is one excellent way of avoiding deficiencies in your diet.

    Variety is most important. But it is not the complete answer. We must also use discretion in the choice of foods. Some things that may look tasty are not always healthful and nutritious. Foods that are highly refined are less likely to contain the vital elements to meet the needs of the body. Modern food processing may have its good points. But sometimes the vitamins and minerals are lost in the refining process. It is better to use fresh foods whenever they are available. But be sure that they are really fresh.

    Diet Start

    Some people tend to think that malnutrition is a problem among the less-favored classes of the world. While this is true, it is surprising how often those with higher incomes also suffer from a different type of malnutrition. They eat plenty of food, but mostly of the wrong type. This so-called “hidden hunger” is very common in large cities, where more artificial living conditions prevail. Modern methods of marketing are providing a wider range of foods. But far too many people still prefer to live on devitalized foods that are woefully inadequate. It is these devitalized foods that lead to hidden hunger.

    Such diets fail to provide the body with the right building materials that will keep it functioning properly. Foods that contain a high concentration of sugar and other carbohydrates may provide energy, but other important elements are usually lacking. Soon the organs begin to lose their normal powers of operation. The vital processes of the body are slowed down, and a toxic condition develops. The delicate balance of nature is upset, and the whole body suffers.

    It is amazing the amount of food that one person may consume in his lifetime. Someone has estimated that we eat up to 1,400 times our own weight in a lifetime of seventy years! Think of how much money we spend in buying all this food! Surely such an expenditure as this is worthy of our closest study. Are we buying health, or weakness and disease? A balanced diet is the very best type of insurance against those degenerative diseases so common today.

    It is true that diet alone is not the answer to all of our health problems. Other things must also be considered. But a well-balanced diet will always help to restore those body tissues that have been laid waste by serious disease. And what fun we can have while we are getting well again! So much depends on the attitude of the mind.

    Mental Attitudes Important

    Centuries ago the wise man gave us a great scientific truth when he said, “A merry heart doeth good like a medicine.” This is absolutely true. It is the optimistic person who usually makes a good recovery. Because he is happy in himself and confident in the future, his health naturally begins to improve. His whole body responds to the sheer joy of living.

    But the wise man did not stop there. He also added these significant words: “A broken spirit drieth the bones.” This observation is just as true as the other. A pessimistic attitude soon affects the whole body. It slows down the circulation of the blood. It interferes with good digestion. It takes all the joy out of living. In the end, it may so completely change the individual that he becomes old and worn out long before his time.

    Our mental attitudes are very important, particularly as they affect this question of diet. Many of us are shortening our lives without fully realizing what we are doing. Some of us eat too much, often for no other reason than to soothe our injured feelings. Or perhaps we do not take time to eat sensible meals. We grab something and run. We are in too much of a hurry. Then we wonder why we are weak and sick. We do not seem to realize that our diet has much to do with our endurance and also with our ability to resist disease. All the vitamin pills in the world will not make up for the lack of a sensible way of living.

    Millions of people are spending fortunes trying to win back their lost figures and restore their flagging energies. All they needed was to apply a little common sense in the first place. No one can hope to have an attractive appearance, a healthy skin, and a clear mind unless he is willing to use discretion in choosing his meals. Even good foods, if taken to excess, may destroy the vitality of the body. Anything that is overdone may cause trouble, even too many vitamins.

    A balanced diet is the very foundation of good living. To keep the body functioning smoothly and efficiently, it must be supplied with a constant stream of essential nutrients. This must be clear to all. Yet, it is a shocking fact that many farmers and dairymen are more interested in how they feed their cattle than in how they feed their children! Of course, it pays to see that cattle are well fed. But isn’t it time we begin to think about ourselves and our children as well?

    Today, thanks to modern medical discoveries, we have less to fear from serious infections. But degenerative diseases are becoming more frequent on every hand. How can these be avoided in your own particular case? This is something you should feel free to discuss with your own family doctor. He is the best one to advise you on such matters. But there is no question that a good, sensible diet will always help. And when we follow such a program, we will feel stronger and more energetic, our mealtimes will be happier, and we can look forward to enjoying better health for years.

    Food Repair Guide: Baking Part 2

    Swiss roll

    If you are making a Swiss roll, then line the tin with greaseproof paper, but do ensure that you grease the paper well before pouring in the mixture. Try also to ensure that the oven shelf is level or all the mixture will run to one side. If it does, all is not lost, although it will be rather difficult to roll. When you turn the Swiss roll out, do so onto a tea cloth or piece of greaseproof paper that has been coated well with icing sugar. If not well sugared, the Swiss roll will stick to the cloth or paper and you will have a terrible time rolling it. If you have not greased the paper properly, you will also have a terrible time peeling it off, but patience will usually win the day. Do not worry if the roll is not entirely perfect. As long as you can keep about one third of it intact, that will do for theoutside and no one will see the inside. Dredge it thoroughly with sugar or icing sugar. Or, if it has really fallen apart, pre-slice it before serving so that no one can see.

    Failed sponge cake

    If, despite your best endeavours, your sponge cake, be it light or rich, is dry, crumbly, flat, lumpy or generally unappealing, do not throw it out. If you are desperate for a complete cake or dessert, cut the sponge into very thin layers, sprinkle each with a little liqueur if for a dessert, and layer very generously with filling so that the cake gets smothered. Then top or ice equally generously and no one will ever know. If you do not need the cake too urgently, keep it to make trifles, tipsy cakes or anything that needs a sponge base. Buried deep enough and soaked comprehensively enough, even the most revolting cake will become quite palatable. Alternatively, crumble it and use it as a topping. When toasted, the crumbs can be used as decoration for almost anything in need of disguise.

    Diet Start

    This does not apply only to plain sponges. Orange or lemon sponges would be a delicious base for any cream dessert, chocolate, coffee or even gingerbread can be used as a base for ‘a trifle with a difference’. Indeed, coffee and chocolate cake could be sliced into fingers, thoroughly dried out in the oven and sandwiched together with some butter icing as biscuits. Any of the above could be used as the base for a baked pudding, but remember that the cake will be sweeter than bread or rice so reduce the amount of sugar.

    Failed fruit cakes

    Failed fruit cakes are just as adaptable.

    Rich fruit cakes often get old and dry out. Do not abandon them to the birds. Cut deep slits in the top of the cake and feed with a mixture of brandy and sherry, or, if you do not want to be too alcoholic, a fruit wine or good fruit cordial. The amount you give the cake will depend on how dry it is, but you can always cut it in half and test the middle.

    The same principle can be applied to lighter fruit cakes although one needs to be more temperate. A large quantity of fruit will soak up the liquid and make the whole mixture moist but sponge will merely become soggy, so the greater the proportion of sponge to fruit the less liquid it should be given. It is usually better to ice the cake after it has been — to conceal the tell tale signs.

    If a rich fruit cake really is dry beyond redemption, break it up in a bowl, add some suet and a goodly measure of liquor, leave it to soak for 24 hours, then squash it well into a bowl and steam it as a Christmas pudding. It will be a little crumbly and somewhat lighter than the standard, but many people prefer it that way!

    Icings

    The disaster-prone cook should steer clear of all but glace, butter and royalicing — fondants and their kind are for those with time and expertise to spare.

    Glace icing

    Glace icing is quick and simple but messy. It is not easy to get the proportion of icing sugar to liquid right to achieve `spreadability’ without `runability’.

    Always put whatever you are going to ice on a rack so that the extra can run off without getting stuck in a thick frill round the bottom of the cake. Arm yourself with a pot of boiling water and several metal spatulas or flat knives to smooth out the lumps. Inevitably, the wretched stuff will never quite cover the top of the cake in the first run, and when you add the next bit, the first will have dried and the whole thing will go lumpy. Only practice is going to perfect your technique, but smoothing with a spatula dipped in boiling water does help.

    Always be ready to decorate or disguise the top with something other than icing — even if only gold and silver balls. Grated chocolate is a good alternative.

    Marbling

    Marbling the top, if it is reasonable, will distract the eye from any minor blemishes and is easy and impressive in itself. Run a little melted chocolate, or different coloured icing, in parallel lines across the top of the cake. Then, before it is dried, take a knife point and pull it across the cake top in straight lines at right angles to the first lines, thus pulling the lines into a feathered shape. Try it a couple of times on greaseproof paper before you launch into the cake.

    If all fails and you make a complete mess of the icing, wait till it is dry, then scrape the whole lot off and start again.

    Butter icing

    Butter icing is the world’s easiest, but it is very rich. Many people prefer to use shortening as the fat base, which keeps it much lighter. The only hazard with butter icing is to get enough flavour into it. Like brandy butter (which is, of course, only a butter icing) nothing is nastier than a butter icing that tastes like sweetened butter. Therefore, taste after you have followed the recipe. If you have used a particularly strongly flavoured butter, you will need more chocolate, lemon or whatever you are using. Never try to spread it straight out of the fridge.

    Royal icing

    Royal icing is also simple, using egg white rather than water or syrup to moisten the icing sugar. Add a little lemon juice to counteract the sweetness and do not forget a drop or two of glycerine to prevent it hardening totally. If you do have a cake with unglycerined icing, you would be better advised to saw your way through it with a bread knife rather than to try and cut it, when it will shatter and ricochet all over the drawing room and Great Aunt Ethel. Royal icing can always be broken off and replaced with a new batch. Use a small amount of icing to experiment with the colour.

    ROOM SEVEN LEVITATION HOTEL PARIS DESIGN

    SEVEN LEVITATION HOTEL PARIS

    The Last weekend we were invited to spend a night in the bedroom of SEVEN LEVITATION Hotel Paris … A change of scenery, enchanting, and very pleasant … We’ve tested since the beginning of dozens of hotels – from very luxurious to the simple – but SEVEN Hotel remains one of our fondest memories in terms of wellbeing! We literally left “floating”in this room LEVITATION, amid clouds … Here, the amenities of modern life are available starting with a Nespresso coffee machine with tea and coffee and an iPod docking station to listen to your favorite music in this extraordinary place. You will also find a flat screen TV with 4 channels olfactory delight your senses!

    The room of the hotel LEVITATION SEVEN is also a premium bedding, large shower – where you can shower couple – air conditioning, a desk … So comfortable!

    Above a photo of the room SUSPENDED BATH offering a superb tub suspended, and below a small photo of the ABSOLUTE LEVITATION!

    SEVEN LEVITATION HOTEL PARIS

    SEVEN LEVITATION HOTEL PARIS

    SEVEN LEVITATION HOTEL PARIS

    DESIGN ROOM FOR SCIENTIST/GENIUS TEENAGER’S

    For today, we have compiled a series of five images that represent the Teenager’s Room Scientist/Genius. We try to choose different: we went with serious internal and sober, but also gave him a shot at the famous and very popular brown, and white. All rooms are practical, with work spaces, small libraries and shelving systems for books and CDs and fine cabinets specially designed for Scientist/Genius teenagers.

    Teenager’s Room Scientist/Genius Themed

    Teenager’s Room Scientist/Genius Themed

    Last but not least, we believe that the Albert Einstein Pictures is a required element in the bedroom of a Scientist/Genius teenager’s, although some of the pictures below, you will realize that they have a special status. Even if all design ideas have a particular theme rooms, the furniture is very close to each other to create interiors that are functional and aesthetic. Take a look!

    Teenager’s Room Scientist/Genius Themed

    Teenager’s Room Scientist/Genius Themed

    Guild Wars 2: How To Ride “The Train” of Queensdale (Champion ‘Farming’ Runs As A Group) Tutorial with Map

    [NOTE*** As of April 15th, 2014 the changes to the game with the April 2014 Feature Pack update have altered The Train route somewhat – these changes will be updated in this map and article as they solidify into a commonly-agreed Route…
    FURTHER UPDATES AT THE BOTTOM OF THIS ARICLE]

    Ah, Guild Wars 2… I’m having so much fun with you, I can barely stop to start typing helpful Tips for others to read! Why are you so awesome? Oh, that’s right, your creators and other ArenaNet buddies heard the nighttime wails of MMORPG players from other games around the globe and listened intently to our cries, wanting to soothe us softly by satisfying requests we players have made of all of those other games, didn’t you? Oh, yes you did.  The result: a game I wish I had gotten into a lot sooner… Thank you, ArenaNet.


    For those new to the game (or those who haven’t done this before), in the beginning area of the Human lands of Kryta, there is a phenomenon called “The Train”. After asking a few questions in-game and watching it a while, and then joining in on it off and on, on my own, I feel I can now safely share a simplified Tutorial on ‘The Train’ and explain to others (mainly newcomers to Guild Wars 2) what it is and how to be a part of it, if you wish to be.

    Loading Screen for the Queensdale region, where ‘runs’ of The Train take place
    (Click to see Full Size)

    What is The Train?

    ‘The Train’ in Queensdale is, essentially, a cooperation of players moving and killing together as a group [in an MMO game?Whoknew?lol]. The Train targets a small number of Champion-type mobs [MOBile monsters], killing these same ones in a repeating cycle, again and again. The pattern [the “Route that The Train takes”] has evolved over time and differs little, no matter what server/shard you are on. Traveling and moving in collaboration with each other gives the result of faster kills, experience and loot for all those taking part (and sometimes the groups can get quite large). In Guild Wars 2, one does not need to ‘Party’ or form an ‘official’ group of any kind, in order to benefit from conquering enemies together [even when not following The Train]. Merely join alongside and help out a bit, and you too are now part of the Clique of Killing and can reap the rewards.

    Even though The Train runs in the first leveling/adventuring area of the Humans (called Kryta), you can play any Race you wish, and then run/travel to the Human lands and be a part of The Train. There are no restrictions on Race interaction (no ‘sides’; no factions, no clans, no tribes [to restrict players]) in Guild Wars 2. Any race can be created and interact with any of the other Races in Guild Wars 2. So, be whatever race you want to be, you can still head to Queensdale and get on The Train!

    When ‘on The Train’ (following the group around and helping to kill the Champion monsters), you do have to be a high enough level to ‘hit’ the enemies in order to register as a ‘contributor of the group’ and benefit from the encounter (get experience, be able to loot, etc). With the Champion mobs being ‘farmed’ [by The Train] averaging Level 10 in this region (these are the only mobs that The Train goes after, remember), you may not be able to actually hit them until your character is about Level 7 or 8; so if you are playing a brand new character, do some starting Quests, World Events or your character’s Storyline for a bit first.

    Killing the Boar champion while on the Train in Queensdale
    (Click to see Full Size)

    If you are a ‘Brand New’ Player to Guild Wars 2, I strongly suggest doing that for the most part anyway (Quests and Storylines), as doing so, you will more easily learn how to control your character, fight battles, use your skills as you learn them, and learn to navigate the territories and develop your character as a whole.
    The Train is, for the most part, a repeated cycle of killing [almost absolutely nothing but] a small number of Champion ‘boss’ style monsters (as in 5-6 of them, depending on the route The Train takes on your Server/Shard, remember it differs little) – and there have already been arguments all over forums and other websites as to whether relatively New Players should take part in it at all (and if it harms the gameplay/environment of newer players). I believe that this decision is up to each individual, as some people might eschew the practice completely until Level 80 (the current maximum level as of the time of this post), while other people will love the camaraderie and easy access to loot (you always get items comparative to your current level, whatever that may be, when the Champions die).
    As with any game, there will always be people that will say a certain activity is too repetitive and boring, and there will always be people that will say it is a good source of ‘loot’, and there will always be people that will advise doing something else (like playing PvP or more PvE). I like to suggest, if people ask, that each person try Taking A Ride On The Train for themselves at least a few times, then judge whether they wish to continue doing it or move on to other things, leaving the choice up to each player.

    [On a personal note for a moment, merely to address this matter that many people seem to argue about and state my own personal opinion, I myself enjoy roaming the lands of GW2 randomly, helping out NPCs and doing the little events found around the world. I play usually always play solo and that affords me the ability to change it up and do whatever activity I want, stop whenever I want (or if I get too tired physically and have to stop, due to my illness) and roam around taking [way too many] screenshots of the environs, gathering resources as I leisurely explore and discover the countryside. I often forget about the Storyline for my character – there is so much to do in the world; but I try to get in on it as I remember to and develop my character along with the story that is tailored for each Race. I do take a ride on The Train, but only as a ‘something else to do for a change’, not as my ‘main leveling mechanic’ or my ‘main source for items’. I like to think this off-and-on approach allows me to enjoy The Train while not getting too bored of it too quickly, all the while being able to enjoy the game at the same time, and it is just ‘another thing that I can do’ in the huge game world of Guild Wars 2.]

    Killing the Troll champion while on the Train in Queensdale
    (Click to see Full Size)

    How does one ‘get on’ The Train? 

    First, I always suggest to others, to get the Waypoints that The Train uses first. This will allow you to quickly relocate and follow The Train, travelling to the next Champion that is to be killed. If you did not create a Human, travel to The Human Lands and simply run to the Waypoints to open them up on your map and register them so that they can then allow you to return to them/use them in the future and for Riding The Train.

    Don’t worry, there are only three main waypoints used in The Train’s generally-used rotation (and it differs only slightly on some servers/shards [for instance, on Eredon Terrace, “The Bandit” is very rarely killed by The Train – which seems to be the main difference for The Route from other shards – however, since I have created my character on ET, this is the example I will use]). The waypoints used and the route generally taken are all shown in this graphic I have created of the map of Queensdale below.

    The Game Tips And More Blog’s Map of Queensdale and The Train Route as of April 2014 [Old Version]
    (Click to see Full Size)

    The Route that The Train takes usually runs like this (repeatedly):

    • Begin the Route from the upper right [the Double Orange Arrows on the map I created, above]
    • Kill the Boar champion in the hills there, NW of the Hunting Lodge
    • Fast Travel to the Vale Waypont and head into the caves just to the west
    • Kill the Troll champion inside the caves of Altar’s Windings
    • Fast Travel to the Phinney Waypoint and head NW to a glade at the edge of the trees
    • Kill the Rotting Ancient Oakheart champion at the forest’s edge
    • Fast Travel to the Krytan Waypoint and head NE, towards two large hills
    • Kill the Forest Spider champion on the larger hill, SE of the Hunting Lodge in a grove of trees
    • Run NW past the Hunting Lodge and up into the hills and wait for the Boar event again
    A couple notes about the map: I made ‘tick marks’ (they look like little orange hyphens/dashes) that remind you of the order the champions are killed in and which Waypoint to take [-, –, —, etc]. I managed to capture and keep the ‘white dotted-line of travel’, running around following The Train, so if you are a bit lost, try to re-create the white dotted path that you see on my map. To help with finding the Forest Spider champion on a hill SE of the Hunting Lodge (and NE from the Krytan Waypoint), I put a small orange “S” where it is normally encountered. Lastly, my server/shard does not kill The Bandit Lieutenant champion [and we may be the only shard that doesn’t apparently], but if you wish to find him, he is in the Bandithaunt Caverns, N of the Vale Waypont.

    The champion Boar shows up only after someone talks to Lodgemaster Carthage at the Hunting Lodge. There is a short event waiting period, then two hunters come out and slowly stalk their prey. Everyone usually waits in the hills to the NW of the Lodge and this can be a good time to go through your inventory, unpacking any goodies, salvaging, organizing, etc. There may even be some Banners nearby that can give beneficial Boons [“Buffs”], usually placed by some friendly Guild Member. Take a short break, get a drink – and get ready to jump back on The Train!

    When you sit down and start to play a new gaming session, or if you have lost track of where to go next, you can always ask in Chat (/map) where The Train is at that moment, to know where to ‘get on’ (to join in). Most people simply type, “Train?” or ask “Where is the train now?”, and usually some kind soul will answer and state what stop The Train is at (what champion they are killing), or where they are heading to, at that moment. Common answers are, “Boar” or “Spider is up” or “waiting on Troll” or “at Oak”, for the various champions (it may differ slightly on your server, but not by much). Sometimes, a helpful person will suggest, “Head to __some champion__”, which means that the one they are currently fighting is almost dead, so you ‘might as well head to the next one’.

    Killing the Oak champion while on the Train in Queensdale
    (Click to see Full Size)

    A few things to keep in mind as you ride The Train are: you have to be able to hit the mob in order to be able to loot it at all, therefore you may have trouble if you are much lower than level 7 or so (the mobs are Level 10). Loot will drop that is around your character’s level, no matter what it is, so you can usually use it right away or soon. The Boar portion of the Route takes a little bit to get started and sometimes people will say phrases like, “Boar is Walking” or “Hunters are Walking” or “Boar Starting” and so on, to let everyone know, who were most likely just standing around waiting or AFK, that the event is beginning. You can gather Resources that are around (mine veins, gather plants/food, cut down trees) or that you pass by, on your way to the champions, just don’t fall too far behind if the group is large – they can start to kill these Champions pretty darn fast – and you might miss out on the Loot Drop entirely!

    Killing the Spider champion while on the Train in Queensdale
    (Click to see Full Size)
    That’s it! Try not to bore yourself with repeating this excessively, by the way. Have fun, enjoy the loot and camaraderie of fellow GW2 players; but if it starts to become boring, go back to your character’s story, pop in for some PvP or even do some Gathering, enjoying the landscape and beauty that is Guild Wars 2.

    [UPDATE 1*** As of April 23rd, 2014 there seems to still be a lot of confusion as to the accepted/overall Route that The Train should take. There have been many arguments over what order the train will travel in and opposing groups will perform the run in awkward manner to each other. As a result, ‘finalized’ changes to this map and article will be delayed, until the community can solidify a pattern/route for The Train.
    For now, “the basics” of what the Train is and does are secure and remain the same as this article. The Train may still run on your server/shard in the same manner, in general. Enjoy these aspects of this post, for now]
    [UPDATE 2*** As of May 3rd, 2014 although there is still a bit of debating as to what should be a ‘standard route’ for The Train to take, a general consensus seems to be forming and this map and article will be redone and/or updated Soon™]
    [UPDATE 3*** As of June 2014, although there is still some debate that occurs (mainly because someone gets to Oak ‘early’ and kills it on the group), most of the consensus appears to be this route: 
    Boar-Troll-Bandit-Oak
    I am working on a new, updated version of the map and will insert it here when finished.
    For now, the rest of the information of this post (how to follow the train, etc.) is still valid and hopefully found helpful, for those who are interested in knowing what The Train Of Queensdale is and how to do it]

    See You In The Game!

    Men’s Body Click Diet part 1

    In the summer the men had to cope with constant daylight, so they were missing the normal cues to go to bed. ‘When it’s daylight, even though it’s midnight or one o’clock in the morning, you don’t think of it as being the time to go to sleep,’ says Dave. ‘Your mind just says, hey, there’s work to be done. I may be tired but I’m not recognizing the need for sleep because it’s daylight.’

    Already lacking the strong time-giving effects of light, the men could not set their body clocks by what they were eating, either. ‘We had four meals a day. Two of them occurred at noon and midnight, the other two at six in the morning and six in the evening,’ continues Dave. ‘One of the difficulties in telling what time it was, was that the 6:00 a.m. and 6:00 p.m. meals were powdered scrambled eggs and the other two meals were stew. So if you woke up at six o’clock and went into the galley for a meal and you had powdered scrambled eggs, you didn’t know whether you were having breakfast or dinner.’

    Despite losing the signals that are normally provided by the cycle of light and dark, the timing of activity, intake of food, reasonable work shifts or even simple obedience to the clock, most of the men managed toget through without becoming acutely sick or injured. But some of them developed a condition they called Big Eye, in which they became stuck in a sleepless state. Almost everyone had duties that required exhausting physical labor, but even so, the men with Big Eye failed to sleep for days.

    Diet Start

    The men with Big Eye demonstrated that the body’s flexibility is a double-edged sword. The loss of essential time givers easily disrupted their circadian rhythms, probably setting them up for health problems if they continued down that path. On the other hand, proper application of some fairly simple rules for circadian health could have rescued them. And the same rules can rescue you from a potentially perilous state of disorganization.

    The Body Clock Prescription reinforces strong circadian rhythms; produces better sleep, enhanced moods, alertness and energy; and reduces the risk for reproductive cancers for everyone. In addition to these overall improvements in health and well-being, there are specific aspects of the diet that have a favorable impact on prostate health, a subject that provokes anxiety for many men.

    Prostate Ailments: The ‘Male Problem

    There is certainly cause for concern. Prostate ailments are an almost universal threat to men in Europe and North America. Among men in the United States, prostate cancer is the most common cancer; it is also the second leading cause of cancer death.’ In addition, countless men suffer from other prostate problems. This phenomenon represents a kind of `male problem‘ corresponding roughly to what used to be called ‘female problems’, a much less specific collection of gynecological woes that were lumped under this heading in the mid-1900s. The notion of female problems embraced excessive menstruation, infertility, irregular periods,cramps, vaginal discharge and other kinds of medical mischief that women endure.

    The male problem is more localized in the prostate gland, the part of the male reproductive system that secretes fluids that help transport sperm. Nevertheless, it is a fairly complicated picture, which includes inflammations of the prostate, a common condition known as benign prostatic hypertrophy (BPH) and prostate cancer.

    What’s more, prostate problems may lead you to needing a cystoscopy, where a narrow flashlight is inserted into the hole from which you pee until it arrives in your bladder. On the way, it passes through your prostate gland. Cystoscopy is a procedure that causes ‘big eyes’ in the bravest of men.

    Besides cystoscopy, the other method often used to examine men with prostate complaints is digital rectal examination, in which the examiner can feel the profile of your prostate gland. (Digital refers to the doctor’s finger, not his computer.) Both give much less information than you would expect to get from such relatively invasive procedures. Opening your mouth and saying Ah’ discloses much more about your teeth, gums, tongue and throat than any rectal exam reveals about your prostate, unless you have a huge lump. Ultrasound, magnetic resonance imaging (MRIs) and computerized axial tomography (CAT) scans are necessary to get a good picture of what’s happening to this gland, whose actual location on the floor of your pelvis seems mysterious to anyone who has not studied anatomy.

    Diet and Prostate Health

    If you look around you, especially as you get older and start hearing stories from men who have prostate trouble, you may wonder if there’s something simple you can do to avoid it. I’m not talking about early detection, which is mentioned frequently these days. (Of course, most men’s idea of early detection is that early next year or the year after would be just fine.) Nor am I saying that a good history, physical exam, measurements of prostate-specific antigen (PSA), a common blood test used to screen for prostate cancer and other indicators of your underlying health, prostate or otherwise, are not a good idea.

    But you’re misplacing your priorities if you go through those procedures without making some modest changes in your diet now to prevent troubles in the future. Most men who have a reasonably healthy personal and family medical history and who don’t abuse themselves with excesses of drugs, tobacco and alcohol, other risky activities or excessive inactivity can probably remain free of obvious symptoms even if they don’t implement all the points of the Body Clock Prescription. Some of these pointsare aimed at people who are trying to get out of serious medical trouble or who have risk factors that call on them to follow the diet very strictly.

    Naturally, the more closely you follow the Body Clock Prescriptionthe better, but if you do nothing else, I urge you to consume soy protein and flaxseed powder daily to prevent prostate problems. By making these simple dietary changes and keeping your mind open to the possibility that fungal infection, intestinal overgrowth or allergy might have a hand in any prostate inflammation that is not otherwise easily diagnosed by a physician, you can go a long way toward avoiding the possibility of getting prostate cancer, as well as the other problems that frequently lead men to undergo cystoscopy.

    PIONEER STUDIOS OFFICE MICROSOFT BY SKB ARCHITECTS

    The New Pioneer Studios Office which was designed by SkB Architects starting from the idea that need a space to socialize at night as well as it functioned during the day.

    Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

    Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

    Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

    Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

    Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

    The Secret Knowledge of Fourth Graders

    As I was reminded in reading all of the June Currently’s, not everyone is on summer vacation yet. So for those of you who are not yet enjoying time off, I wanted to share a fun creative writing activity that works well for the end of the year.

    One of my favorite books to share with students is The Secret Knowledge of Grown-Ups by David Wisniewski.

    In this highly-entertaining book, Wisniewski takes several “rules” that children often hear — like “eat your vegetables” — and explains the real reason that rule exists. For example, we don’t eat our vegetables because they make us healthy. The real reason we eat them is to stop them from rising up and taking over the world! Or, we don’t brush our hair to help us look neat, we do it to stop the hair from growing back into our heads and crowding out our brains. The book is filled with hilarious examples and colorful illustrations that my students loved.

    I read excerpts from this book over the course of a couple days, and several of my students looked at it in their free-time. We then set out to write our own examples for a class book entitled “The Secret Knowledge of Fourth Graders.”

    Here are some of the “rules” students wrote about:

    • Why you need to read “Just Right Books”
    • Why we use number 2 pencils on tests
    • Why you can only check out 2 books from the library at a time
    • Why we take AR tests
    • Why it’s important not to be tardy
    • Why we return library books on time
    • Why we have homework
    • Why we use pencils instead of pens
    • Why we don’t bend the pages of a book
    • Why we stack chairs at the end of the day
    • Why we take standardized tests

    The creativity in the “real” reasons why we do these things was fantastic. Here’s an example from one of my students:

    We wrote our final drafts on our iPads in Pages using the Visual Report template. That helped tremendously with the formatting.

    I’m planning to share several of these examples with my students next year, and I will definitely do this activity again. My students enjoyed it so much that several of them were talking about making other “spin-off” books such as The Secret Knowledge of Minecraft Players or The Secret Knowledge of Readers. I’m sorry that I didn’t get to see how those turned out as well.

    If you’ve never read The Secret Knowledge of Grown-Ups, I highly recommend it. It’s great for sparking creative writing ideas, and it can provide a fun writing activity in the late stages of the year.

    What are some other school rules you can envision your students writing about? I’d love to hear your ideas in the comments!

    My Trip to Male, Maldives, September 2010

    The trip to Maldives was a business development trip. Most people just come to Maldives and stay in a resort and go back. I was lucky to see the Maldives by land, sea and air; as well as spending time in Male. I recommend all to see Maldives in all its glory

    View of Water Villas.

    View of Maldives by Air (Sea Plane)

    Not only did I snorkel but I also went on the “Whale Submarine”

    As a sprawling archipelago Maldives (I traveled from Male to the northern most inhabited Island and back to Male) is a breathtaking destination. However, I was shocked to see poverty in the Maldives with a population of just over 300,000. I guess corruption and discrimination is rampant in this tiny nation as well. I must say that Maldives presents a unique problem to any government in having to deliver services to small populations spread across 200 islands (Out of 1192 Islands spread across 90,000 square kilometers)

    I believe the only solution is to embrace ICT and use it to reach every person. However, having said that; the ICT literacy among the Maldivian population is also very low. A real chicken or egg situation for the politicians of Maldives to solve. If ever there was a country which can be considered easy to develop it must be the Maldives.

    Globesity continue…

    WHY WERE PALAEOLITHIC PEOPLE SO HEALTHY?

    • They had an active lifestyle
    • Their protein intake was far higher in polyunsaturated fats, because their animals were smaller and wild
    • Their consumption of fibre was far higher than ours, at around 100g (31/2oz) per day
    • The plants and berries they were eating were providing them with around 300 times more immune- boosting and antioxidant phytonutrients (plant nutrients) and vitamin C than the average diet offers today.

    Warning signs from the present day

    Diet Start

    • 300,000 American deaths per year are due to obesity-related non- communicable diseases. This accounts for 12 per cent of the entire US healthcare expenditure, costing the country $100 billion (270 billion) per year. The cost of a cheeseburger may be coming down, but its cost to the nation’s health most certainly is not.

    In 2002 the Centre for Disease Control and Prevention (CDC) in Atlanta estimated that 17 million Americans, including 151,000 under the age of 20, now have diabetes. Type 2 (or adult-onset) diabetes is a disorder resulting from the body’s inability to make enough insulin (a hormone that regulates glucose metabolism in the body) – and it can be life-threatening. The risks of heart disease and stroke increase two- to fourfold and the death rate doubles in diabetics. The disease is also the leading cause of blindness, kidney failure and amputations.

    • In 2002 the National Audit Office in the UK revealed the following facts:

    58 per cent of adults in the UK are technically overweight, and 20 per cent are clinically obese.

    In 1998 around 30,000 people in England alone died prematurely as a direct consequence of being overweight.

    In the same year obesity was responsible for 1.8 million lost working days, costing the National Health Service and the economy of the country an estimated 22.5 billion ($3.6 billion).

    The number of people who are obese in England has tripled over the last 20 years, and if this trend continues, one in four people will be obese by the year 2010.

    • North American Inuits, whose native diet traditionally consists of whale meat, berries and moss, had no history of heart disease, diabetes or dental decay – until they introduced white flour and sugar into their diets.

    July Currently

    How did it get to be July already?!?!

    I’m still recovering from 3 days of EdTech awesomeness at the ISTE conference and linking up with Farley at Oh’ Boy 4th Grade for this month’s currently.

    Listening – My two-year-old has recently become obsessed with Sofia the First on Disney Jr. It’s a cute show, but not my favorite of the toddler choices…not that I’ve become a connoisseur of toddler TV or anything…

    Loving – I started a garden last summer, but it became somewhat overgrown when Georgia had its monsoon season last summer, and it didn’t turn out as well as I’d hoped. This year, we’re in a new house, and while I don’t have the yard space (or HOA permission) for a full garden, I have space on my deck for a container garden. I’m growing bell peppers, jalapeno peppers, herbs, tomatoes, squash, cucumbers, and carrots, and they’re really coming along! My daughter and I check on them every afternoon, so it has become a fun summer project.

    Thinking – This was my first year to attend ISTE, and I learned SO much. It was overwhelming, exhausting, and inspiring, and I just need a little time to process it all. I’ll start blogging tomorrow about some of the coolest stuff I learned.

    Wanting – I’m moving into a new classroom this year, so I had to box up all of my stuff at the end of the school year. I’m hoping (*fingers crossed*) that it all got moved to the new room (in a different building on our campus) so I can begin unpacking soon.

    Needing – I’m a little panicked that it’s July already. I have a lot of projects that are in various stages of completion, and while I know better than to think I’ll get them all done, I’d like to check a few more items off my list before I go back to school in a few weeks.

    4th Plans – I’m looking forward to a three day weekend with my husband and daughter. We don’t have any big plans, but we may take Sydney to see her first fireworks extravaganza.

    On a final note, as I prepare to move into my new classroom, I’m starting to think about decorating. The wall colors are very different in my new room, so my old stuff might not work. Here’s a quick pic of the new room from my Instagram account:

    I’d love to hear your color schemes/decorating ideas if you have any! The move-in and shopping spree will start next week!

    Have a great weekend!

    Easy or Hard to Digest

    The faster your body can digest a carbohydrate, the higher its dieting index value. There are two major types of digestible polysaccharides or complex carbohydrates: amylose and amylopectin. Both contain many glucose units, but the foods with more amylopectin raise the blood glucose levels much more readily than foods containing more amylose. The branches in amylopectin starch have many surface areas, which make it easier for digestive enzymes to break it down faster.

    Diet Start

    These easy-to-break-down starches include foods such as most breads, white potatoes, white flour, and snack foods such as pretzels, donuts, and cookies. Most of these foods are also processed or refined carbohydrates, but some natural unprocessed carbohydrates have higher amylopectin levels, including parsnips, russet potatoes, and rutabagas.

    Starches that contain more amylose include some whole grains and legumes (lentils, dried peas, and beans) and some of the starchy vegetables such as yams and sweet potatoes. These foods are best for your dieting index weight-loss program.

    Dietary Fiber

    Most dietary fiber is not digestible. In other words, you might consume the fiber, but there’s a good chance most of it will not be digested such that the nutrients enter your bloodstream. Instead, the fiber is excreted in your stool. There are two major types of fiber: soluble and insoluble. Mostly it is the insoluble fiber that does not get digested, but both types of fiber slow the rate of carbohydrate breakdown into blood glucose. Because of this, it’s great for you to eat lots of dietary fiber. Ideally, you should consume 25 grams or more every day.

    Don’t overdo the fiber. But you’d need to consume a virtually unpalatable amount of fiber supplements, such as psyllium husks, to eat too much fiber—such as 4 or 5 tablespoons a day. With too much fiber, you could actually block the absorption of important vitamins, minerals, amino acids, and more. Overeating fiber can, in essence, make you undernourished. (And undernourished doesn’t equate to being thinner.) More than 45 grams of fiber a day is generally too much for most of us.

    April Nitzsche on WBIR Knoxville

    April Nitzsche was recently on WBIR as part of their Workout Wednesday. In the segment April demonstrated some exercises you can do at home and in the gym with kettle bells for a good workout. She also mentioned the new Maryville opening location as well as the Bearden location.

    You can also view the video here.

    Quick Tip: Guild Wars 2 – How To Split Stacks Of Items

    Just a quick tip for GW2 and those of us who were tying to split stacks of things, only to link them into Chat and ‘shout’ the item’s link to people around us, the entire Map, etc. The way to actually sort things in a more private manner, is to hold down the ALT key and then drag the stack of items to an open slot. A dialog box should come up asking you how you want to split the stack of items (as seen in the example below):

    Pressing the Shift key, as most know, will link the item in the chat box, and pressing Control, will link it and shout it out in Chat automagically – which is nice and embarrassing. I’ve seen some random linkages in the Chat Box [of things that aren’t of any interest] so I know it isn’t just me! I hope that this helps someone out and saves them from this atrocious “Faux Pas”…

    See You In The Games!

    My Trip to New Delhi & Hyderabad Cont…….

    Today I finished the 2nd organizational capacity assessment of research organizations. I must say that I was impressed with this organization in terms of its outputs. I was equally impressed as to how they have been able to manage the organization with limited resources.

    On the way to the organization today I was able to take a photograph of the 3 wheeler which was kitted out as a tipper and used for garbage collection. Here it is.

    My trip to Hanoi, Vietnam

    I returned to Vietnam to facilitate a 2 day planning workshop for the 6 organizations that I did the capacity assessments in January. It felt good to meet everyone and catch up. The workshop went smoothly and I had very positive feedback from the participants.

    I was happy to see people genuinely interested and participating / contributing towards the workshop. This ensured a high quality of the results and the buy in by the participating organizations. I put the success of the workshop down to the following:

    1. The CEO / Executive director (ultimate boss) of the organization participated
    2. They had read the organization capacity assessment report and were familiar with the contents.
    3. They were guaranteed of a tangible workable plan at the end of 2 days.
    4. Being open and willing to learn

    There is a chance that I may be requested to do some more work for them in the near future; however it seems that this is the end of this phase and the client is happy with the results.


    The view from the roof top restaurant near Hoan Kiem Lake.

    I stayed at the Trang An hotel; It’s in the center of Hanoi, near Hoan Kiem Lake, so quite convinient for walking around, shopping, finding nice restaurant, etc… Had a good time too.

    WORKOUT ANYTIME in Journal & Topics Newspapers

    WORKOUT ANYTIME in Journal & Topics Newspapers in an article titled, “New 24-Hour Fitness Facility Opens In Buffalo Grove.” The article begins with information about the new club and then gives some details about the grand opening. The article ends with information on WORKOUTANYTIME’s plans for expansion in Illinois and some background on Jeff.  Click here to read more or begin below.

    New 24-Hour Fitness Facility Opens In Buffalo Grove

    A new 24-hour fitness facility recently opened in Buffalo Grove.

    Workout Anytime opened at 700 Buffalo Grove Rd. The facility is open 24 hours a day to members with staff on site from 9 a.m. to 8 p.m. weekdays; 9 a.m. to 5 p.m. Saturdays; and 10 a.m. to 2 p.m. Sundays. Members receive a special key card to unlock doors when staff is not present.

    (Read More)

    Paperless Mission #7: Annotating Rubrics with GoodReader (iPad)

    This is the seventh post in my Go Paperless! Challenge Series. If you haven’t completed the previous missions, be sure to complete those first.

    • Mission #1: Gather Your Tools
    • Mission #2: Build Evernote Notebooks
    • Mission #3: Email Notes to Evernote
    • Mission #4: Create Checklists in Evernote
    • Mission #5: Organize Your Files in Dropbox
    • Mission #6: Setting Up GoodReader (iPad)
    Also be sure to link up at the Go Paperless! Linky.

    Mission #7: Annotating Rubrics with GoodReader (iPad)

    I try to give my students high-quality feedback whenever possible, especially on their writing assignments. In the past, it would take me days to grade all of their papers and write hand-write comments on their rubrics. So when I passed those papers and rubrics back to students, it would kill me to see students stuff them into the abyss of their backpacks, or worse — toss them into the recycling bin. I wanted them to take it home and share it with their parents, and I wanted them to be able to refer back to that feedback. Eventually I learned to photocopy the rubrics before I passed them back, but that still wasn’t ideal. It created more paper clutter and one more thing for me to work on organizing.
    When I say that GoodReader has become one of my all-time favorite apps, I mean it. I now use GoodReader to fill out rubrics and other student feedback. To start, make sure that you have the rubric saved as .pdf in Dropbox. While GoodReader can read any type of document, it will only annotate a .pdf. Then open up the .pdf of the rubric in GoodReader (see previous tutorial).

    Choose the highlighter tool to highlight the appropriate categories on the rubric. The first time that you go to annotate a document, it will ask you if you want to save to this file or create an annotated copy. If it’s a document that I’m only planning to use once or student work, I typically select “Save to this file.” When I’m planning to use the document over and over again, though, I’ll create an annotated copy. That’s what I’d choose when using a rubric to grade student work.

    Once I’ve made my selection, I’ll be able to annotate all over the document. Once you’re in the highlighter tool, you can drag your finger over the text that you want to highlight. You can change the color of your highlighter, and you can also delete highlights by tapping on the highlighted area.

    At the end of the rubric, I like to type specific comments for my students. To do that, choose the typewriter tool. A little window will pop up for you to type your comments, and then it will save them to the document. If it saves it in the wrong spot, simply tap on the text and a new menu of options will appear.

    You can drag and drop the text into the correct space and re-size the text area to get it formatted the way you’d like.

     When you’re done annotating the rubric, tap the center of your screen to see the “My Documents” option.

    From there, you’ll want to rename your file. To do this, select “Manage Files,” then tap on the annotated copy of your rubric and select “rename.”

    Once you’ve renamed your document, you’ll have some options for moving it. First, I send a copy to the student’s notebook in Evernote. To do this, tap “Manage Files” again, select your newly renamed document, and select “Open In.” A new window will pop up asking how you’ll want to save the file. Select “Flatten annotations” because that will preserve your edits and merge it into the document so that you don’t lose your work.

    Once you’ve chosen that, another window will open showing which of your installed programs you can open it in. As you can see, I’ve get several options available. You could also upload it directly to Dropbox if you would like to back up your work there rather than in your student notebook. This might be a good option if you have a folder shared with the student for passing back work.

    When I’m ready to hand back the rubric to students, I open it in Edmodo and attach it as a direct message to the individual student. This allows the student and his or her parents to see it. They could also download a copy if they’re using a computer. (I’ve had mixed results with document downloads through Edmodo on the iPad.)

    This system has been incredibly helpful for me. It’s easy to manage because I don’t have to keep track of paper or make sure that I’ve made enough copies of the grading rubric before I start grading. Just one more step in the quest to curb paper clutter.

    What are some other ways you can imagine using GoodReader in the classroom? I’d love to hear your ideas in the comments section!

    Chronic Illnesses and Diet part 1

    Chronic illnesses are frequently the result of a web of interrelated factors. Your body may be reacting to a germ, an allergen or a toxin or you may be deficient in a vital nutrient. And the whole situation may be complicated by insulin resistance. It’s unrealistic to think that finding and treating just one piece of the puzzle will be sufficient to remedy the problem. Restoring balance is a more realistic approach.

    Balance and Health

    Balance is a key concept in most alternative medical approaches to health, such as traditional Chinese medicine, naturopathy, homeopathy and Ayurveda. One of the problems that mainstream medicine has with these alternative medical systems is that the practitioners appear to offer the same remedy for all sorts of illnesses. This doesn’t seem right to doctors trained to think that there are a certain number of discrete diseases that exist in nature. Physicians have also been taught that for each disease there is a distinct treatment. We know, for example, that if you have a strep throat or pneumonia a particular antibiotic is the right treatment, while another antibiotic is appropriate for your urinary tract infection because a different germ is involved. If you burn your finger or you break your arm, the treatment is again going to be designed for the specific problem that you have.

    Diet Start

    There is certainly some truth to the idea that specific illnesses or conditions need precise, individualized treatments. But there is another valid argument to be made as we move away from acute ailments to focus on the increasing prevalence of chronic illnesses. Sometimes the symptoms of a chronic illness can be suppressed with drugs, but since the cause of the disease is unknown, an individualized remedy to cure the person is out of the question. When an alternative medical practitioner recommends a generalized strategy that is not necessarily aimed at the distinct disease but is more directed at correcting imbalance, these approaches are designed to get to the underlying causes rather than the individual symptoms.

    If you are in pain, it’s hard to believe in a treatment unless it works right away. Dietary changes and other generalized strategies, like the Body Clock Prescription, usually do not produce instant relief. These measures do sometimes take effect quickly, but it’s frequently a slower process. I think you will be more motivated if you understand what lies behind much chronic illness.

    Rhythmic Disturbances May Underlie Many Chronic Illness

    As researchers continue to elucidate the mysteries of the scientific basis of disease, we realize more and more that similar fundamental mechanisms underlie much chronic illness. These include abnormalities of cell membranes and their capacity to send and receive messages, the backfiring of chemistry designed for cellular defense (autoimmunity and inflammation) and ‘sparks’ from your own metabolic fire, environmental radiation and chemical pollutants (oxidative damage). This is why a generalized strategy to treat chronic illness is beneficial.

    To this list I would add dyschronism or the failure to keep the various cadences of the body’s biochemical activities in harmony. Disharmony is the direct cause of jet lag, symptoms related to shift work and some sleep disturbances. But having your body in disharmony is also likely to bring out the worst in you more readily than if your body is well tuned. Poor tuning contributes indirectly to the expression of other illnesses, as indicated by the tendency for many ailments to have their own characteristic time peak of maximum intensity. There is evidence to support the idea that there is a rhythmic component in a number of diseases; among the most significant findings related to dyschronism are the following:

    Seasonal affective disorder is a form of depression directly linked to the shorter daylight hours of winter.

    Sudden cardiac death and nonfatal heart attacks occur most frequently between 7:00 and 11:00 a.m.

    Strokes occur more frequently between 6:00 a.m. and noon.

    Asthma sufferers experience their worst symptoms in the early morning hours.

    The growth of breast cancer cells may be inhibited by melatonin. (When a 1995 study showed that Finnish flight attendants had an increased risk of breast cancer, the principal investigator hypothesized that frequently crossing time zones was part of the problem, since jet lag interferes with the normal production of melatonin. Although his theory has not yet been proven, other studies have shown that melatonin inhibits the growth of breast cancer cells.)

    Circadian rhythms have been substantiated in the symptoms of rheumatoid arthritis (least pain and stiffness around 5 p.m.) and allergic rhinitis (peak of worst symptoms between 5:00 and 7:00 a.m.).

    Beautiful Bed Room Design Sample

    Beautiful Bed Room DesignBeautiful Bed Room Design

    Beautiful Bed Room Design MinimalistBeautiful Bed Room Design Minimalist


    Beautiful Bed Room Design ElegantBeautiful Bed Room Design Elegant


    The hottest color of 2010 is Beautiful Bed Room Design which is a strong color that must be used as a complement with lighter tones so as to not overwhelm the space and to make it look classy and fun.In the pictures above you can see a beautiful turquoise interior starting with the chandelier and ending with pillows.It’s a good combination between turquoise and floral tapet from walls.

    EXOTIC CONCEPT HOME FULL COLOR VERY JUOOOOZZZZZZ

    Have you ever seen life, both in the apartment before? Usually, when it comes to so many colors, we have to overcome the enormous risk of visual confusion room. However, in this situation, it seems that everything is in place and atmosphere that inspired this apartment is the energy and extreme informality. Especially designed for young working couples, this house is a fusion of passions and interests. As their styles are very different and they wanted some of their own furniture to integrate into their new home, things were very difficult for designers.

    EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

    EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

    EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

    EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

    EXOTIC KITCHEN CONCEPT HOME FULL COLOR

    EXOTIC KITCHEN CONCEPT HOME FULL COLOR

    EXOTIC BATHROOM CONCEPT HOME FULL COLOR

    EXOTIC BATHROOM CONCEPT HOME FULL COLOR

    EXOTIC BEDROOM CONCEPT HOME FULL COLOR

    EXOTIC BEDROOM CONCEPT HOME FULL COLOR

    Quick Tip: Can’t Record Your Game At All? (64-bit/32-bit Fix)

    Just a quick tip for when it seems like you cannot record your game ‘at all’:
    64-bit computing is still relatively new for home users, which means that not all 64-bit hardware and applications communicate without problems. Many game recording apps simply can’t record games that operate in 64-bit modes. Just look for a 32-bit version of your game/gameclient and then your game recording program (no matter which one you use, be it Dxtory, Bandicam, MSI Afterburner..) should be able to record the screen. [For games that use Java (eg. Minecraft), download the 32-bit Java at their website]

    See you in the games!

    And More: Corel’s VideoStudio – Crashing When Using ‘Open With’ To Import Clips Into VideoStudio [Fix/Workaround]

    Just last Month, I picked up version 20 of Corel’s recently-updated video editing suite “VideoStudio” (nomenclature “X10”) and am having a lot of fun learning what it can do and how to do it all (coming from mainly editing videos with Sony’s Vegas ‘Movie Studio’ line of products [now taken over by MAGIX]). However, I quickly ran into a little issue with importing clips using the “Open With” option in Windows and wanted to share what I found…

    Normally, in Windows you can ‘right-click’ a video file and mouse-over the menu option “Open With..”, which brings up a sub-menu of known applications, to ‘send’ the file to (‘opening the file with the chosen application’). Doing this, whichever application you select will startup and the file will be sent to it to work with.

    However, doing this with a video clip and VideoStudio x10 I found, every time the program would open up, it would immediately ‘crash’ (close/stop/etc). Hmm… time for some Troubleshooting! I double-checked that the file in question was not corrupted excessively by playing it, testing it in a couple of video/media players, and even tried a few other clips that were ‘known good’ (that VS worked with before). Each time, using “Open With…”, the Splash Screen for VSx10 would show up and then just as the program itself looked like it was opening, the entire thing would crash and show this message:

    Example of the “Corel VideoStudio has stopped working” Error Window Pop-Up
    when trying to import a clip into VideoStudio X10 utilizing the “Open With” shortcut in Windows

    I then went to the Corel ‘Official’ Fora [Forii?] and did some searching to see if anyone ran into this same issue. Unfortunately, all I could find were people experiencing ‘general crashes’, that is, crashing and non-starts without it being specifically associated with utilizing “Open With..”.

    I then decided to try these same ‘testing files’ on some other video editing programs I have installed, such as Sony’s Vegas Movie Studio (now owned by MAGIX, the same company that makes the Movie Edit Pro product line, which I have no experience with yet, at this time). Using the “Open With..” command, Movie Studio was able to open and import all of the video clips without issue – so then, what’s up Corel? /tilthead

    I thought of trying VideoStudio ‘on it’s own’, not importing or ‘sending’ anything to it – just opening the program and seeing if it works… Everything opened fine! I was just playing with the program the other day in fact, learning some of the features it offers [I’ll have to write a short ‘Review’ or at least a ‘First Impressions’ sometime of it]. So why was it being ‘fussy’ (to use the highly technical term)? I tried opening and closing the program a few times thinking about it, when I noticed that when I opened VideoStudio X10, I was being greeted by a nice-and-helpful “Welcome” StartUp Page…

    The “Welcome” Section of VideoStudio
    (Click to see Full Size)

    Indeed, ‘The “Welcome” Startup Page’ offers a lot of helpful information on opening VideoStudio. There are Tutorial videos on some of the New Features for that version and even Basic Tutorials and Help File links. But wait – no editing interface! No Timeline, no Media Library to add clips – that’s it! That’s the problem! I went into the Settings to see if there was a Preferences option where I could set the Section to open VideoStudio to be – not the “Welcome” section, but the “Edit” section – the tab/area where all of the editing/mixing and importing takes place. There it was: Default Startup Page – and it was set to “Welcome Book”…

    The Corel VideoStudio X10 Preferences Window
    showing the Default Startup Area/Section which is shown when the program starts
    (Click to see Full Size)

    A simple pull-down menu change to “Edit” and that was it! Now, VideoStudio is opening to the “Edit” section/area every time. So, I tested it out: right-clicking on my video clip and mousing-over “Open With..” and then clicking on “Corel VideoStudio” – it worked! VS opened up and in a few seconds more, my little video clip was right there on the Timeline, waiting patiently to be edited. Woohoo!

    Example of Corel VideoStudio x10 Starting Up In The EDIT Section
    (Click to see Full Size)

    Here is a video version of the steps above, made showing the error when trying to use “Open With..”, what happens and how to change it, as well as the final ‘working’ result of changing the option (after I finally figured out what it was):


    [VIDEO NOT YET COMPLETE, IT WILL APPEAR HERE ONCE FINALIZED AND UPLOADED TO YOUTUBE]

    Hopefully this will help any of you dear readers, who use VideoStudio and were running into this error/crash/issue when opening clips with VS (trying to use “Open With..”).. Enjoy and Have Fun editing your gameplay clips once again!

    ~Troy from The Game Tips And More Blog


    [I’m calling this a Workaround, since this is more of that than a true ‘Fix’… It does not solve the base issue of VS not being able to import a clip using “Open With” without taking taking these steps (whether this is more Microsoft’s fault or Corel’s fault is beyond the scope of this post …and being more experienced in computer hardware than computer software (programming, etc), I would not have completely isolated the very base cause of the issue anyway – or at least, could not offer a 100% explanation of what is occurring)]


    Note: I am not affiliated in any way with Corel and I have not, and I will not, be compensated for mentioning VideoStudio or any other of the products herein, in any way.  I have used other video editing products than these in the past, and will do so in the future, including free editing applications, such as VirtualDub, AviDemux, DVDVideoSoft products and more… I am merely an enthusiastic gamer-and-sometime-editor and wanted to share information that I discover about these products to help other gamers record-and-edit and have fun doing it, if I can do so.

    High-quality protein

    Our bodies are composed mainly of protein, which (after water) is the most abundant substance in the body. It is the major constituent of our muscles, tissues, skin, hormones, enzymes, antibodies and blood. Even after childhood protein plays a vital role in maintaining and rebuilding our bodies as they cope with the wear and tear of daily life.

    Proteins are broken down by the process of digestion into units called amino acids, and the body requires 22 amino acids to form human protein. All but nine can be produced in the body. These nine are known as ‘essential amino acids‘ and have to be provided in the diet. Foods that contain all nine are termed ‘complete proteins’, and they include meat, fish, dairy and soya protein. Fruit, vegetables, grains and pulses are ‘incomplete proteins’ and have to be carefully combined to provide sufficient amino acids in the diet.

    Diet Start

    Protein is fundamental to rebalancing blood-sugar levels, because it encourages production of the hormone glucagon, which helps the body to release stored glycogen for energy and encourages the burning of fat. Glucagon also helps to balance excess insulin production.

    What is Biological Value?

    In order to be efficient, protein foods have to be of a high quality and have what is termed a high Biological Value (BV) — this indicates how much of theprotein is retained by the body. Eggs used to be classed as having the highest BY, but micro-filtered whey, whey-peptide blends and lactalbumin (whey- protein concentrate) are even higher. Micro-filtered whey protein used to be a useless by-product of cheese manufacturing. Now it is processed at very lowtemperatures and turned into a protein source with a very high BV that contains all essential and non-essential amino acids.

    The only whey to go

    To maintain a healthy immune system, blood, skin and muscles, you need to consume protein with a high By. Whey protein (which is derived from milk, see Q&A opposite) is an excellent supplement that has long been used by bodybuilders and athletes alike. It has many uses in a dietary regime:

    ¨ It encourages the formation of lean muscle mass

    ¨ It increases glutathione levels, which has great antioxidant and immune- boosting properties

    ¨ It helps to build healthy new collagen

    ¨ It provides an invaluable source of protein for vegetarians who are attempting to balance their diets

    ¨ It is a quick and easy way of having a high-protein meal or snack

    ¨ It can be incorporated into recipes as a replacement for carbohydrate ingredients.

    There are a multitude of whey products on the market — some better than others. Many come in sweet flavours, which are great when making shakes and smoothies, but you need to source natural, unflavoured products if you want to incorporate whey-protein powder into savoury dishes such as soups. These are widely available through health-food stores and on the Web. Just make sure you don’t confuse them with slimmer’s meal-replacement powders, which are usually laden with carbohydrates.

    The average serving of whey protein is a 25g (1 oz) scoop, but check on the label to see how much of that scoop comprises protein: the lower the protein content, the higher the carbohydrate content. And beware of `blends’: these are likely to be bulked up with milk and soya derivatives. To get the best out of your whey products, go for the highest protein concentration possible.

    And More: Deals and Sales – 2014 Summer Super Sales

    Just to let more people know, in case some didn’t already, there are a lot of great Summer Sales going on right now at various game distribution/retailer websites [think of them as ‘Winter Wonder Sales’ if you are in the Southern Hemisphere]. Here are a couple samples:

    Good Old Games, now called GOG.com, have both ongoing sales and Time Limited Deals, with games such as The Hitman Series, Simcity2000, the Baldur’s Gate and Icewind Dale series, the Might & Magic series, the Wing Commander series, Quest For Glory and King’s Quest series, the Rollercoaster Tycoon series, and much more
    (Click to see Full Size)

    Steam is having it’s Summer Sale, that also has some ongoing deals with some Time Limited Sales, with games such as The Witcher series, Euro Truck Simulator series, the Left 4 Dead series, the Total War series of games, Red Alert 3, Civilization 5, and much more
    (Click to see Full Size)
    Some of these are Time Limited Deals, meaning that they are only ‘on’ for a few hours, or change after a few hours – so check back there once in a while and see if any games you have been waiting for are on sale – most of these are 80% or 90% off!
    [For the most part, they seem to ‘stay’ on sale/remain on sale, but at a slightly higher sale price than within the ‘time limit’ (but are still available at less than regular price)]
    I hope you find something you like and See You In The Games!

    cool little trailer with a hinged top

    https://www.instagram.com/bikergeardotstore/

    Trip to Hyderabad cont…..

    The assignments are over and I am on my way home. The drive from Chilakaluripet to Vijayawada was uneventful; so was the flight back to Hyderabad. I had arranged to be picked up and was met at the airport; the drive back from the Hyderabad airport to my guest house was not usual as the vehicle I traveled did not have air conditioning. So my senses were overloaded by the melting pot that is India; the sights, the sounds and the smells greeted me along the way to my guest house. The only disconcerting factor was the pollution levels. The smoke from the vehicles combined with the dust that they kicked up hung as an orangish grey cloud over the city. There were times that I found it difficult to breathe so had to cover my mouth and nose.

    On reaching my guest house I packed all my bags and turned in for the night as I had to get up at 3.30 AM to start my last leg of the journey. Before turning in I had spoken to the driver who was supposed to drive me to the air port in the morning. As a matter of caution I obtained his mobile number for contingencies. He faithfully promised to be there at 4.20 AM to drive me to the airport. The plan was that I had to be at the airport one hour before (Domestic flight from Hyderabad to Chennai) and it took one hour to drive to the airport.)the scheduled time of 6.20 AM

    The next morning I was ready by 4.20 and SMSed the driver; then came 4.30 still no driver. I got a bit concerned since we had not planned for any delays. So I went to the security post of the compound and hailed the security. As usual the security guard was huddled up in a corner of the security hut fast asleep. I woke him up and found that he did not speak a word of English. So using sign language and my broken Hindi/Urdu managed to convey the situation to him; finally he got on his bike (Literally) and went and woke the driver who slept in the other corner of this large compound.

    I left for the airport around 4.50 AM and made it on time for the flight. The rest of the journey went as scheduled and without incident. I am back at home; and finishing all my reporting before the next assignment.

    The carbohydrate jewels

    By upping your intake of low GI fruit and vegetables, you will not only be on your way to becoming leaner, but you will have a profound effect on your health. The amazing phytonutrients (plant nutrients) that you find in brightly coloured raw organic fruit and vegetables are clever little substances that can protect you from ill health in various ways, although many people’s diets are sadly lacking in them.

    Phytonutrients can help regulate the immune system, stabilize vitamins in body tissues and protect from serious illnesses, such as such as cancer. They do this by working as antioxidants alongside vitamins A, C, E and D, and the minerals, selenium and zinc. As a team, these powerful compounds have the ability to slow down the damaging oxidative process caused by those ‘enemies of a healthy state’, the free radicals. Antioxidants can also rid the body of these free radicals, which are the natural waste products of metabolism, which, if left unchecked, can lead to degenerative disease, by causing imbalances on a cellular level.

    Diet Start

    Take note that these free radicals are also found in overheated oils and fried foods, another good reason to kiss junk food good bye.

    They aren’t classed as essential nutrients, but without phytonutrients your sense of wellness would be severely compromised.

    They work in the body at deep physiological and biochemical levels, and luckily enough are to be found in low-density/low GI fruit and vegetables. Eating these raw wherever possible is the key to maximizing their life- enhancing qualities. Cooking destroys many of the benefits that you will reap if you include a colourful array of energy-boosting raw fruit and vegetables in your daily diet.

    Life is a balancing act

    So now you have a better understanding of the impact that the wrong carbohydrates can have on your body, and have established that you need to incorporate more of the colourful and low GI fibrous fruit and vegetables in your diet. But man cannot live by carbohydrates alone. You will have to take a close look at the two other macronutrients that work hand-in-hand with carbohydrates to provide energy and nourish the body: protein and fats.

    The key to balancing blood-sugar levels, banishing insulin resistance and losing excess weight lies in successfully balancing these three macronutrients.

    The Incredible Benefits of Grounding – Walking Barefoot on the Ground!

    Anyone with small children knows they want to try to ditch their shoes every chance they get – but if you think about how you feel when you are barefoot you will probably realize that you  also feel better when you can walk around barefoot.  Researchers have begun to unravel why being barefoot directly on the ground can in fact be very good for your health!
    Your immune system functions well when your body has an adequate supply of electrons, which are easily and naturally obtained by barefoot contact with the Earth.
    Research has shown that electrons from the ground have measurable antioxidant effects that can protect your body from inflammation. For hundreds of thousands of years on the planet humans have been in direct contact with the ground without anything that would block the flow of electrons into our bodies.
    However in modern time’s pavement, wood, rubber, plastics and many other forms of non-conductive material are between our feet and ground blocking the natural flow of electrons.
    The surface of our planet has a negative electrical potential. So when we are in direct contact with it electrons flow to your bod through a process called “grounding”.   Grounding causes positive physiological effects that promote optimum health.
    Specific researched benefits include improvements in blood viscosity, heart rate variability, inflammation, cortisol dynamics, sleep, autonomic nervous system (ANS) balance, and reduced effects of stress.
    When you connect directly to the ground without any non-conducting material between you and the electron field of the planet there is an improvement in the balance of two sides of your autonomic nervous system:  the sympathetic and parasympathetic nervous systems.
    How Shoes May be Impacting Your Health
    Materials like metals are excellent conductors of electricity (aka electrons!). The human body is also conductive because it contains a large number of charged ions (called electrolytes) dissolved in water.
    Other non-conductive materials, such as plastic and rubber, have very few free or mobile electrons. Traditionally shoes were made of leather, which is a good electrical conductor. However almost all modern shoes contain rubber and plastic which block the flow of electrons from the earth to your body.
    The Health Benefits of Grounding
    Your immune system body has evolved a method of destroying bacteria and viruses by generating reactive oxygen species (ROS) that are delivered by immune cells. However, these ROS can also cause extensive damage to healthy tissues. ROS are usually positively charged molecules that need to be neutralized immediately to prevent damage to the body after destroying bacteria or viruses.   This is one of the key functions of anti-oxidants which are most important in immune cells to protect them from the ROS they generate!
    Anti-oxidants essentially provide a supply of negative charges. Food based antioxidants (such as Vitamins C and E) and anti-oxidants your body produces are critical but a regular supply of electrons grounding can supply them as well.
    Evolution facilitated the process of grounding by providing conductive systems within your body that deliver electrons from your feet to all parts of your body. This system has been integral to human physiology for thousands of years. Negative electrons are always available, thanks to the Earth, to prevent the inflammatory process from damaging healthy tissues.
    All of this was interrupted when we started to wear shoes with rubber and plastic soles, and no longer slept in direct contact with the ground. Several experiments have proven that a person who is grounded is less stressed and more relaxed.
    So have some fun, kick your shoes off and get back to nature!
    How to get the benefits of Grounding
    Grounding is simple in warmer climates – simply spend time barefoot in direct contact with the earth.   Even better do this on a beach walking along the edge of the water because the flow of negatively charged electrons will be highest here because sea water is an ideal conductor of electrons!    Any amount of time will help but the more you can do it the better!  Even better spend some time laying on the beach or ground with your body in direct contact with the ground without any artificial fabrics, rubber or plastic between your skin and the ground.
    For those of us who do not live in warm climates staying grounded during colder months is a bit more challenging but doable! There are actually grounding mats available that plug in to the grounding wire port of a normal 3-prong outlet or a grounding rod (US and Canada only). The earth’s natural electrons flow right up through the ground wire and onto the mat, even if you’re in a high rise. Most mats come with an outlet tester you plug in to the outlet so if your outlet is configured properly.

    ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

    After a look at the pictures in this charming crib Scandinavia, we can only guess at the last, this apartment has no space. You’ll probably be surprised to know that in reality, the total area of ​​the house has a room of 44 square meters. Located Vasastan, Stockholm, this bright and comfortable studio seems to have everything: a beautiful modern design, function and a general atmosphere of welcome.

    ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

    ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

    According Alvhem Makleri & Interior, it is an opportunity that exudes peace and tranquility. The living room is a bright and social, with the opening of both kitchen and bedroom. Windows dissolves the border between the inside and provides natural light to govern. We are sure that you have already noticed alcove large enough for a king-size bed. This can be a bit flat, but the design approach used to improve inspires only the “oversized” ideas.

    ALL-IN-ONE-ROOM APARTMENT DESIGN

    ALL-IN-ONE-ROOM APARTMENT DESIGN

    ALL-IN-ONE-ROOM APARTMENT DESIGN

    ALL-IN-ONE-ROOM APARTMENT DESIGN

    ALL-IN-ONE-ROOM APARTMENT DESIGN CONCEPT

    ALL-IN-ONE-ROOM APARTMENT DESIGN CONCEPT

    ALL-IN-ONE-BATHROOM APARTMENT DESIGN

    ALL-IN-ONE-BATHROOM APARTMENT DESIGN

    ALL-IN-ONE-ROOM APARTMENT SCHEME

    Marathon Training Tips

    As the saying goes “those who fail to plan – plan to fail.”   This is true in business and it is also true in preparing for rigorous athletic events like running a marathon.     Successful completion of a marathon is all about creating a plan based upon the goal of completing a marathon on a specific date in a specific location.
    Determining Starting Point

    The length of your plan will depend on your current fitness level relative to running.  So the first step is determining your current fitness level which can be done in several different ways:
    If you are currently running you can get an idea of your current fitness level based on how often you run, how far you run, and your average pace when running.
    If you are not currently running, then do a 12 minute run test – see here for a how to guide to perform this simple test:  https://www.brianmac.co.uk/gentest.htm
    Once you know your starting point you can determine how long it will take you to prepare adequately to complete a marathon. The key is slow and steady progression of average distance per run and total weekly training miles – go too fast and you WILL get hurt!    The body needs time to adapt to the stresses of running.    A good rule of thumb is to increase your weekly mileage (and mileage per run) by no more than 10% per week.
    So if you are currently running 15 miles per week you would only increase total mileage to 16.5 miles per week and if your long run was 5 miles you would increase it by half a mile.
    In order to successfully complete a marathon, you need to be running somewhere between 30 and 50 miles per week with individual runs of 16 – 23 miles.  The advantage of gradually building up to a 20 – 23-mile run is that you have mental experience with running over 20 which can be very challenging the first time you do it.   That being said, placing too much emphasis on distance can result in over-training if not done carefully.
    Training Mix

    Assuming you have a base of running 15 or more miles per week on a consistent basis you should begin to mix up your training by including shorter, harder runs with longer slow runs and at least one interval training session per week.      
    It is critical that you have a training base of steady mileage prior to increasing training intensity and beginning interval training where you will perform higher intensity intervals of quarter mile to half mile mixed with recovery periods.   
    There is an entire science behind interval training and the best athletes train with a heart rate monitor all the time to precisely determine the intensity of their work intervals and how long they recover during rest intervals of slow running/jogging or walking.     This is one of the many reasons that, in an ideal world, you work with a running coach/trainer who has experience designing and working with runners to prepare for marathons and other runs.   A good coach will help plan and adjust your training based on how you progress from week to week which is essential for the best results!

    Strength and Mobility Training

    Running requires a lot more than just cardiovascular and muscular endurance – it requires specific strength and mobility to avoid injury and allow for optimum running technique.  Integrating a run specific strength and mobility program into your training can be a game changer and the program should include:
                A specific dynamic warm-up and foam rolling for areas of tightness and pain
    Dynamic Warm-up:  http://www.active.com/running/articles/before-you-run-the-dynamic-warm-up
    Foam Rolling:  http://www.runnersworld.com/foam-roller/how-to-use-a-foam-roller
    Cool-down with run specific stretches – http://www.runnersworld.com/injury-prevention-recovery/5-post-race-standing-stretches-every-runner-should-do/slide/1
    Strength Training Exercises for Running
    It is essential to have great core and glute strength to properly stabilize the body during the impact of running to prevent injury.
    It is also critical to strengthen all the muscles of the lower body including the hamstrings, calves, and intrinsic muscles of the feet.
    Sample Strength Training Program for Runners:  http://www.runnersworld.com/strength-training/10-essential-strength-exercises-for-runners/slide/2
    Putting it all together

    If preparing for a marathon seems like a lot of work and complicated that is because IT IS!    Like running successful business assessing your starting point and setting a realistic goal with a specific plan of action is key.     Also having a coach is HIGHLY recommended to not only help you create a realistic plan and schedule but to monitor your progress and adjust your workouts and plan accordingly.  

    Workout Anytime on WBIR-Knoxville Afternoon Show

    WORKOUT ANYTIME on WBIR-Knoxville Afternoon Show. Every Thursday WBIR has a healthy living segment that is sponsored by the Governor and April Nitzsche was the guest for this week on their show. April spoke about how viewers can be healthy throughout the day when they have a few minutes to spare to stay in shape in 2014. April talked about how to live healthy, and offer tips to viewers.  You also can view the video here.

    Men’s Body Click Diet part 3

    What happened with my patient Brooks shows how this scenario plays out. It also reveals why I think that such mysterious and sometimes chronic inflammations of the prostate are usually not infections but instead have a lot to do with factors that are also related to abnormal growth or cancers of the prostate.

    Brooks is a 50-year-old businessman whose previously dependable penis had become much less reliable with regard to its sexual responsibilities. At the same time he suffered from discomfort with urination, some hesitancy in starting his urinary stream and the need to get up at night to urinate more than once, which had been his previous custom. He was alarmed that whatever was going on represented some sort of permanent equipment failure. Told at first by both a general practitioner and a urologist that his prostate was ‘pretty normal’ and later that it was a ‘little enlarged’, he had undergone two courses of antibiotic treatment for nonspecific prostatitis. His symptoms improved while he was on the antibiotics but returned when he finished the medication.

    I had a telephone consultation with him and after hearing him out and considering various possibilities, I suggested to him that he had ‘some kind of mischief’ with his prostate. This was a much softer diagnosis than that of nonspecific prostatitis. But it suggested a treatment that was aimed more at making his prostate happy than at trying to kill some unseen, unidentified and perhaps nonexistent germs.

    Diet Start

    The concept of trying to make some organ in your body happy seem, alien to a regular guy like Brooks. He shares with most people the medical notion that there is a specific treatment for every condition and that this treatment is not a strategy to make some part of your body happy. It did, however, make Brooks happy when I suggested that part of his therapy was at least daily efforts to encourage the emptying of his prostate and its tubing by provoking an ejaculation. This was contrary to the no-sex advice he had been given earlier, which seemed to me like the equivalent of telling someone with a bad cold not to blow his nose.

    I offered Brooks a package of additional measures to make his prostate happy. These included daily doses of soy protein, flaxseed powder, flaxseed oil, zinc and an antifungal medicine. If you understand why I loaded my shotgun with such a diversity of remedies and how they all fit together, you will also see how I perceive that the whole range of prostate mischief from inflammation to cancer fits together.

    I’ve already explained the soy protein and flaxseed powder. I also recommended an additional supplement of flaxseed oil. The prostate gland is one of the richest sources of the hormonelike substances that are made from omega-3 fatty acids, with which flaxseed oil is loaded. They are called prostaglandins, named for the very organ under discussion, because they were first isolated from fluids found in the prostate. (Soon after their discovery in prostatic fluids, they were found to be present in a wide variety of animal tissues of all kinds and not at all exclusive to the prostate, but the name stuck.) The use of fatty acids in flaxseed oil helps the prostate make prostaglandins. But the more important motive for a prescription of flaxseed oil was the strong likelihood that Brooks, like most people, was deficient in omega-3 oils. The flaxseed oil, then, was generally beneficial rather than a treatment aimed specifically at the prostate.

    I recommended that Brooks take zinc because it helps the immune system fight off infections and control the body’s inflammatory response to infection. Finally, I prescribed the antifungal medicine because of my consistent experience with other patients where I’d seen that an overgrowth of fungus germs, particularly yeasts, has a proclivity to bother people’s reproductive systems. I have often found stubborn cases of prostate problems in men to be responsive to antifungal drugs.

    But there’s another, more important angle to the antifungal treatment Igave Brooks and the many other men I’ve treated in a similar way. In order for the isoflavones and lignans in soy protein and flaxseed powder to be transformed into the substances that beneficially modulate hormone chemistry, they must pass through the digestive tract, where they are changed by certain germs that live there. If the normal distribution of healthy flora has been disturbed so that there are too many bad germs and not enough good germs, the capacity of the intestinal flora to help hormone chemistry will be seriously impaired. Antibiotics are by far the most significant disrupter of intestinal germ populations. A single course of an antibiotic prescription can affect this balance for months or longer. My prescription of an antifungal medicine for Brooks was aimed at two overlapping targets. One was the possibility that a fungal infection was directly related to the prostate inflammation; the other was that his two courses of antibiotics had made him worse by causing a disturbance in his bowel germ population that would correct itself once the number of yeast germs living there was reduced.

    Within ten days Brooks and his prostate were both happy. His equipment returned to reliable functioning and he has remained well since. He is as pleased as he is surprised. This is true for many men whose similar responses to simple changes in diet don’t jibe with their expectation that I would have to treat them by calling out the big guns rather than coaxing their bodies back into balance. I’m confident that the remedies I suggested for Brooks worked because they were specifically connected to achieving a hormonal balance governed by a combination of factors related to his digestive flora and an intake of substances that made his prostate happy.

    It’s not a big step from consideration of acute problems, such as what Brooks had, to the more chronic problems of prostate enlargement andprostate cancer.

    Cut your Protein why no Sugar?

    The case against sugar is a complex one. Besides the fact that refined sugar is a totally unnatural substance that has been stripped of its nutritional value—fiber, vitamins, and minerals—apart from the calories it provides, sugar in concentrated form is very hard on the pancreas. The pancreas, which is responsible for the production of insulin and therefore the regulation of blood sugar and energy levels in the body, has adapted through evolution to deal with a steady flow of glucose in small quantities such as those that result from the intake of complex carbohydrates.

    One of the biggest beauty cons of all is the idea that if you eat lots of protein your muscles, skin, hair, and nails will grow strong and you will stay young. Like the old-fashioned high protein diet for building up athletic strength, it doesn’t work. The human need for protein has been grossly exaggerated. At the turn of the century, respected opinion held that we need between 120 and 169 grams of protein per day. Then Chittenden showed in human experiments that far better performance and health were possible on fifty grams, a much lower amount. Another scientist named Hindhede set the figure at thirty grams. Then Oomen in Amsterdam and Hipsley in Canberra discovered a population in Australia which develop not only full health, but exceptional muscular structure and performance on a diet of merely 15 to 20 grams of protein per day.

    Diet Start

    Later in the United States, the American Research Council’s Food and Nutrition Board agreed on a daily requirement of 70 grams for adults. One member of the board, named Sherman, described how this figure was arrived at. The evidence the committee examined indicated that a much lower amount was needed, somewhere around 35 grams, but there was agreement that if so low a figure had been set there would have been a public outcry, so a corresponding “margin of safety” was decided on and the 70-gram figure was published. But because the scientific basis for the figure was nonexistent, the word “recommendation” was chosen instead of “requirement.” Current recommendations for protein intake hover about the 50-gram mark, although there is strong evidence now that we probably need even less.

    Your body needs amino acids, the constituents of protein, for its metabolic processes, for growth and the repair and maintenance of body tissue. Proteins are made up of twenty-two different amino acids; all but eight of them your body can manufacture itself. These eight, which have to be taken in through your foods, are referred to as “essential” amino acids.

    A large portion of a protein molecule is made up of nitrogen, and one of the important things about taking protein is that it helps keep a good nitrogen balance in the body, so there is as much nitrogen coming into the body as there is leaving it. This balance helps maintain body health and muscle strength, so that you don’t go into what is known as a negative nitrogen balance, when you lose muscle tissue from your body. To keep your nitrogen right, 10 to 15 percent of your total calorie intake should be from protein.

    But when a greater percentage than this of your calorie intake comes from protein foods, then your body goes into a negative mineral balance and you start gradually losing precious minerals and trace elements such as zinc, calcium, magnesium, iron, potassium, and chromium from your system. These nutrients, so easily lost from the body, are vital not only to physical health but also to emotional stability and well-being (more about minerals later). Wachmann and Bernstein of the Department of Nutrition at Harvard University investigated the high protein diet and came to the conclusion that the protein-rich (especially the meat-heavy) diet plays a strong role in the genesis of osteoporosis, a softening of the bones, particularly in women after menopause, caused by the loss of minerals. This is probably because of the high protein diet’s tendency to leach valuable minerals (in this case calcium) from the system. And purely from the point of view of physical beauty, many of these lost minerals, such as sulfur, selenium, zinc. magnesium, and calcium, can make the difference between prematurely aging skin caused by a rapid collagen and elastin breakdown, nails that split, or hair in poor condition, and radiant looks glowing with strength and health.

    Finally, the breakdown and metabolism of proteins in the body lead to the formation of a number of complex by-products such as urea, nitrogen, and ammonia, which can be toxic. These wastes need to be eliminated. This isn’t always easy, and it puts great strain on the liver and kidneys. This is why, on the well-known high protein reducing diets, you are advised to drink large amounts of water in order to water down these poisons and help excrete them.

    Kaempferia Galanga Plant Benefits For Health

    KAEMPFERIA GALANGA PLANT BENEFITS FOR HEALTH

    Kaempferia GalangaPlant Benefits For Health – Coughing often makes your activities disrupted, but it also would make other people around us will also feel comfortable around us. There are several types of cough, which most often is a dry cough and cough with phlegm. Coughing up phlegm is sometimes more torturous than dry cough, throat full of mucus because who wants removed.
    Now this many drug manufacturers are already providing various types of cough medicines, ranging from syrup to tablet. Besides the chemical drugs, you can also wear traditional homemade cough medicine with natural ingredients that are easily found on the kitchen, which is Kaempferia Galanga and salt.
    Kaempferia Galanga Plant Benefits For Health - 1
    Prescription cough simple and traditional ingredients that have long proven to thin the mucus, making breathing until you feel more relieved and able to relieve cough with phlegm. At the moment we are taking this medicine traditional productive cough, a sense of warmth will make the body as well as the respiratory tract would be more relieved.
    ·      Powder, How to make it quite easy. Take Kaempferia Galanga, wash clean, and peeled and grated Kaempferia Galanga and squeeze and take the water, add a little water, put a little salt and stir well, Drink the potion after breakfast and before bedtime.
    Kaempferia Galanga Plant Benefits For Health - 2
    ·      Ginger can also warm the body and treat cough with phlegm. You are experiencing a productive cough is highly recommended to drink warm ginger juice in at least once a day. How to make even very easily by slicing ginger and Kaempferia Galanga, then boiled and taken water juice. Water juice that will be taken.
    ·      Orange juice, have been many people who have felt that Lime is already mixed with soy sauce efficacious to treat cough with phlegm. If you do not like soy sauce, can mix with Honey Lime. Drink Lemon juice with soy sauce and honey as much as 2 to 3 times a day
    Easy is not it? good luck and hopefully this traditional herb cough you get well soon. Hopefully article about Kaempferia Galanga Plant Benefits For Health we share this day can be beneficial to readers. Thank You.

    Georgia Bloggers Meet-up

    I was thrilled to get the opportunity to meet up with some other Georgia bloggers yesterday thanks to the organizational efforts of Jayne at Smart Kids. You see, even though I’ve been MIA from the blogging world a lot this year, blogging is always on my mind. Really.

    This year has been a whirlwind as I’ve juggled teaching full-time, parenting, and starting my PhD program. Virtually everything I’ve written this year has included a bibliography, and that hasn’t left a lot of energy for my blog. But when I’ve been researching and writing for my academic pursuits, I’ve been learning all about theories of professional learning and how our online encounters fit into that. I must say, there hasn’t been a lot written about teacher professional learning through blogging, and that’s a gap I intend to fill. More people need to know about the amazing teachers supporting each other through social media. They need to know how that process is 10 times better than any other form of professional development and how it empowers teachers to become better at their craft by pursuing their passions and interests.

    So when I say that blogging is always on my mind, I really mean it. It’s been at the heart of every paper I’ve written as I work on my PhD. When I got the chance to go meet some fellow bloggers, I couldn’t say no.

    The meet up was at Georgia School Supply in Macon, GA–about an hour and a half away from where I live. I was excited to go and meet some fellow bloggy friends because it’s always so good to be able to match names and faces and to remember that there are some real live people with amazing ideas that are working in classrooms, too. I’d never met any of the people there, so it was a real treat.

    We talked about our secret lives as bloggers and TpT’ers, shared tips and strategies, made business plans, swapped products, and had an all around great time. I love meeting other bloggers and learning how much we have in common. Everyone I met yesterday was wonderful, and I look forward to keeping in touch with these new friends!

    I hope to be blogging more this week as my student teacher takes over EVERYTHING from now through spring break (woot! woot!). In the meantime, be sure to check out the blogs from the amazing people I met yesterday!

    Jayne, Kelly, Angie, Stacy, Tara, Valerie

    PhotobucketThe Teacher Wife

    Funky Fresh Firsties

    ...And They All Fall Down...

    Georgia Grown Kiddo's

    Jennifer, Carol, Kathy, Meghan, Kim, Irma, Megan


     
     

    Michelin, Jessica, Greg, Erin, Alison

     

    5 Reasons to Flip Your Math Class

    Of all the subjects, math is probably my favorite to teach. But it is definitely not easy. By the time students are in fourth grade, there’s often a wide range of abilities. Last year, I had students who could barely add and subtract and others who were working well beyond grade level. Trying to design lessons that worked for them was a real challenge. If I moved too quickly through the lesson, several students would get lost. If I moved too slowly, others would get bored and start causing different problems.

    Then I attended the Georgia Educational Technology Conference and heard some sessions about flipped teaching, and a lightbulb went off.

    If you’re not already familiar with flipped teaching, the idea is that we need to “flip” the traditional way we teach — lesson at school, practice problems at home as homework. Instead, students should watch a short video lesson as homework to prepare for class, and then the majority of class time is spent working on practice and application while I’m there to guide them.

    I did this pretty consistently for the second half of the year, and I couldn’t be happier with the results. There were so many advantages.

    1. Students became more confident.

    For some kids, math can be intimidating. Everyone works at different speeds. What may be an obvious concept for one kid may take multiple explanations for another. There’s lots of vocabulary and room for mistakes, and when you feel like other kids are getting it faster than you, your confidence suffers.

    All of this went away when I flipped.

    Students were watching the videos at home on their own. No one knew whether they needed to replay something a couple of times until they got it. No one knew that they had to pause the video for 5 minutes to try a problem that others would have solved in 30 seconds. They could all work at their own pace, and they came to class more confident and prepared for practice the following day. The attitude shift in my students this year was reason enough for me to continue flipping.

    2. Parents were less stressed.

    There have been so many times when I’ve heard parents complain about math or express their discomfort in helping their child because they weren’t taught math the way we teach it now. And I get that. I remember thinking in my math methods courses that I could have been great at math if someone had explained it to me better as a child rather than having me memorize algorithms.

    Having the flipped model created allies from a lot of math-hating parents. Some would watch the videos along with their children and have those lightbulb moments where concepts and strategies would suddenly make sense. Others expressed a sense of relief that they didn’t have to worry about “undoing” the things we were doing in the classroom by just jumping to the standard algorithms. We were all more comfortable with the math.

    3. I had more time to see what students could actually do.

    While I always tried to keep my in-class mini-lessons short, there were days when they would drag on because some kids just weren’t getting it. By the time I felt confident they could try some problems on their own, we hardly had any time left. And by the time they got home to do it as homework, they’d forgotten what we’d spent the morning talking about, so they were back to square one.

    Now that I’ve flipped, I only need 5-10 minutes maximum at the beginning of my math block to do anything whole group. I spend that time answering questions, clarifying any misconceptions, and checking the 1-2 practice problems that I typically include at the end of the video. The rest of my math block was then spent working with small groups, conferring with kids, and getting into richer practice and problem solving than I could ever fit in before.

    I also didn’t have to worry about students getting the right answers only when their parents “helped” them. When it came time for assessments, I had a much better sense of where my students were at and what to expect from them because I was more deeply involved in their learning.

    4. I didn’t have to worry when we had a sub. 

    In the past, I would write off sub days as lost instructional time when it came to math. Now that I’ve flipped, that is no longer the case. I include a link to the video I’ve created in my sub plans, and I have the sub watch the video with the class again to start the lesson. Usually that gives the sub enough background knowledge to help with the learning task, and my students have enough scaffolding from my instruction that they can work through the practice. It made those lost days so much more productive.

    This year, I will be on maternity leave for 12 weeks, so I’m nervous about what will happen with my kids while I’m gone. But I’m less nervous about the math because I already have videos made for most of those lessons from last year. My students will have continuity in math instruction because of it.

    5. Students were more successful and could tackle bigger challenges.

    Last year was my best year ever as far as student performance on end-of-year assessments and benchmarks. I think a big part of that can be attributed to the move toward a flipped model for math. My students had more time and confidence to master the fourth grade standards, and as a result, I was easily able to push them into bigger challenges. When I surveyed the students mid-year about the flipped model, their responses were overwhelmingly positive in support of it, and I knew it was something I need to continue in the years ahead.

    Next Steps

    This will be the first year that I use the flipped model for the whole year, so I will need to prepare more video lessons and give some thought to how I’ll transition my students (and their parents) toward this model. In the weeks ahead, I plan to share more about the tools I use to create flipped lessons and some troubleshooting tips for problems that might come up.

    Now that I have some experience flipping, I’m going to go back and reread Flip Your Classroom: Reach Every Student in Every Class Every Day by Jonathan Bergmann and Aaron Sams. Jon was one of the speakers I saw at GaETC, and he’s one of the founders of the flipped classroom movement. I read the book quickly as I started to flip, but I think there are more ideas to be pulled from it.

    I’m also starting to think about other areas where I could flip instruction. One possibility might be some of the grammar, vocabulary, and word study components of my ELA block. I consistently struggle to fit everything in to that time, and flipping might be the answer. I’ve downloaded the book Flipping Your English Class to Reach All Learners: Strategies and Lesson Plans by Troy Cockrum, and I’m hoping that will give me some more inspiration.

    Have you tried flipping any parts of your instruction? I’d love to hear more about your ideas and experiences in the comments!

    INSPIRING DESIGN DETAILS LOOKOUT HOUSE

    Inspiring Design Details

    Inspiring Design Details

    The project is located atop a hill in Fairfield County, Connecticut, and has stunning views of distant Long Island. Depending on the shape of the original designers of the pyramid house, centered on the height of an open plan double lounge around an indoor pool, has been simplified and facilitated through a range of modern materials (including bamboo, stone blue tiles and glass) and a new lighting program. A glass bridge “architecture synapse“, which clearly distinguishes old from new connects the main house for the master suite.

    As the original structure, the new suite contains a large volume a little, in this case, a cube on foot, finished Claro walnut that divides the rest areas and bathrooms. billiard room “in the first photo is the most spectacular part of the house, offering an ideal place for socializing and relaxation. And as you can below, a resident has another pot, this time integrated nature

    Inspiring Design Details Rest Room

    Inspiring Design Details Rest Room

    Inspiring Design Details Dining Room

    Inspiring Design Details Dining Room

    Inspiring Design Details Kitchen

    Inspiring Design Details Kitchen

    Inspiring Design Details Bedroom

    Inspiring Design Details Bedroom

    In One Sentence™ – Heroes Of The Storm – Hero Overviews [Very Short Reviews Of Each, Currently Text-Only]

    [In light of the recent ‘Heroes Of The Storm 2.0’ release – even though this was a ‘work in progress’ since I started playing ‘Heroes’ again a bit ago and it is not fully compiled yet – I wanted to get this hopefully-slightly-helpful information up right away for everyone… So here it is – being added to as I complete it but without any Screenshots yet – I am collecting some together and plan to place them in-line within …Soon™]


    Update: Last Added – Arthas on 2017.05.04



    In One Sentence™


    A Heroes Of The Storm

    Hero Thingy Overview  


    By: The Game Tips And More Blog


    Presented in Alphabetical Order, in a Document-sorta-but-not-really format



    [Initially, was invited to the Heroes Of The Storm Beta; but was not able to play much at the time and so I didn’t write about it much back then. I did work on a few articles, such as this one, adding to it the bit that I did play. Only recently (before I knew about “Heroes Of The Storm 2.0”) I got back into this fun game, tallying up my own opinions and favourites, of each and every hero in the game. Seeing “Version 2.0” come along, I felt that, even though I have not fully compiled every singly hero yet, I wanted to share what I did have done, so that everyone – and especially newcomers to the game – could get a quick idea of each Hero and how they played in the game, helping them make a choice as to which one to try. I will be returning to this post and adding more Heroes as I play them… I hope you enjoy these little snippets of info for each one – and See You In The Game!]




    Rating Key (if applicable to Hero, when used):

    * = Heroes I ‘Liked’ (fit my personal playstyle(s), or is unique in some way)

    ** = Heroes that are A Personal Favourite (I myself would play often or ‘mainly’ would use (may not match your individual preferences dear reader, this is just a Personal Rating of mine))






    Auriel = Finding myself playing more offensively than defensively with this Hero, I enjoyed her AOE and healing capabilities.
    Alarak = With skills focusing on mainly attacking Heroes, in the right hands this high-damage-potential Assassin could be quite deadly.

    Artanis * = Another Hero with skills focused on killing other Heroes, Artanis comes with high damage output potential – and although I was left feeling oddly ‘limited’ playing him, Artanis was fun to play overall.

    Arthas = A mobile tank – big, tough, but a little slow [in my opinion] – with some light healing (and the possibility to heal yourself) and some nice offensive moves as well, Arthas can become quite competent in The Nexus.

    Azmodan ** = This large and lumbering behemoth is capable of dealing out huge damage as a “Ranged Specialist” – just be careful as you have fun creating your own armies on the way to dish it out on the enemies’ base, as you are also a ‘heavy target’, so to speak. A Personal Favourite.

    Dehaka * = With deceptively simple gameplay [or is that ‘deceptively difficult’?], high damage output potential – and with the ability to ‘tunnel to any bushes on the map’ instead of a mount [with a cooldown], this Hero has some nice unique gameplay to fiddle around with in The Nexus.

    Diablo = Huge and tough – as he should be – with some care taken and strategy used, this “Melee Warrior” will be a force to be reckoned with.

    E.T.C. * = With strong yet simpler gameplay, ETC and his unique ‘rocker’ attitude is a fun handful of Tauren to Melee with.

    Gazlowe ** = With the ability to plop down temporary turrets and shoot what eventually becomes HUGE DETH LAZORZ – not to mention being able to recover Scrap Parts for mana – Gazlowe The Goblin Engineer, though more complicated than many Heroes, was a joy to play and kill with. A Personal Favourite.

    Jaina * = With straightforward damage and easy gameplay, Jaina The Mage is fun to use and fun to take out other Heroes with …if mages only had Unlimited Mana [in any game]…

    Johanna = Johanna The Paladin is a little more difficult than most melee Heroes – she is far more offensive than defensive as I first thought she might be – with many life-saving capabilities, in the right hands she could be quite a formidable Hero to run with.

    Leoric * = With the unique ability to ‘remain undead’ and re-spawn wherever you desire after a time, along with simple melee gameplay, this Hero was neat to play – in the right hands perhaps this one could do a lot of damage in The Nexus.

    Lunara = With mainly indirect damage (DOT or Damage Over Time), this Hero was difficult to gauge; with the ability to always move faster than most Heroes (not needing a Mount) and her ranged attacks, perhaps in the right hands she could be quite effective.

    Malfurion** = A multi-faceted Support Hero with both healing and offensive capabilities, if you like to play Support in other games (such as an Engineer, or Medic/Cleric), this ambidextrous Hero should be fun for you to play in The Nexus. A Personal Favourite.

    Probius * = If I had to sum up Probius I would say words like ‘difficulter’ (because I say that’s a real word now) …and ‘cool’ …and ‘overpowered’ …and ‘work’ …and ‘cute’ …and ‘fun’ …and…other words like that with ellipsis between them.

    Raynor = With simpler gameplay and the ability to buff any allies around you – along with the possibility of some light self-healing – Rayor the “Ranged Assassin” is a helpful addition to play in The Nexus.

    Rexxar ** = If you’ve ever wanted to handle two Heroes at once, now you can with this ‘hunter-pet’ combination which promises good damage output and a lot of fun – if at a slight cost of easier gameplay. A Personal Favourite.

    Samuro ** = If you like to be stealthy, confusing opponents and striking from the shadows, this is a fun Hero to do all that and more with. A Personal Favourite.

    Sgt. Hammer ** = This spunky Ranged Hero in a Siege Tank has huge long-range capability – if she can be handled with caring hands. A Personal Favourite.

    Sylvanas * = Capable of not only high damage but also ‘converting’ mercenary units to your side, this “Ranged Specialist” also has sleek gameplay and a powerful (translation: annoying to other people) Mind Control ability.

    Thrall ** = Fast melee and a bit of spellcasting – along with being easier to play – makes this Hero a fun brute to run with. A Personal Favourite.

    Tychus = With good offensive capability, this Hero is easy to learn and practice with.

    Valla ** = With fast and smooth gameplay that is fun and easy to get used to – especially if you have played The Demon Hunter in Diablo III as many of the Demon Hunter ‘basic moves’ come into play in The Arena. A Personal Favourite.

    Zul’jin ** = Focusing on Ranged damage and even doing more damage as his health lowers, this Assassin felt like it could take out both Heroes and swaths of mercenaries with ease, thanks to his light self-healing – just don’t get caught surrounded while trying to do the highest damage possible! A Personal Favourite.





    Repeat  of top comment: [In light of the recent ‘Heroes Of The Storm 2.0’ release – even though this was a ‘work in progress’ since I started playing ‘Heroes’ again a bit ago and it is not fully compiled yet – I wanted to get this hopefully-slightly-helpful information up right away for everyone… So here it is – being added to as I complete it but without any Screenshots yet – I am collecting some together and plan to place them in-line within …Soon™]

    My trip to Dhaka, Bangladesh, November & December 2010 & January 2011

    January 2011

    Back again at the Hotel De castle; it looks like I have spent more time here in the past 3 months than at home.

    The original brief was to develop a Sustainability Plan for the organization. However, most managers confuse it with Resource Mobilization / Fund Raising Plans. Typically a Sustainability Plan involves a risk analysis of the organization comprising of Board, Executive Leadership, Resource Audits (Man, Money, Material & Technology / knowledge), HR, ICT, Finance and other support services systems audits plus a host of other environmental issues.

    I cleared up this confusion and came to develop a Resource Mobilization Plan (Only Money); however, the team has not completed the budgets. So have to delay the process by a few days. Meanwhile I witnessed riots in Dhaka due to stock market crash yesterday. Stock price manipulation rings were very active in DSE over the past year and sent the stock prices way up beyond the wildest PE ratios possible for some companies. Just like what’s happening at the CSE in Sri Lanka. Most stocks trade much higher than PE ratio. Is this a prelude to what we can expect in the streets of Colombo I wonder?

    Finally managed to develop the RM Plan for the organization; this is the end of the assignment for me and look forward to going back to Colombo.

    December 2010

    It’s good to be back in Dhaka and at the Hotel De Castle. Guess what its Harthal season again! I was in Bangladesh in 2006 and in 2008 for the then famous Harthal “Save Democracy” which was a success in overthrowing the elected government and appointing a caretaker government. However, during Harthal the general public and the visitors to Bangladesh suffers by having severe restrictions in free movement. I will spend 2 weeks in Dhaka for this assignment with the intention of developing the Vision, Mission, Values and Strategies of the organization.

    It was hard work but managed to develop the Vision, Mission, Values and Strategies for the organization. During this process there was a one day Harthal, but it seems to have been a flop! What’s going on here, have the people finally realized not to go on Hartal for silly things? Well, we will just have to wait and see.

    As part of the assignment I had to help the management team present the Vision, Mission, Values and Strategies to the board and get their comments and final approval. However there is an issue. The issue is that; the roles and responsibilities of governance and the executive branches of the organization are not clearly delineated to ensure efficient operations. In short there is a power struggle between the two. I have to manage this delicate process; otherwise all hell may break loose during the meeting and true to form, the consultant will be the fall guy.

    You can read my article titled “Governance – Do we need to build capacity?” published in http://capacitydevelopment.ning.com/

    The meeting with the board went off without any major hiccups and got the necessary approvals and consent for the next stage of the assignment.

    November 2010

    The assignment I undertook was to develop a new Vision, Mission, Values, Strategies and a corresponding Resource Mobilization plan and support services (Finance HR & IT) plans for Acid Survivors Foundation ASF http://www.acidsurvivors.org/ of Bangladesh. I will be staying at the Hotel De castle in Banani, Dhaka.

    I must say that I was quite shocked at the number of people being attacked in Bangladesh and the physical and psychological damage it does to people. The major cause of attacks was economic (Dowry & Land). Given the poverty levels in Bangladesh I must say that I am not surprised. Having enough resources to go around for 160 + Million people is not a joke.

    The irony is that at the United Nations (Put UN Web Site) review of the Millennium Development Goals (Put MDG review results Web Site) it was concluded that mot poor countries (including Bangladesh) were failing miserably in trying to reach the MGD’s. In my Humble opinion this is because most poor countries are not dealing with the white elephant in the room i.e. population growth. This is obviously considered a sensitive subject given the reluctance of politicians to take on the religious establishments head on be it Islam or the many denominations of Christianity. On the contrary this should be the main subject of discussion by far thinking politicians the world over.

    For instance if Bangladesh were to implement strict policies to have ZERO growth in population for the next 10 years it would develop at a faster rate As even the slightest growth in the nations wealth will be held by a content population. This is common sense.

    Most people misunderstand when we talk about zero population growth. They think that you are suggesting that people stop having children. In fact it does not mean that at all. It just means that your birth rate has to be equated to your death rate.

    In the case of developing countries; the way that externally funded development sector project are implemented creates further frustrations within a given population and at times directly create political and social unrest. Most development sector professional (from the north countries as well as the south countries) don’t even understand this themselves. Consider the following. Most western donors advocate rights based projects. This means that all citizens will demand equal levels of services from the state irrespective of economic, social, political, ethnic or religious status. This in a developing country means that “now” 10,000 people line up for services as opposed to 1,000 people. The issue is that the rights based development project itself does not have any or enough funding to cater for the newly generated demand. The funds are only available to create and sustain the demand by the citizenry. So now the poor government has to serve a larger number of people with the same or slightly increased budget. This only means that in order to cater for the quantity the quality of services will be compromised. This is OK with the rich citizens as they can afford to pay for services by the private sector or bribe the state employees or use influence to get a better service from the state service provider.

    One can argue and say that this is a deliberate attempt by some of the donors to create instability within developing countries. I am not a conspiracy theorist but I wouldn’t put it past some of them. The point is that we who hail from the developing countries must act a lot smarter than we currently do if we want to develop.

    As for me the assignment will run in to the New Year and I will have to go to Bangladesh a few more times to finish the assignment.

    Carbohydrates, good or bad for dieting

    Another distinction that some nutritional counselors make is between refined and unrefined carbohydrates. In dieting index weight loss, we prefer to classify carbohydrates as low-, medium-, or high-dieting. However, because you’re bound to hear carbohydrates defined as refined and unrefined, this section discusses how the terminology relates to the dieting index.

    Refined carbohydrates are more highly processed than unrefined carbohydrates. Processing includes such activities as cooking, milling, and separating the whole food into parts. Examples of refined carbohydrates are white bread, white rice, most packaged breakfast cereals, donuts, cakes, cookies, bagels, fruit and vegetable juices, fruit drinks, soda, and candy. The list goes on. Refined carbs are usually high-dieting, but some can be low, as in vegetable juice and some fruit juices.

    Diet Start

    Unrefined carbohydrates are those kept in their natural state. In general, the unrefined carbohydrates tend to contain more fiber. Examples of unrefined carbohydrates are whole vegetables and fruit, whole grains, dried peas and beans, and nuts and seeds. Some foods are processed more than others. For example, fruit juice is not processed as much as fruit drinks. Usually unrefined carbs are low-dieting, but not always, so be sure to check the dieting index listings before you eat them.

    Pastas

    Even though regular pasta is a highly refined, processed carbohydrate, its dieting value can be low, medium, or high, depending on how you cook it. If you cook spaghetti for only 5 to 6 minutes, its low-dieting. Other types of pasta may need slightly more or less cooking time. If you open a can of prepared spaghetti in sauce, those noodles will have a higher dieting index because they’re mushy.

    Cook pasta just until it softens and you’ll be eating a healthier meal. The longer pasta is cooked the more available the starch in the pasta is for quick digestion—exactly what you don’t want.

    The Good and the Bad

    Carbohydrates aren’t good or bad; the difference is in how you eat them and how much of them you eat. This is one of the reasons why dieting index weight loss works so well. You don’t need to give up your favorite treat food, whether it’s white bread, bagels, or candy bars. But you do need to eat them in such a way that you don’t cause a quick rise in your blood sugar levels, and you do need to watch portion sizes.

    The dieting index gives you a way of managing your blood sugar and insulin levels, thus assuring that you aren’t storing fat and also that you continue to lose weight.

    One way to do this is to manage your dieting load by meal and by day. You’ll be balancing the low-dieting foods with some high and some medium, and overall, you can keep your insulin levels low.

    Now’s the time to give up the notion of bad and good carbs and of fattening and nonfattening carbs. Instead, accept all carbs as okay, based on how you eat them.

    Men’s Body Click Diet part 4

    Benign Prostatic Hypertrophy and Prostate Cancer

    Benign prostatic hypertrophy is an enlargement of the prostate that’s called benign because it is not due to cancer cells. Still, the enlargement can be far from benign if it results in a lack of control over functions that we all take for granted, including urinating when you want to urinate and only then. A single urinary accident in front of your classmates in the first grade can constitute a major, unforgettable scar in one’s childhood; a repeat performance, like that of my sixty-year-old patient while standing in line at the check-in counter at O’Hare Airport, is no joke either. Nor is `benign’ the right word to describe the condition that underlies such loss of control. BPH may also involve getting up frequently at night to urinate, with the intense urgency to do so unfortunately combined with a disconcerting hesitancy of performance and a lack of reward in the volume of urine produced.

    Although the symptoms of BPH can be severe, it is ironic that men with prostate cancer often have no symptoms. As they age, most men, on biopsy, show signs of prostate cancer. In fact, by the time they are in their eighties, nearly all men have prostate cancer, as defined by the typical cancerous appearance of cells under the microscope. Yet, because this particular cancer grows slowly and spreads infrequently, only a small percentage of men actually become sick or die from the disease. (A man’s lifetime risk of dying from prostate cancer is a little less than three per cent.)`’

    Diet Start

    Given the low odds of illness or death from prostate cancer, it’s confusing from a medical standpoint when a 60-, 70- or 80-year-old man has a prostate biopsy and is found to have cancer cells. Because the question of the actual malignancy of the condition — how likely it is that the cancer will grow quickly enough to cause problems — is difficult to resolve, it encourages a more aggressive approach to therapy than might otherwise be warranted. Since aggressive therapy frequently involves either removing testicles or taking female hormones, which can produce dramatic changes in a man’s body, this is not a trivial question.

    Natural therapies for treating or, more important, preventing illness are not usually studied in the same way as pharmaceuticals, because no one can patent a naturally occurring substance like flaxseed powder and make enough money to justify the enormous expense of carefully conducted, controlled and double-blinded studies. Still, the studies show that consuming soy protein and other isoflavone and lignan-containing foods reduces the risk of prostate cancer. And the cancer data suggest strongly — and there is abundant anecdotal evidence to support it — that the same hormonal environment that leads to the high incidence of cancer in older men inour culture, but not in Chinese and Finnish men, is also associated with the risk for prostatic enlargement.5

    The simple strategy for preventing the range and frequency of prostate problems is to consume more soy protein, flaxseed powder and rye fiber. If you happen to be a regular bacon, ham or sausage and eggs kind of guy, I urge you to substitute the shake, with its soy protein and flaxseed powder, at least four days a week. It’s good that you’re eating protein at your morning meal and getting the lift you need at the beginning of the day, but what you’re eating will not protect your health like soy protein and flaxseed. (If you don’t have time for breakfast, see the section for travelers in the appendix, where you’ll find a quick shortcut that will help you get your soy protein and flaxseed every day.

    The Body Clock Diet and Heart Disease: It’s not Just the Cholesterol

    Coronary heart disease (CHD) is the number one killer of both men and women in the United States. Each year, more than five hundred thousand Americans die of heart attacks caused by CHD. Soy intake has been shown to lower cholesterol and decrease cardiovascular disease associated with high cholesterol. There is growing scientific evidence to support this; for example, one recent study showed that a diet high in soy protein reduced cholesterol by as much as 20 per cent. 6 Other research has demonstrated that soy protein lowers triglycerides and reduces the oxidation of LDL or ‘bad’ cholesterol, which contributes to blood vessel problems linked to cardiovascular disease? And flaxseed has also been shown to lower both total and LDL cholestero1. The Body Clock Diet, which includes daily intake of soy protein and flaxseed powder, ensures that you get this important protection.

    But cholesterol is not the exclusive evil agent in heart disease. Some people, especially those with complicating conditions of diabetes, tobacco smoking and a strong family history of heart disease and obesity, carry cholesterol-related risks. But most people who have heart attacks and other complications of ‘hardening of the arteries’ have fairly normal cholesterol levels.

    The tide of medical thinking is changing when it comes to heart disease. It looks as if issues related to carbohydrate excess, insulin resistance and homocysteine and its control by folic acid will take center stage away from cholesterol. 9 The benefits of substances like flaxseed and soy are not due solely to lowering cholesterol. Soy and flaxseed do indeed lower serum cholesterol, but they also modify carbohydrate and fat metabolism, further decreasing your cardiovascular risk. You don’t have to be takingaim at your cholesterol to get benefits from soy, flaxseed and the Body Clock Diet.

    Like many men, you may have a tendency not to think about your health, shrugging off warnings from your mother, spouse, doctor and children as well as newspapers and television programs that try to scare or educate you about activities that are dangerous to your well-being. Nor do you want to listen to me when I say that failure to adhere to basic circadian principles may eventually show up as something noticeably wrong with your health. But my advice is simple: there are some painless things you can do to reap what are potentially major rewards for your long-term health.

    Multi-Protocol Label Switching (MPLS)

    Today the division between routers and switches is a fine line. Whereas switches were initially designed to help segment a LAN into multiple collision domains, and thereby allow you to extend the reach of a particular LAN topology, switches have moved higher up the networking ladder. When switching is used in a LAN to connect individual client and server computers, the process is known as microsegmentation, because the collision domain has been reduced to just the switch and the computer attached to a port. Switches at this level generally work using the hardware (MAC) addresses of the attached computers.

    Layer 3 switching moves switching up the ladder by one rung by switching network frames based on the OSI Network layer address—an IP address, for example. But wait, that’s what a router does, isn’t it? Of course. A layer 3 switch is basically a router, but it implements most of its functions in application-specific integrated chips (ASICS) and performs its packet processing much faster than does a traditional router, which uses a microprocessor (much like a computer CPU) for this function.

    Internet 2010

    When you get to the top of the ladder, where large volumes of data need to be routed through a large corporate network—or the Internet, for that matter—even the fastest traditional routers or layer 3 switches easily can become bogged down by the volume of traffic. Because of this, the core of a large network traditionally has been built using ATM or Frame Relay switches, and IP traffic is sent over these switched networks.

    To speed up the processing of routing packets at high-volume rates, a newer technology has been developing over the past few years and goes by the name of Multi-Protocol Label Switching (MPLS). MPLS is covered in the next section.

    Combining Routing and Switching

    Traditional routers have a large amount of overhead processing they must perform to get a packet to its destination. Each router along the packet’s path must open up and examine the layer 3 header information before it can decide on which port to output the packet to send it to its next hop on its journey. If a packet passes through more than just a few routers, that’s a lot of processing time. Remember that IP is a connectionless protocol. Decisions must be made about a packet’s travel plans at each stage of its journey through the network. The solution to this problem lies in newer technology—high-speed switching. Specifically, Multi-Protocol Label Switching, which is discussed in the next section, combines the best of routing techniques with switching techniques.

    When you look at concepts such as ATM or Frame Relay, which are connection-oriented protocols, this isn’t the case. Instead, virtual circuits (either permanent or switched) are set up to connect to endpoints of a communication path so that all cells (as in the case of ATM) or frames (as in the case of Frame Relay) usually take the same path through the switched network.

    “Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Happens Again Today! [Updated 2018-03-02 with Answer Image]

    It’s the 15th of the month – and it is time for something that I re-re-started up, just last Month – The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

    “Can You Guess Where The Screenshot Below Is From?”

    (A Game Screenshot Identification Contest)

    Having its’ Fifth Edition now, today – February 15th, 2018!

    All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
    below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

    1. Your guess for the game the image is from.
    2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
    That’s it!
    **[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


    The first correct answer submitted by a Skillful Identifier/Gamer will receive this month’s contest prize – which is: a gifted game from the Steam online store!

    [Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
    due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
    of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
    Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

    Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

    Can You Guess Where The Screenshot Below Is From – Contest #1
    Can You Guess Where The Screenshot Below Is From – Contest #2
    Can You Guess Where The Screenshot Below Is From – Contest #3
    Can You Guess Where The Screenshot Below Is From – Contest #4

    Are you ready? Here then, is the Screenshot image for this month, below:

    [As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    After a week has gone by, if there is no correct guess as to what game the Screenshot is from, I will return here and put up a ‘Hint’ image – a larger portion of the Screenshot – to assist in Game Recognition-ing-ism…

    Update!

    A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the already-slightly-larger-than-normal CONTEST Screenshot for this month’s Contest)! Ready?

    Here is the HINT image (with enlarged portion revealed), below:

    [Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is still a portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

    Update!
    It has been two weeks since the Contest began and there have been no correct submissions! Aww….

    To end The Mystery, here is the answer for February’s edition of
    ‘Can You Guess Where The Screenshot Below Is From’ (2018-02):


    The Answer for this month’s Contest was: Just Cause 2!
    [Captured in 2014, this Screenshot I took was back when I was playing games at 1600×900 – which is a ‘sweet spot’ I personally recommend [by my own testing] for Mid-Range GPUs (VideoCards). This was JC2 being played with a GTS 250, the ‘Black Knight Edition’ from ASUS which I paired at the time with an AMD X2 245, iirc**. Wow, I have been planning this identification game a long time – never getting around to it for a while of course – haha]
    Click to see Full Size
    Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Sixth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

    See You In The Games!

    [**Note: I am not affiliated in any way or degree with NVIDIA or AMD, and I have not and will not receive any compensation of any kind, for mentioning them here. I am merely an enthusiastic user of both companies’ products. I have utilized both and will continue to use both in the future ((on a personal note, I find I usually am ‘stairstepping’ with their GPUs, purchasing from one manufacturer, then the next ‘upgrade’ purchasing from the other, heh. I always Suggest to people who ask; to get whichever has Features you like – and only what you can afford at the time – it will be outdated in 3 years or so anyway; Enjoy what you have and be thankful because there are always people who have less!))]

    (The Game Tips And More Blog Contest Game #2018-02)

    It’s Not Just You™ – HumbleBundle ‘Vegas Pro, Discover Creative Freedom’ Installer/Registration Not Working [Notification]

    For the next two weeks (13 Days, according to the Countdown at the HumbleBundle Website, starting today) there is a fantastic offer for Video Editors, Music Composers, Web Developers and more – over $900 worth of Software, including Sony’s Vegas Pro [the Vegas Editing Product Line was bought out by MAGIX, a German software company that has produced it’s own editing software for years, popular for their “Music Maker” and “Movie Edit Pro” lines]. So what’s the issue? Well, this Bundle is so darn popular, many parts of it aren’t working/responding, at this time. For example, if you run into the Installer ‘starting but just closing/crashing’ or the store or program ‘not registering’ or the ‘website is down’… just letting you know… It’s Not Just You™

    Part of the reason why this Bundle is so popular (although many HumbleBundles are quite popular at different times), is because one of the main pieces of Software offered is Vegas Pro Edit, originally by Sony. This video editing software is a Premium Version (“high end”) of this program, normally being sold at around $400. Along with other great products, such as Magix Music Maker, Xara’s Photo and Graphic Designer, Xara’s Web Designer, Photo Story Deluxe and more – it’s easy to see why this Bundle is so popular, for all kinds of content creators and producers. Indeed, if you are into (or trying to get into) making music, editing video, or web design, at all; I highly recommend picking up this fantastic bundle of software, if you can. The link/URL to the HumbleBundle directly, is here:

    https://www.humblebundle.com/software/vegas-pro-creative-freedom




    For those unfamiliar with HumbleBundle, it is a retail site that offers a mix of software, books and games, connected to and donating a portion to, a customer’s chosen Charity. For example, my account is connected to Extra Life, the ‘Gaming Marathon’ Fund Raising charity that I try to play for every November, on behalf of Children’s Miracle Network Hospitals. Because I attached this Charity to my Account, any purchases I make will contribute a portion to my charity. One of the greatest things about HumbleBundle however, is that the products – although one is not able to choose which products to buy specifically – are usually offered in ‘portions’ or ‘packs’ for any amount that you can afford to pay (as low as $1 up to whatever you can pay for the software company/charity/etc); and the more you can pay/donate, the more software/books/games/etc you will get. Since 2010, these ‘Pay What You Want’ Bundles (for Windows, Mac and Linux) have become quite popular over time.

    The issue that has arisen this time then, is that the Bundle is so popular, that the server for the Installer has become Unresponsive (“not working”). Even the Website for the Retail/Vendor/Developer itself has become Unresponsive, giving this Error Message [to me] seen below (from Chrome):

    As also sometimes happens with the most popular HumbleBundles, some people are experiencing very slow Downloading of their purchased products (as in 256kBps or less). Others are experiencing the Installer for the products stops functioning. This is what I personally am experiencing too (the Installer seems to startup, but then ‘crashes’ (or at least disappears) and is unable to continue. After one random attempt, I got a message stating that the Installer actually tried to Download the Installation Files but could not properly communicate with their servers. The message that came up [for me] can be seen below:

    Trying another time later on, I did see the Installer for the ‘MAGIX Music Maker 80’s Version’ pop up and start Downloading, which was nice to see; however the overall download speed was pretty slow [understandably] at about 300kBps.

    If I may make a Suggestion then – if you are running into any of the issues above, at this time: my suggestion would be, to definitely pick up the Bundle if you can [Note: You have to purchase the Bundle for at least $20 to get Vegas Pro] – then wait a while before you attempt to install anything. According to the MAGIX website, you can access your purchase (to install it) anytime after buying it, from now until September 2018 [Note: A free Magix account must be created if you do not already have one]. So, there is no rush, once you purchase it, to get the Installation Files from MAGIX. I also recommend backing up your Installation Files, once Downloaded, onto a USB drive, External Drive or even Optical Disc – anything that can back up your purchase for future re-installation, if needed (at least, until you buy a newer version of any applications you like..).

    By the way, a quick note about Vegas Pro ‘Edit Version’ (about a 450MB download) – for those wondering about the difference between the Vegas Movie Studio versions and the Vegas Pro versions (and what the ‘Edit’ identifier means), here is a short summary of the differences:

    • the Movie Studio versions of the editor are an easier-to-use, scaled-down version of the Vegas editor, with still many features, allowing up to 200 Tracks of Events (clips/media) – increased from 20 Tracks recently! It just lacks many of the advanced features of the Pro versions (such as the  ‘NewBlueFX Titler’ [professional version], Bézier Tool Masking (“any shape”), et.al). The Movie Studio version comparisons can be found here:

      http://www.vegascreativesoftware.com/us/vegas-movie-studio/product-comparison/#productMenu

    • the Vegas Pro ‘Edit version’ of the editor costs less than the other Pro(fessional) versions, as it is missing the DVD/Blu-Ray authoring package, as well as some advanced filters and creation utilities (such as the Boris FX media generators, et.al) – it is still a ‘full featured’ Professional-level Video Editing program however, allowing Unlimited Tracks, full 4K Support, Bézier Tool Masking (“any shape”), includes the ‘NewBlueFX Titler’ [professional version] and much, much more. The Pro version comparisons can be found here:

      http://www.vegascreativesoftware.com/us/vegas-pro/product-comparison/#productMenu


    [Note that the links above will show the most recent versions of the programs, but the comparisons themselves (the effects and capabilities of each) will remain similar, despite the edition versions changing over time]

    Here is a capture of the Vegas Pro ‘Edit version’ comparison, for the 14th edition [CAD prices, sorry]:

    Although the Vegas line of editing products have always had a bit of a learning curve due to their more advanced capabilities (Sony used to give out a DVD with some introductory courses for it; I am privileged to say I have one of these), MAGIX has created a few tutorials of their own, which can be found at the MAGIX Vegas Pro Tutorials website, here:

    http://www.vegascreativesoftware.com/us/vegas-pro/online-tutorials/

    So, try not to let it bother you ‘too much’, if you have run into any of these issues (downloading, installing, registering, etc). Just wait a little while longer and try doing it again, in the near future. For now, don’t worry – It’s Not Just You™…

    Good Luck with it – and Have Fun!
    [Note: I am not affiliated with Sony, MAGIX or HumbleBundle in any way, and I will not receive any compensation for mentioning them here – I am merely an enthusiastic user of their products and wanted to share what I felt was helpful information/notification. I have used other video editing programs in the past (such as PowerDirector, Nero Vision and Windows Movie Maker and some free video editors, such as Avidemux, DVD Soft’s FreeVideoEditor and VirtualDub) and will still use them when desired in the future]

    Addendum:

    During the time it took for me to compile this posting, I was able to try again and began Downloading then eventually Installing Vegas Pro [Edit version] – and it is going smoothly still – however, Downloading of the various applications in the Bundle are still quite slow. 
    If you do not mind that, dear reader, go ahead and try again now; otherwise, as in my Suggestion, perhaps wait a while (as in days) before attempting to have a fast/smooth installation of these popular applications. 

    How Much Protein Do You Need Each Day?

    One of the most controversial and confusing aspects of nutrition is how much protein people should consume each day.    There are several factors to take into account to get a good answer to this question, and there are potential problems with eating too much protein.   There are also definitely problems with not eating enough protein.  It is also important to consider what type of protein is being consumed.
    Height, weight, age, sex and activity level all factor into your protein needs.   Obviously the larger you are the more protein you need to take in to support structural proteins throughout the tissues of the body including the muscles, bone, skin and organs.  In the same way the more active you are the more protein you need to consume.  In addition, protein is used to create enzymes, and enzymes are critically important for all cellular function.
    Protein is made up of amino acids and there are essential and non-essential amino acids.    Essential amino acids MUST be consumed because they cannot be made by the body.    Complete proteins contain all the amino acids and come from meats, poultry, fish, eggs and dairy.   While vegetarian proteins are not complete it is not hard to combine different plant protein sources to obtain all the protein the body needs to function.
    Other factors which influence how much protein is required is overall caloric/energy status.     If you are eating enough calories to maintain bodyweight or gain bodyweight you require less protein as a percentage of overall calorie intake while those people in caloric deficit require a higher percentage of their overall calorie intake to maintain lean tissue mass (losing lean mass like muscle is usually NOT a good idea so this is important).
    How much is too much?

    In large amounts and for certain populations (such as those with compromised Kidney Function) excess protein can cause problems.    That being said, for the normal healthy individual, the body can easily and safely process and use a lot of protein.    A portion of the protein you eat is frequently converted to glucose (blood sugar) and if your overall calorie intake is too high you will convert excess protein into fat like ALL unused excess calories.
    Another potential problem with too much protein is that high protein intake stimulates the release of mTOR which stands for Mammalian Target of Rapamycin.    mTOR is a key regulatory protein that signals for cell growth through the creation of new proteins. Consider protein building similar to a race car. The larger the engine, the greater potential for speed. Similarly, the more mTOR present in any given cell, the greater potential for more protein construction. And just like the gas pedal fuels the engine, mTOR is a signaling protein, and can be various levels of active (like a pedal’s ability to regulate speed). If a number of different processes all signal for ‘Go’, then the cell builds as much protein as it can, as quickly as it can. So just as a souped-up car takes off rapidly, a muscle cell can signal for tremendous muscle growth very quickly, given the right conditions.   n
    For this reason, mTOR is a good thing when you are looking for muscle-building!  However, there is a potential dark-side to mTOR.   Cancerous tumors are designed to grow as fast as possible, and they rely on mTOR signaling to build proteins just like healthy cells.   So too much mTOR could theoretically put people at a higher risk of developing rapid and serious cancers.  In fact, a lot of cancer research is based around slowing down and minimizing mTOR activity in tumor cells (the exact opposite goal of muscle research).
     
    This doesn’t necessarily mean that eating more protein for muscle building is going to cause cancer. Numerous other proteins and factors come into play, and some may respond differently in muscle cells than in cancerous cells.
    Safe and Adequate Protein Intake

    The Institute of Medicine’s protein RDAs are calculated using 0.8 grams of protein per kilogram of body weight. This means an adult who weighs 68 kilograms needs at least 54 grams of protein each day. The RDA for pregnant and nursing women is 71 grams of protein per day.  Keep in mind the RDA is a MINIMUM and does not mean this is ideal!   This also assumes you are sedentary!   So, if you are exercising and trying to build muscle or older and trying to prevent muscle loss higher protein intake is better.  To determine your minimum daily intake, divide your body weight by 2.2 to determine your weight in Kilograms and then multiply by .8 to get your minimum daily protein intake.  
    The Academy of Nutrition and Dietetics states that although athletes only need about 1 gram of protein per kilogram of bodyweight to maintain muscle mass, they require 1.4 to 1.8 grams of protein per kilogram to build muscle mass; this is equivalent to about 0.64 to 0.82 grams of protein per pound of body weight each day.

    Quick Tip: Planetside 2 – Medic Revive Not Working [Note]

    Just a quick tip for those who have recently jumped back into playing some frantic Planetside 2 and thought there was something wrong with the medic tool, being unable to revive, thinking they can’t revive, etc – there was a patch a bit back that changed the Medic Tool so that Left-Click will Heal and Right-Click will Revive. Although changing such a long running/’staple’ operation is a little lip-pursing, it should have the overall positive effect of assisting with attempting to revive within a tight group of teammates (instead of your tool randomly healing someone close, it should more effectively target the face down teammate on the ground). Just a note.

    See You In The Games!

    WORKOUT ANYTIME on Entrepreneur

    WORKOUT ANYTIME on Entrepreneur

    WORKOUT ANYTIME Franchisee Chris Gately was recently featured in an article on Entrepreneur. The article titled, “Franchise Players: This Man Signed His Franchise Agreement While Serving in Baghdad” was in celebration of Memorial Day, Entrepreneur was profiling Veterans in Franchising. In this Q&A, Chris gives his insight to running a WORKOUT ANYTIME franchise.

    You can view the full article here. 

    MINIMALIST RA HOUSE DESIGN BY BAQUERATTA

    The Minimalist RA House was designed a Tokyo company called Baqueratta.They have a good past in minimalist small residences.The entire house was furnished with modern and minimalist furniture.I love this house and I hope to have someone in future, but I especially like the bathroom.

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    My Travel Tips

    I started traveling as a consultant form April of 2002. I have now completed ten years of travel. For my assignments I travel both economy and business class and use a variety of airlines. To commemorate my ten years of traveling I have compiled some travel tips. They are aimed at reducing the stress of modern travel to enable you to have a pleasant journey with the minimal amount of discomfort and hassle.



    These are my top travel tips based on my travel experience since 2002 and the post 9/11 world. (E6K9HKXKPPNE)


    Clothes and shoes


    1. Do not wear a belt – this will help you to pass through security without having to go through the hassle of taking it off and putting it on. It also helps in blood circulation.


    2. Do not wear any items of clothing which contain metal buttons, clips, labels etc.


    3. Do not wear clothing with a lot of pockets – you can forget a coin or a key and will set off the metal detectors


    4. Do not wear tight clothes this will cut your blood circulation and make the journey uncomfortable.


    5. Don’t wear baggy clothes; wear comfortable cloths that are close to your body – lets face it you will be profiled no matter what they say; so wearing baggy clothes sets off alarm bells with the security personnel. They are more likely to pad down a person wearing baggy clothes as opposed to someone wearing well fitting clothes.


    6. Try to wear slippers or sandals, if you feel clod wear a pair of socks with the slippers or sandals. If you need to wear shoes wear thin sole shoes (without any metal fittings) with no shoelaces. This will either negate the need to take off your shoes or make it easy to take off and put on shoes


    7. Try to dress in the thinnest possible layers of clothes instead of wearing / carrying bulky heave jackets / coats so that you can remove or add depending on your level of comfort. Thin clothes weigh less take less space in your hand luggage / carry on luggage.


    Money and Travel Documents


    1. Do not carry any coins. If you must carry coins in a small transparent plastic bag and put the coins in a pocket of your carry on luggage.


    2. Always carry more than one currency: example if you travel via to London to USA carry British Sterling Pounds as well as Dollars.


    3. Try to pre pay for as many expenses as possible before departure. This helps to minimize the amount of money you need to carry, as well as be able to bargain to the maximum and not be made to decide on the spot about your travel options. Use the internet and always cross check and read reviews of restaurants, taxi service and other services you are likely to pay for in cash so that you don’t get taken for a ride.


    4. Carry globally accepted credit cards as a payment option and for emergencies.


    5. Always take travel insurance; you never know when you might fall sick or get injured.


    6. Always carry your passport, visa, travel insurance, hotel reservations, travel vouchers, invitation letters, letters of sponsorship etc in one safety pouch / folder. This way you don’t have to look for them in multiple places. Keep them safe and close to you.


    7. Never ever give the bag containing these documents to anyone (except your family or personal assistant / colleague).


    8. If you are using a VIP service to breeze through emigration and customs make sure that you have line of sight of the person at all times. Confidence tricksters pretending to be service providers will walk off with your belongings.


    Baggage


    1. First check the weather of your destination (12 hours before departure – weather forecasting gets better when nearer to the dates concerned.)


    2. Finalize your clothes 12 hours before you travel, based on above.


    3. Choose clothes that can be mixed and worn: Take white shirts / blouses which can be worn with any pants / skirts and jackets. Take a few different ties / scarf and accessories so that you look different but use the least number of clothes. I am a firm believer in the use of hotel laundry services. I prefer to get the items laundered at the hotel and avoid carrying your entire wardrobe with you when you travel. Make sure that you as well as the hotel has a clear understanding of the difference between dry cleaning and washing of clothing items.


    4. Try to use the minimum number of bags as possible.


    5. Golden rule is that: if you do not need an item during the journey / flight, then it goes in with the check in luggage. One of the benefits of the post 9/11 world is that the airline industries ability to track and link you baggage to you has improved tremendously. So you do not have to carry any back up clothes in your hand luggage just in case your luggage gets lost.


    6. If you do not have any check in luggage then you need to ask the question do I really need to carry the item or can I buy it at my destination and use it. Remember most consumables (Soap, Shampoo, Mouth wash etc) are similarly priced everywhere and most hotel now provide them in the room). It’s worth trying a new brand of an item to reduce the weight and hassle of taking them in 50 ML clear bottles etc.


    7. Have a good idea of your baggage allowance. Especially if you fly economy class; it may change from airline to airline. The rule of thumb is that if it is difficult for you to carry your check in baggage (Standard international size) it is probably over weight. An average person can easily handle 20Kg. Use this principle when standing in check in queues. Avoid standing in queues with people who have difficulty in handling their luggage. They will take longer to check in as they will have to pay for excess luggage or repack them.


    Loyalty Cards


    1. Try to get as many loyalty cards as you can. Before you embark on your journey have the relevant loyalty cards sorted out and keep them with your travel documents and put the rest in you carry on luggage. You never know when they may become handy.


    2. In my opinion the top benefits of loyalty cards are:


    a. Priority check in – the shorter the queue you need to stand in the less stressful it is to you.


    b. Excess baggage allowance – you never know when you might need it, especially if you travel with your wife / partner who will shop while you are attending to business.


    c. VIP services for priority emigration and customs clearance.


    d. Access to a lounge with free broadband internet connection


    I recommend you go for loyalty cards that provide at least one of these benefits and not bother with ones that just offer air miles for ticket discounts and free food.


    Hotels


    1. Where ever possible I recommend you insist on staying in an establishment with at least a 3 star classification. This should provide good enough comfort & facilities for a business traveler. However I have come across many hotels which are classified as 3 stars but are more like cattle sheds. If clients and budgets permit always stay at the highest class hotel in your destination.


    2. The main facilities you should be looking for when selecting a hotel are:


    a. Airport pick up and drop


    b. Free broadband internet access


    c. Complementary pressing of one set of clothes per day (shirt / blouse, trouser / skirt & Jacket) + shoe shine.


    d. Free copy of the local English newspaper – This is a helpful tool to get a feel of the local environment, best places to dine and entertainment information and of course to get an insight in to what’s happening around you.


    3. Always stay as close as possible to your customers / clients. This will reduce local travel time and getting stuck in local traffic, which you may not know about or will not be able to find out before arriving at your destination. Best is to stay within walking distance. By this you can avoid the need to haggle with taxi drivers every morning and evening if meter taxis are not available.


    4. I recommend you stay on B & B basis; this gives you a lot of flexibility to move around the city and meet the locals during meal times. This will also help you get a feel of the general business environment, mood of the people as well as get exposed to the local culture.


    Flights


    1. Always use major airlines where possible. The trend now is to go for budget airlines. I too subscribe to this philosophy but with a few considerations. They are:


    a. Safety – As with all one needs to be comfortable with the safety systems of the airline. Some budget airlines operate state of the art new aircraft, while others operate others which do not have a good safety record. So each of us need to make this choice for ourselves.


    b. Reliability – Other than Europe and North America budget airlines are not regulated in a way they are liable for delays and cancellations. Unless you have a very good insurance policy you may run the risk of having to incur the cost of delayed and cancelled flights, additional hotel and transfer costs. Budget airlines will cancel / delay / amalgamate passenger manifests for flights if they do not have the desired number of passengers for a flight to minimize losses.


    Major airlines will operate scheduled flights, and if for any reason they do cancel a flight they will look after the passengers better and try to route you to your destination with the minimum hassle.


    2. Try not to use domestic airlines. As much as possible try to get to and from your destination via an international flight. Changing to domestic airlines may be cheaper but you need to consider the following:


    a. How much time do you loose and is it worth. Most domestic flights operate at much lower altitudes and will fly at a lower speed. International flights will fly higher and faster and can provide you with considerable time savings.


    b. You may have to go through immigration in one airport and through customs in another airport. This may actually take a longer time.


    c. You will increase you total transit time (Time spent not flying) and for a business person time is money.


    d. You may need to move your luggage over long distances between domestic and international terminals.


    e. You may need to pay again for excess baggage


    f. Domestic airlines too will cancel / delay / amalgamate passenger manifests for flights if they do not have the desired number of passengers for a flight to minimize losses.


    g. Most domestic airlines operate very old aircraft which may have a bad safety record.


    Jet Lag


    1. Living in the destination time zone – From the time you start your journey try to do things such as taking meals and sleeping according to the destination time zone. This will give your body extra time to adjust to life in the new time zone. Most airlines try to do this using the cabin lights to mimic the time of day. Unfortunately only the modern aircraft have this feature.


    2. Drinking fluids. – You must be well hydrated 24 hour before the flight, So refrain from:


    a. Heavy exercises that make you loose water through excessive sweating


    b. Drinking too much alcohol the day before you travel.


    3. Reduce the build up of static electricity on your body and clothes. Once at your choice of accommodation at your destination find a wooden or cement / tile floor. Take off your shoes and socks and walk on the surface for a few minutes. The best solution is walking on grass however this may not be possible at your destination. However this may be an option for you on your return to your home.

    Health Concern: FAT? continue…

    How much Fat do you Need?

    Very little. Just about any food you can think of contains some fat, and when your diet is made up of at least 75 percent vegetables, fruits, and grains with a few nuts and seeds but without added oils, fats, cheese, or butter, as in the Lifestyle Diet, about 15 percent of your calories will be in the form of fat anyway. This is all you need. The body is capable of making its own fatty acids from the foods you eat with the exception of linoleic acid, and the mere three grams you need per day is more than supplied by eating a couple of tablespoons of sunflower seeds or one small dish of oatmeal. Even leafy green vegetables such as kale or spinach contain about 10 percent of their calories in fat. It is hard to be fat-deficient. Studies of people put on very low-fat diets, even when as little as .7 percent of their calories are taken in the form of fat as linoleic acid, have shown no adverse physical or psychological effects.

    Diet Start

    Even official bodies have recently begun to recognize the need to reduce dietary fats for the sake of preserving health. The U.S. Senate’s Select Committee on Nutrition and Human Needs recommended in its report “Dietary Goals for the United States” a reduction of fat intake from the present 45 to 30 percent as well as a decrease in sugar consumption to 15 percent of total calories and a corresponding increase in the consumption of complex carbohydrates—the fruits, vegetables, and grains that are the foundation of the Lifestyle Diet. For long-term health and beauty, you should make an even greater reduction so that only about 15 percent of your daily calories are taken in fat.

    This is in line with the Pritikin and other low-fat, low-protein diets which have recently caused great interest in both the medical profession and the general public. Pritikin recommends a diet of 80 percent complex carbohydrates, 10 percent protein and 10 percent fat. Although a radical departure from the traditional British, European, and American dietary habits, regimens like the Pritikin diet can not only substantially reduce cholesterol and triglyceride levels, high blood pressure, and high blood sugar, but can also lead to an automatic weight loss and leave people feeling and looking years younger. Such a low protein, low fat diet can also literally beautify a woman both physically and psychically.

    At first such a change takes a bit of getting used to, but soon it becomes second nature and the increased vitality, slimness, and good looks it brings you in a few weeks help make it an easy way to eat permanently.

    When these are broken down slowly throughout the day, they provide the pancreas with a steady flow of glucose at a rate of about two calories a minute. When you eat something sweetened with refined sugar, the glucose poured into the system (say 100 calories or more all at once) suddenly soars. So does the production of pancreatic insulin in reaction to the insult. When this insult occurs repeatedly, as it does in the usual Western diet, with its average of two pounds of sugar per person per week, the blood sugar levels become depressed, then soar, then become depressed over and over again by a pancreas made trigger happy. In many people this leads to hypoglycemia or low blood sugar, with its corresponding fatigue and mental and emotional symptoms. It can also result in diabetes and in the development of allergic reactions to foods and to petrochemicals, which have recently been linked with diverse mental disorders as well as many acute and chronic forms of illness.

    Repeated eating of sugar and products containing it can also result in deficiencies in the B-complex vitamins and an imbalance in certain important minerals. And just in case you are reassuring yourself that you, after all, only eat raw sugar, you should know that one sugar is just about as bad as another. Raw sugar does contain some of the natural vitamins, minerals, and fiber that are found in the sugar beets or sugarcane from which the sugar has been taken but raw, brown, and turbinado sugars are all still highly concentrated simple sugars which create the same metabolic problems as white sugar. As such, they are potential disease-makers. The Lifestyle Diet excludes every form of refined sugar—from chocolate to jams to packaged breakfast cereals with their hidden sweetness. It does allow a little honey for sweetening muesli (two tablespoonfuls a day) plus one tablespoonful of blackstrap molasses if you want it for its nutritional value.

    Battlefield Hardline: Beginning July 15th, A Double XP Boost is Active ! [Notification]

    Just a quick notification to notify those interested in Hardline to note that a Double XP Boost is Currently On! Note that the notification was noted on Battlelog, as of July 15th – unfortunately, I cannot tell at this time if it is a Premium-Only Boost or a Double XP Boost for ‘Everyone’, as I recently subscribed to Origin Access (to test it for one month, to see whether you ‘lose’ patches/etc that you have earned while it is ‘on’, which I will share as soon as I find out). Still, check out Battlelog and see if it is ‘on’ for you! http://battlelog.battlefield.com/bfh/ GOGOGO

    See You In The Game!


    [Update: As of July 20th, the Double XP Boost is now over… See you next time!]

    Teacher Toolbox Trio Linky Celebration!

    Since the advent of Teachers Pay Teachers, my teaching toolbox has changed quite a bit. There are so many things that I’ve made or bought for my classroom, and there are many others that are on my wishlist. To recognize that, I’m hosting a Teacher Toolbox Trio linky party.

    Here are the rules of the trio:
    1. Share a product that you’ve made that you couldn’t live without.
    2. Share a product that you’ve purchased that you love.
    3. Share something from your wish list that you’re hoping to get for next year.

    If you’re not a seller on TpT, no worries — just share two products you’ve purchased that you love!

    1. Something I’ve Made

    The Classroom Economy Megapack was my first major project for TpT, and without question, it was the one that I used all the time last year. It has everything I needed for setting up my classroom jobs, monitoring daily behaviors on a clip chart, running my classroom economy, and giving students free/very low-cost rewards. Unlike my units that were used here and there, this was on display in my classroom all 180 days, and my kids loved it. This is the one thing that I could not live without.

    2. Something I Purchased

    Erin’s “A Roller Coaster Day” sub plans were amazing! I had to go to an all day district committee meeting on a Friday in May when the kids were already getting a little crazy, but they LOVED this. The sub said it kept them engaged all day, and given that I was already at the stage of the year when all of our required curriculum had been taught, it was perfect. It will be a permanent addition to my sub folder, and she’s also made one for grades 5-6. You can follow Erin’s blog: I’m Lovin Lit. 

    3. Something on My Wish List

    I’m really planning to focus on math facts and mental math skills early in the school year, and Laura Candler’s Mastering Math Facts has been on my radar screen for a while. I’m hoping to snag a copy before I go back in July. (Yes, July!)  Laura’s blog is Corkboard Connections.

    The Linky Celebration

    This is more than just a party — it’s a celebration! I’ve been meaning to do something to celebrate hitting 100 followers for a while now, and as I near the 150 mark, it’s definitely time! If you link up through the tool below, you’ll be eligible to win a $25 gift certificate from Teachers Pay Teachers — enough to possibly clear off some items from your own wish list!

    clip art from KPM Doodles
    I’ll be using a random number generator to select the winner from those who link up. The linky celebration will end next Friday, June 14 at 11:59pm EDT and the winner will be announced on my blog on Saturday.
    Can’t wait to discover some new products and see some of your favorites! Be sure to link up below, and please include the Teacher Toolbox Trio icon and/or another link to Eberopolis in your post.

    Happy linking!
    document.write(”);

    WORKOUT ANYTIME on WYFF Greenville

    WORKOUT ANYTIME on WYFF Greenville

    Jennifer Young and Laura Stokes of WORKOUT ANYTIME Easley were recently featured on two segments on WYFF Greenville. The segments focus on easy holiday workout tips, and Jennifer and Laura do a fantastic job talking about the different services and facilities offered at WORKOUT ANYTIME
    View the segments here and here. 

    Immune Complex Food Sensitivity

    These occur when antibodies attack allergens but don’t manage to kill them. The result is an allergen (called an antigen) with an antibody stuck to it. This creates a whole new animal (an antigen-antibody complex) that the body doesn’t recognize. When this happens, the ‘new animal’ starts circulating around the body, and this circulatory immune complex, or CIC, can eventually lodge in tissue.

    CICs create many of the same reactions as classic allergies. When they circulate through or lodge in tissues, such as those of the kidneys, lungs, liver, or joints, they can cause terrible problems by starting immune and inflammatory responses. They can cause joint problems similar to arthritis, and they can cause organs to malfunction. They often interfere with the body’s filtering mechanisms, such as the lymphatic system and kidneys. Some researchers believe they contribute to many types of kidney disease, some of which are eventually fatal.

    Diet Start

    Sometimes, people with serious CIC problems experience widespread conditions — such as migraines, kidney problems, and joint pain — and never realize that all of these problems have a single cause.

    Frequently, patients come to me hoping only to lose weight, but when they resolve problems such as excessive CIC production, they also overcome other serious health conditions. One recent patient, for example, not only lost 22 pounds but also recovered from chronic joint pain, migraines, and gallbladder inflammation. This patient was happy to lose her weight, but was overjoyed to solve the other problems. Of course she had to make a serious commitment to her health and change her lifestyle. But she enjoyed the whole process, because she felt so much better every step of the way.

    This reinforced my belief in the adage, ‘If you just strive for thin, you’ll never win. Strive for health, and thin will follow.’

    Now you know about the risk factors that make you vulnerable to food reactions, and you know how food reactions work. Good for you! You now have more knowledge about this subject than many doctors do.

    Now that you have a good foundation of knowledge, you’ll be able to understand why food reactions cause bloating and swelling. Once you understand this, you need never again be a victim of false fat.

    5 Ways to Use iPads in Math

    Today I’m linking up with the Tune into Technology Linky to share some ways to integrate technology in Math. Since I teach in a 1:1 iPad fourth grade classroom, I’ll focus on how we use iPads in Math.

    1. Build a Math Notebook in Evernote



    Evernote is my all-time favorite note-taking app, and that extends to math as well. In addition to typing text notes, students can attach documents (handouts, activities, etc) that they’ve viewed on their iPads and they can also take pictures through the app or attach pictures from the camera roll. That’s helpful when they build models with manipulatives and want to archive their work.

    2. Reinforce concepts or conduct inquiry research with math movies.

    BrainPop
    Khan Academy



    Two of my favorite apps to use in math are BrainPop and Khan Academy. I often use these to introduce a lesson or to differentiate instruction. I often feel like I get stretched pretty thin during math instruction because I have such a range of skills in my classroom, but these apps help. If I’m working with a student and a second student needs help, I can direct that student to a video on Khan Academy and encourage the student to see if that will help him or her figure out the problem until I can get there. Often the additional examples help the student understand the problem better.

    3. Make math movies to assess understanding

    Show Me

    Explain Everything

    I often ask students to show their solution to a problem on an app like Show Me or Explain Everything. There they can model their thinking using pictures or drawings, and they can record their voice as they explain their work. I learn so much about their understandings through their explanations, and it helps to assess the Standards for Mathematical Practice included in the Common Core.

    4. Make a Vocabulary Notebook in Keynote

    Keynote


    I like to use Keynote for their math vocabulary because we can create slides that use the Frayer Model for vocabulary instruction. In addition to typing definitions, examples, and non-examples, they can draw their own pictures on a whiteboard app, take a screenshot, and add them to the slide. They can also search for real-world examples to photograph and add. Once they’re finished, they can easily alphabetize their entries by rearranging the slides.

    5. Use QR codes
    Our math word wall has QR codes linking to the definitions of each term so students can quiz themselves about the meaning of a term or review terms they’ve forgotten. If you click on the image below, you can get a freebie example of this for the properties of multiplication.

    My complete sets for grade 4, grade 5, and 4/5 combo are available at my TpT store.

    We’ve also written riddles in Geometry where students could scan a QR code to find the answer. You can read my post about that here.

    And we’ve used QR codes to help check homework assignments. I’ve written about that here.

    I’m really just scratching the surface here — there are so many other possibilities and several math specific apps to use, but I’ll save those for future posts. I’m excited to read other examples of integrating technology into math, though, and if you haven’t visited the linky yet, you definitely should. I got so many great ideas for reading and writing from it last week!

    How do you use technology in Math?

    Reminder: Diablo II – 2014 Ladder Reset is May 27th

    That’s right, this is just a quick reminder that tomorrow is the Diablo 2 Ladder Reset for 2014!
    So get ready – stock up on energy drink and tell your friends you won’t see them much for the next while – and get on that Ladder! Have fun playing, my wonderful readers – and enjoy being on the Top Of The Heap
    (at least until the botters get going)
    See You In The Games!

    My Trip to Bangladesh June 2011. Cont…..

    The assignment is now over; managed to progress the milestones without much trouble given that I lost a total of 4 days to strikes. The draft evaluation report was well accepted by the client; now comes the tricky part getting comments on the report. There are basically 2 types of comments that a consultant is likely to get on a report. The first being, comments regarding the structure / formatting and style of the report and some times regarding the language. We have all had different educations and are used to a particular vocabulary; further at some point in our lives we have written a report and we generally stick to that structure while accommodating subject related topics. My rule of thumb is that I give in to these requests as it is just not worth the discussion regarding it. I prefer to use that time for some thing else. The second being, comments regarding the contents such as findings, recommendations etc. Here I generally play hard ball, unless I am presented with an argument backed by facts / proof. This goes to the hart of your position as an independent, unbiased professional consultant. I look forward to these comments as they challenge your thinking and help you to be a better consultant as well. I am supposed to get all the comments by next Friday as the end of the assignment / submission of the final report scheduled after 2 days of receiving all the comments.
    During my last week in Dhaka my health deteriorated (food poisoning). My fault for eating some pastries (short eats) offered to me during a meeting. Momentary laps of concentration. . I have been coming to Bangladesh since 2006 and this is the first time this happened to me. My dread was the journey back to Colombo which I made with the aid of Imodium. I know this drug is banned in some countries but it is a life saver when traveling.
    I do not have any other assignments lined up at this moment. Now that I am back in Colombo I need to tie up some outstanding issues. These are in fact 3 reports, 1) finalizing the report for the current Bangladesh Assignment, 2) finalize the Strategic Plan for my client in Batticaloa and 3) Submit a reflection I did for myself for the institute of consulting.

    Globesity

    THE RISKS FROM OBESITY

    Being overweight can induce:

    ¨ Diabetes (type 2: non-insulin‑dependent)

    ¨ Coronary heart disease and strokes.

    It increases the risks of:

    ¨ Cancer of the colon, prostate, uterus, cervix, breasts and ovaries

    ¨ Gall-bladder disease

    ¨ Musculoskeletal disorders and respiratory problems.

    We live in a world where half the population seems to be obsessed by dieting, while the other half is suffering from starvation and malnutrition. We have no control over the natural disasters that leave millions fighting to find enough food to survive, but why is it that so many people — not just in the Western world, but also in developing countries — are becoming overweight, leading to soaring levels of diabetes, cardiovascular disease and certain cancers?

    We may have made huge advances in technology, but we seem to have lost our connection to nature, and nowhere is this better illustrated than in the food we eat. Our meat is sold in sterile packaging, and contains antibiotics, growth hormones and pesticide residue. We eat (well, some of us eat) fruit and vegetables that are sprayed, waxed, dyed and sometimes irradiated to make them look attractive. The grains that form the bulk of many people’s diets are stripped of their fibre and nutrient content. And the milk we drink is pasteurized.

    Diet Start

    Because there is so much choice, so little time and sometimes so little money, many people choose the convenient pre-packaged or fast-food option, rather than insisting on good-quality, naturally produced, locally available produce. They would rather sit and watch a cookery programme on television while eating a TV dinner or a take-out than get into the kitchen and cook a healthy meal for themselves.

    According to the World Health Organization (WHO), in 1995 there were an estimated 200 million obese adults worldwide, and by 2000 that figure had increased to 300 million. But obesity is not just a problem restricted to adults -25 per cent of children and adolescents in the US are overweight. The problem is beginning to replace malnutrition and infectious diseases as the most significant contributor to ill health worldwide. Obesity is now recognized as a disease in its own right, but one that is largely preventable through changes in lifestyle – especially diet.

    A lesson from dietary history

    For years we have been fed the information that a low-fat/high-carbohydrate diet is the healthiest one for us. The ideal ratio, based on our calorie intake, is 55 per cent carbs, 15 per cent protein and 30 per cent fats. This ratio may work for some individuals, but it certainly isn’t right for everyone, particularly those whose carbohydrate intake is based on the wrong sort of carbs.

    One of the most thought-provoking arguments for reducing the amount and type of carbohydrates that we eat is the story of Palaeolithic people. Genetically, there is very little difference between ourselves and our hunter- gatherer ancestors, although our diet has certainly changed.

    Palaeolithic people were treading the Earth thousands of years before we started to cultivate crops and rear animals for food, and according to scientists they existed on a diet that was primarily protein. Between 60 and 90 per cent of their diet consisted of game animals, eggs, birds, reptiles and insects. The rest comprised green leafy vegetables and berries. Obviously they were leading a far more active life than the average 21st-century human being, but their diet must have been in part responsible for their healthy bones, flawless teeth and good musculature.

    It was only at around the time of the agricultural revolution, about 10,000 years ago, that we started to rely on starchy vegetables such as potatoes and cereal crops for the bulk of our diet, and lifestyles became more sedentary. By 4,000 years ago the effects of the change in diet were beginning to be seen in the human body:

    ¨ There was a reduction in people’s stature

    ¨ Dental decay and malformation of the jaw had become widespread

    ¨ Disease and epidemics were starting to shorten the human lifespan.

    Health Concern: FAT?

    The term “fat” includes fats from meat, fish, poultry, and dairy products as well as vegetable oils and the nuts, seeds, and grains from which they have been extracted. There are two basic kinds of fats—saturated, occurring mostly in animal foods (although some vegetable fats such as the kind that coconut contains fall into this category too), and unsaturated, in the form of vegetable oils such as safflower, corn, and sunflower, and in seeds and nuts. Fish tends to contain more unsaturated than saturated fats, meat more saturated than unsaturated.

    Whether saturated or unsaturated, all the fats you eat rapidly form a film around blood cells and platelets, creating a kind of sludge which causes them to stick together. This clumping significantly interferes with circulation by clogging blood vessels and even temporarily closing down small capillaries. As a result, your cells do not receive all the oxygen and nutrients they need to function efficiently. They only run at about 80 percent capacity. This interferes with cell metabolism as well as with the efficient elimination of cellular and tissue wastes.

    Diet Start

    The chemical structure of an unsaturated fatty acid differs from its saturated brother in that at least two of the carbon atoms in its formula are free. This means that they have no hydrogen atoms attached to them, as the molecule of a saturated fatty acid does. It was long thought that while saturated fats were bad for you, unsaturated fats were good. For unsaturated fats have been shown to reduce cholesterol levels in the blood, and therefore were believed to be helpful in preventing arteriosclerosis and coronary heart disease. That is the reason we have been encouraged in the last thirty years or so to include plenty of polyunsaturates in our diet by switching from butter to margarine and vegetable oils. The catch is that although unsaturates do this, like all fats they still raise triglyceride levels (another factor linked with coronary heart disease) and they also create the same clumping as the saturated fats do, which leads to tissue anoxia.

    Women have also lately been encouraged by poorly informed writers to include lots of polyunsaturates in their diet for their beauty’s sake. Unsaturated fatty acids are an important constituent of skin and muscle tissue and so it was thought, quite wrongly, that we need more of them. For what we have not been told is that the chemical structure of unsaturated fats with their free carbon atoms makes them extremely unstable compounds, and that when an unsaturated fat is exposed even to the smallest trace of a catalytic agent it begins a process of autooxidation which results in the fat molecule’s breaking down to produce what are known as free radicals.

    Free radicals are highly reactive particles which, if left unchecked in the presence of oxygen molecules, will form toxic peroxides. These peroxides can damage and destroy cells. They have also been implicated as a primary cause of the aging process itself. When a cell, or the genetic material of a cell, is destroyed by free radicals, the result is something known as a lipofuscin pigment granule—often referred to by biochemists as a “clinker.” With age, ever more cells are damaged or destroyed as tissue degenerates, leading to increase in the number of these pigment granules. This is something you want to avoid in every way you can if you don’t want to look and be old before your time.

    To some extent, the presence of sufficient amounts of an antioxidant such as vitamin E in the system may prevent this from happening, because it minimizes the damage done by free radical chain reactions by breaking the chain. Vitamin E, like other antioxidants, helps block the oxidation that turns fatty acids into harmful peroxides. The more unsaturated fatty acids in your diet, the greater will be your need for the vitamin.

    An interesting dietary survey that was done at the University of California at Irvine looked at over 1,000 patients and examined the degree of wrinkling and crow’s-feet, frown lines, and other indications of skin degeneration such as damage to the collagen and elastin fibers and the irregular pigmentation characteristic of old skin. The subjects ranged in age from seventeen to eighty-one and 76 percent of them were women. Cadvan Griffiths, M.D., the professor of surgery who carried out the study, discovered that there is an undeniable link between marked clinical signs of aging and the intake of unsaturated fats in one’s diet. Those who regularly and frequently included polyunsaturated fats and oils in their diet had marked signs of premature aging. Some looked as much as twenty years older than they were. Very few of those who had made no special effort to eat more polyunsaturates showed any clinical signs of premature aging. Evidence is also accumulating that links free radical reactions to the etiology of cancer, senility, atherosclerosis and hypertension—all of them disorders generally associated with aging. This is all the more reason to limit the amount of every kind of fat you eat to no more than you actually need.

    HOME DESIGN FULL OF COLOR AND INSPIRING

    It was probably what the designers had in mind when you fill this place with colorful decoration items such as floor cushions, rugs and rustic small packages. Because the white background, these elements stand out and create a pleasant visual contrast. The living roo